Grub support in DiskOnChip.

Grub support in DiskOnChip.

[David Woodhouse]

Grub patches to support NFTL properly have just been contributed. 

See mtd/patches/grub* and send virtual beer to void@dr.com

--
dwmw2




To unsubscribe, send "unsubscribe mtd" to majordomo@infradead.org

Grub support in DiskOnChip.

[Dvir Oren]

David Woodhouse writes ("Grub support in DiskOnChip."):
> Grub patches to support NFTL properly have just been contributed. 
> See mtd/patches/grub* and send virtual beer to void@dr.com

Does this mean that grub can boot DoC?

-- 
Dvir Oren               <dviro@lucidvon.com>
Lucid VON Ltd.     <http://www.lucidvon.com>
9 Saloniki St.,        Tel-Aviv       Israel
Tel:  +972 3 644 3038  Fax:  +972 3 644 3039


To unsubscribe, send "unsubscribe mtd" to majordomo@infradead.org

Re: Grub support in DiskOnChip.

[David Woodhouse]

dvir@lucidvon.com said:
>  Does this mean that grub can boot DoC? 

I assume so - I haven't actually tested it myself but that's the intention 
:)

--
dwmw2




To unsubscribe, send "unsubscribe mtd" to majordomo@infradead.org

Re: Grub support in DiskOnChip.

[Volker Sonn]

Hi,

i cant boot my DOC2000 with grub :-(

I did: (in this order)
- patched grub with the 2 patches in mtd/grub/
- make, make install (of grub)
- copied the pre_stage2 to /mdt/grub
- mdt/grub/make
- doc_loadbios /dev/mtd0 grub_firmware
- nftl_format /dev/mdt0 81920
- fdisk /dev/nftla
- mke2fs /dev/nftla1 -m 0
- copied a kernel and /boot/grub to /nftla1

After rebooting, the grub shell comes up, but i can't access the DOC with something like 
root (dc0,0) etc.
(Booting from (hd0) is possible)

Where I'm wrong ?


> Grub patches to support NFTL properly have just been contributed.

> See mtd/patches/grub* and send virtual beer to void@dr.com

> --
> dwmw2




> To unsubscribe, send "unsubscribe mtd" to majordomo@infradead.org

Re: Grub support in DiskOnChip.

[Kevin Moore]

Hello,

I have an Allwell STB1030N (small form-factor solid state x86 box)
with a 16 MB DOC Millenium, and I'm having difficulties getting grub
to work.  I can't get past the dreaded "DISK BOOT FAILURE..." message
after following essentially the same steps as outlined in the message
below.

I am using a 2.4.0-test9 kernel with "linux/drivers/mtd" and
"linux/include/linux/mtd" directories replaced with those from a
7 Oct, 2000 cvs checkout.  Everything seems fine for mounting, reading,
and writing with /dev/nftla1, so I assume that writing "grub_firmware"
is working.  I am using the grub version 0.5.95 to match the nftl patches
provided with mtd.  I'm using the recommended bios settings for booting
the DOC (SCSI,C), but I've tried the others as well.  Booting off
of a hard-drive or cdrom is no problem.

I tried changing the M-Systems lilo patches (major dev 62 -> 93),
loading doc-lilo, and using the mtd doc_loadbios to load the M-Sys
firmware (doc42.exb), but got the same result.  I need the 2.4.x kernels,
so going completely with their method is not an option.

This must be a problem with the stage1 loader and/or bios, but I'm
at a loss for how to proceed from here.  Any suggestions for what
to try next would be welcome.

