RE: SmartMedia Card Flash File System

RE: SmartMedia Card Flash File System

[Peter Blum]

You are write. But it is fat12 on top of a kind of maping 
from logical sector numbers to physical page numbers within
the SmartMedia.
This maping is made in my PCMCIA card making the SmartMedia
Card look like an IDE drive.

Peter

>
> 
> I think it is fat12.
> 
> K.D.
> 
> > -----Original Message-----
> > From: Peter Blum [mailto:pb@tritec.de]
> > Sent: 5. júlí 2001 12:32
> > To: linux-mtd@lists.infradead.org
> > Subject: SmartMedia Card Flash File System
> > 
> > 
> > Hello,
> > 
> > does anybody know what kind of flash file system is used for
> > SmartMedia Card?
> > 
> > I got a driver working on 2.4.5 ppc kernel and can use the mtdchar
> > device to read the raw contens of the card. It seems that neither ftl
> > nor nftl can't be used.
> > 
> > 
> > Peter
> > 
> > _____________________________________________________________________
> > Peter Blum                                 Tel. +49 (6131) 922 237
> > Tritec Electronic AG                        Fax +49 (6131) 922 229
> > Carl-Zeis-Strasse 41                      email Peter.Blum@tritec.de
> > D-55129 Mainz                               URL http://www.tritec.de
> > 
> > 
> > 
> > ______________________________________________________
> > Linux MTD discussion mailing list
> > http://lists.infradead.org/mailman/listinfo/linux-mtd/
> > 

_____________________________________________________________________
Peter Blum                                 Tel. +49 (6131) 922 237
Tritec Electronic AG                        Fax +49 (6131) 922 229
Carl-Zeis-Strasse 41                      email Peter.Blum@tritec.de
D-55129 Mainz                               URL http://www.tritec.de

RE: SmartMedia Card Flash File System

[Kári Davíðsson]

I think it is fat12.

K.D.

> -----Original Message-----
> From: Peter Blum [mailto:pb@tritec.de]
> Sent: 5. júlí 2001 12:32
> To: linux-mtd@lists.infradead.org
> Subject: SmartMedia Card Flash File System
> 
> 
> Hello,
> 
> does anybody know what kind of flash file system is used for
> SmartMedia Card?
> 
> I got a driver working on 2.4.5 ppc kernel and can use the mtdchar
> device to read the raw contens of the card. It seems that neither ftl
> nor nftl can't be used.
> 
> 
> Peter
> 
> _____________________________________________________________________
> Peter Blum                                 Tel. +49 (6131) 922 237
> Tritec Electronic AG                        Fax +49 (6131) 922 229
> Carl-Zeis-Strasse 41                      email Peter.Blum@tritec.de
> D-55129 Mainz                               URL http://www.tritec.de
> 
> 
> 
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
> 

SmartMedia Card Flash File System

[Peter Blum]

Hello,

does anybody know what kind of flash file system is used for
SmartMedia Card?

I got a driver working on 2.4.5 ppc kernel and can use the mtdchar
device to read the raw contens of the card. It seems that neither ftl
nor nftl can't be used.


Peter

_____________________________________________________________________
Peter Blum                                 Tel. +49 (6131) 922 237
Tritec Electronic AG                        Fax +49 (6131) 922 229
Carl-Zeis-Strasse 41                      email Peter.Blum@tritec.de
D-55129 Mainz                               URL http://www.tritec.de