From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from auucp0.ams.ops.eu.uu.net ([195.129.70.39]) by pentafluge.infradead.org with esmtp (Exim 3.22 #1 (Red Hat Linux)) id 16SdRi-0005sX-00 for ; Mon, 21 Jan 2002 12:21:06 +0000 Received: from pc374 ([172.17.100.163]) by enterprise.chess.nl (8.8.8+Sun/8.8.8) with SMTP id MAA19110 for ; Mon, 21 Jan 2002 12:37:36 +0100 (MET) Message-Id: <200201211137.MAA19110@enterprise.chess.nl> Date: Mon, 21 Jan 2002 12:37:06 +0100 To: linux-mtd@lists.infradead.org From: Jeroen Roose Subject: Intel C3 chips Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: linux-mtd-admin@lists.infradead.org Errors-To: linux-mtd-admin@lists.infradead.org List-Help: List-Post: List-Subscribe: , List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: Hello, We've got a board based on the CDB89712 but using C3 (TE28F320/C3BC90) in stead of the B3 version. The C3 chip locks all blocks on chip reset. I've patched the bootloader (hermit) to unlock all blocks on boot. I've got MTD/JFFS2 working on the board, with the bootloader patch, but I think MTD should unlock the blocks. I'm not familiar with the MTD architecture, so I don't no how/where to implement this, can You help me to point this out ? Thanks, Jeroen Roose chess eT http://www.chess.nl