* problem at boot from doc2000-with grub
@ 2002-08-07 8:48 jay.s
2002-08-08 7:38 ` Frank Oltmanns
0 siblings, 1 reply; 2+ messages in thread
From: jay.s @ 2002-08-07 8:48 UTC (permalink / raw)
To: linux-mtd
hi
I have managed to compile the kernel and the grub, now I can read/write the doc2000 and I also get the grub_firmware which is about 89664 bytes, but still I cannot make the doc boot itself up. Although a previous good how to tell me to doc_loadbios /dev/mtd0 grub_firmware, but I find the doc_firmware space is only about 49k bytes, this 88k one can not inserted into it. I've tried to use dformat5.1 /BDKL0:90k to change the firmware space but I met the old !=1 preblem, but dformat4.2 seems doesn't support the parameter, what shall I do then?
I am using a doc-2000 in a pc104 SBC with phoenix bios.
thans
jay
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: problem at boot from doc2000-with grub
2002-08-07 8:48 problem at boot from doc2000-with grub jay.s
@ 2002-08-08 7:38 ` Frank Oltmanns
0 siblings, 0 replies; 2+ messages in thread
From: Frank Oltmanns @ 2002-08-08 7:38 UTC (permalink / raw)
To: jay.s; +Cc: linux-mtd
Did you try "eraseall /dev/mtd0"? I don't know too much about DiskOnChip,
but I think this should work!? But this would also erase your
bad-block-table,
so use with care.
Frank
--
GMX - Die Kommunikationsplattform im Internet.
http://www.gmx.net
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2002-08-08 7:39 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-08-07 8:48 problem at boot from doc2000-with grub jay.s
2002-08-08 7:38 ` Frank Oltmanns
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox