Re: [PATCH v3 3/3] dt-bindings: memory-controllers: Convert fsl,elbc to YAML

["Rob Herring (Arm)" <robh@kernel.org>]

On Wed, 26 Feb 2025 18:01:42 +0100, J. Neuschäfer wrote:
> Convert the Freescale localbus controller bindings from text form to
> YAML. Compared to the .txt version, the YAML binding contains a new
> usage example with FCM NAND flash, and a full list of compatible strings
> based on current usage in arch/powerpc/boot/dts/.
> 
> Note that the both the compatible strings and the unit address format
> are kept as-is, for compatibility with existing kernels and device
> trees, as well as unit address readability. This results in dts
> validation warnings:
> 
>   Warning (simple_bus_reg): /example-0/localbus@f0010100/board-control@1,0:
>   simple-bus unit address format error, expected "100000000"
> 
> Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
> ---
> 
> V3:
> - move this patch after the GPCM/FCM patches to dtschema/dtc warnings
>   due to missing bindings for fsl,elbc-gpcm-uio and fsl,elbc-fcm-nand
> - add "simple-bus" again, for compatibility with existing DTs/drivers
>   based on discussion with Crystal Wood and Rob Herring
> - fix fsl,pq2-localbus compatible properties based on mgcoge.dts / ep8248e.dts
>   (was missing "simple-bus")
> - add board-control (bcsr) example again, now using the compatible
>   string listed in Documentation/devicetree/bindings/board/fsl,bcsr.yaml
> - remove interrupt-parent property from example
> - rework the commit message
> 
> V2:
> - fix order of properties in examples, according to dts coding style
> - move to Documentation/devicetree/bindings/memory-controllers
> - clarify the commit message a tiny bit
> - remove unnecessary multiline markers (|)
> - define address format in patternProperties
> - trim subject line (remove "binding")
> - remove use of "simple-bus", because it's technically incorrect
> ---
>  .../bindings/memory-controllers/fsl,elbc.yaml      | 158 +++++++++++++++++++++
>  .../devicetree/bindings/powerpc/fsl/lbc.txt        |  43 ------
>  2 files changed, 158 insertions(+), 43 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/memory-controllers/fsl,elbc.example.dts:29.23-34.15: Warning (simple_bus_reg): /example-0/localbus@f0010100/flash@0,0: simple-bus unit address format error, expected "0"
Documentation/devicetree/bindings/memory-controllers/fsl,elbc.example.dts:36.31-39.15: Warning (simple_bus_reg): /example-0/localbus@f0010100/board-control@1,0: simple-bus unit address format error, expected "100000000"
Documentation/devicetree/bindings/memory-controllers/fsl,elbc.example.dts:41.31-46.15: Warning (simple_bus_reg): /example-0/localbus@f0010100/simple-periph@2,0: simple-bus unit address format error, expected "200000000"
Documentation/devicetree/bindings/memory-controllers/fsl,elbc.example.dts:82.23-89.15: Warning (simple_bus_reg): /example-1/localbus@e0005000/flash@0,0: simple-bus unit address format error, expected "0"
Documentation/devicetree/bindings/memory-controllers/fsl,elbc.example.dts:91.22-97.15: Warning (simple_bus_reg): /example-1/localbus@e0005000/nand@1,0: simple-bus unit address format error, expected "100000000"
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/memory-controllers/fsl,elbc.example.dtb: nand@1,0: $nodename:0: 'nand@1,0' does not match '^nand@[a-f0-9]$'
	from schema $id: http://devicetree.org/schemas/mtd/fsl,elbc-fcm-nand.yaml#

doc reference errors (make refcheckdocs):
Warning: Documentation/devicetree/bindings/display/ssd1289fb.txt references a file that doesn't exist: Documentation/devicetree/bindings/powerpc/fsl/lbc.txt
Documentation/devicetree/bindings/display/ssd1289fb.txt: Documentation/devicetree/bindings/powerpc/fsl/lbc.txt

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250226-ppcyaml-elbc-v3-3-a90ed71da838@posteo.net

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/