Re: Millennium

Re: Millennium

[Ian]

Yep - that's cool.  That was in the AppNote Ollie referred me to (and I think it mentions 
that somewhere on their utils disk ... or the notes that go with it).



  ----- Original Message -----
>From: "David Woodhouse" <dwmw2@infradead.org>
>To: "Ian" <Relativity@humanheuristic.com>
>Subject:  Re: Millennium
>Date: Wed, 06 Dec 2000 10:44:19 +0000
>
> 
> Relativity@HumanHeuristic.com said:
> >  Is there any firmware required on the DoC2001 to make it perform its
> > 8 x bootblock  memory magic?  .. or is it all done in glue logic?
> 
> Note that writing new stuff into the flash doesn't automatically update the 
> IPL RAM. You need to power cycle the device before your new code actually 
> appears in the RAM - resetting the host board doesn't necessarily work.
> 
> --
> dwmw2
> 
> 
> 

--
http://HumanHeuristic.com/
"Bringing people together in a world full of computers"



To unsubscribe, send "unsubscribe mtd" to majordomo@infradead.org

Re: Millennium

[Ian]

> No, it's in glue logic tied initially to DoC reset pin. I'm 99.99% certain
> about that. If anyone says otherwise I'd be VERY surprised. My sources
> M-Systems docs & mtd code.
Actually .. as much as I thought that would make me feel better ... it makes
me suspect the hardware ... I'll have to order another one in the morning ..
something simple and stupid is causing me a lot of extra heartache ... I'm
left with very little to check ...
 

--
http://HumanHeuristic.com/
"Bringing people together in a world full of computers"



To unsubscribe, send "unsubscribe mtd" to majordomo@infradead.org

Millennium

[Ian]

Is there any firmware required on the DoC2001 to make it perform its 8 x bootblock 
memory magic?  .. or is it all done in glue logic?

If the answer to that is an overwhelmingly loud "Well DUH .. of course it requires firmware 
to do its bootblock magic", then Q2 is;

  Isn't that firmware going to be blown away whenever I go to write over the first 1024
bytes .? .. ie .. "doc_loadbios", and the "erase /dev/mtd0 0 128" are both wiping out 8k
of DoC from its origin ...


Thanks in advance ...

--
http://HumanHeuristic.com/
"Bringing people together in a world full of computers"



To unsubscribe, send "unsubscribe mtd" to majordomo@infradead.org

Re: Millennium

[Levi Khatskevitch]

On Tue, 05 Dec 2000, Ian wrote:
> Is there any firmware required on the DoC2001 to make it perform its 8 x bootblock 
> memory magic?  .. or is it all done in glue logic?
> 

No, it's in glue logic tied initially to DoC reset pin. I'm 99.99% certain
about that. If anyone says otherwise I'd be VERY surprised. My sources
M-Systems docs & mtd code.

- Levi

-- 
Levi Khatskevitch
CTO
Cachier, Corp.
575 Grand St., Suite E306
New York, NY 10002


To unsubscribe, send "unsubscribe mtd" to majordomo@infradead.org

Re: Millennium

[David Woodhouse]

Relativity@HumanHeuristic.com said:
>  Is there any firmware required on the DoC2001 to make it perform its
> 8 x bootblock  memory magic?  .. or is it all done in glue logic?

Note that writing new stuff into the flash doesn't automatically update the 
IPL RAM. You need to power cycle the device before your new code actually 
appears in the RAM - resetting the host board doesn't necessarily work.

--
dwmw2




To unsubscribe, send "unsubscribe mtd" to majordomo@infradead.org