Thanks,
Kevin Moore 

> 
> Hi,
> 
> i cant boot my DOC2000 with grub :-(
> 
> I did: (in this order)
> - patched grub with the 2 patches in mtd/grub/
> - make, make install (of grub)
> - copied the pre_stage2 to /mdt/grub
> - mdt/grub/make
> - doc_loadbios /dev/mtd0 grub_firmware
> - nftl_format /dev/mdt0 81920
> - fdisk /dev/nftla
> - mke2fs /dev/nftla1 -m 0
> - copied a kernel and /boot/grub to /nftla1
> 
> After rebooting, the grub shell comes up, but i can't access the DOC
> with something like root (dc0,0) etc.
> (Booting from (hd0) is possible)
> 
> Where I'm wrong ?
> 
> 
> > Grub patches to support NFTL properly have just been contributed.
> 
> > See mtd/patches/grub* and send virtual beer to void@dr.com
> 
> > --
> > dwmw2



To unsubscribe, send "unsubscribe mtd" to majordomo@infradead.org

Re: Grub support in DiskOnChip.

[David Woodhouse]

mlist@sonn-online.de said:
>  After rebooting, the grub shell comes up, but i can't access the DOC
> with something like  root (dc0,0) etc. (Booting from (hd0) is
> possible)

> Where I'm wrong ? 

Doesn't look like you did anything wrong. What did Grub say when you told 
it root=(dc0,0) ?

--
dwmw2




To unsubscribe, send "unsubscribe mtd" to majordomo@infradead.org

Re: Grub support in DiskOnChip.

[David Woodhouse]

kevin@moore-and-moore.com said:
> I have an Allwell STB1030N (small form-factor solid state x86 box)
> with a 16 MB DOC Millenium, and I'm having difficulties getting grub
> to work. 

Grub doesn't yet support the DiskOnChip Millennium. It shouldn't be 
difficult to fix that, it's just that I did my development on DiskOnChip 
2000.

First you need to add Millennium support to Grub itself - you can boot Grub
from a floppy to test this. Once Grub can detect and read the DiskOnChip,
you also need to add Millennium support to the Grub loader found in the 
grub/ directory of my CVS tree. 


--
dwmw2




To unsubscribe, send "unsubscribe mtd" to majordomo@infradead.org

Re: Grub support in DiskOnChip.

[Kevin Moore]

On Mon, 09 Oct 2000 02:07:54 David Woodhouse wrote:
> 
> Grub doesn't yet support the DiskOnChip Millennium. It shouldn't be 
> difficult to fix that, it's just that I did my development on DiskOnChip 
> 2000.
> 
> First you need to add Millennium support to Grub itself - you can boot Grub
> from a floppy to test this. Once Grub can detect and read the DiskOnChip,
> you also need to add Millennium support to the Grub loader found in the 
> grub/ directory of my CVS tree. 
> 

I now have grub successfully detecting the DoC Millennium and (almost)
booting the kernel.  Everything goes great until the kernel looks
for a filesystem, at which point it says:

Kernel panic: I have no root and I want to scream

This is with the same kernel that works fine for access to the DoC
when booted off the hard drive (all built-ins, no modules).  The mtd
files are from a cvs checkout I made on 7 October.  The grub commands
I use are:

root (dc0,0)
kernel /boot/vmlinuz-2.4.0-test9 root=/dev/nftla1
boot

The flash chips are detected fine during boot-up and 4 lines above
the kernel panic I see:

 nftla: nftla1

Also, the /dev directory on the DoC is populated.  If I specify the
root as "root=/dev/hda1", then I can boot using the kernel on the
DoC and the root filesystem on the hard drive.  It seems like I'm
close.

Three questions:
- Does anybody have suggestions on what the problem is or how to
  debug this?  Could I be leaving the DoC in a bad state exiting
  grub even though the kernel seems to detect it okay?
- Thinking past this, does anybody have suggestions on what needs
  to be changed in the grub loader to support DoC Millennium?  I've
  not done much x86 assembly, but I'm willing to give it a shot.
- I've gotten this far by looking at doc2000.c, doc2001.c, and nftl.c
  from the kernel driver.  I saw many comments starting with "see
  software requirement..."  I've searched the M-systems website,
  and haven't found any docs that look like this.  Can somebody
  point me to the proper documentation?

thanks,

Kevin



To unsubscribe, send "unsubscribe mtd" to majordomo@infradead.org