Re: diskonchip2000 support in 2.4.22

[Andre Sodermans <andreesje_werk@yahoo.com>]

I rebuilt my kernel 2.4.22 after patching it with
mtd-snapshot-20040508.
I used the following config flags:

# Memory Technology Devices (MTD)
#
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_PARTITIONS is not set
# CONFIG_MTD_CONCAT is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_CHAR=m
# CONFIG_MTD_BLOCK is not set
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
# CONFIG_INFTL is not set

#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
# CONFIG_MTD_GEN_PROBE is not set
# CONFIG_MTD_CFI_INTELEXT is not set
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
# CONFIG_MTD_CFI_UTIL is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# CONFIG_MTD_OBSOLETE_CHIPS is not set
# CONFIG_MTD_AMDSTD is not set
# CONFIG_MTD_SHARP is not set
# CONFIG_MTD_JEDEC is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_PNC2000 is not set
# CONFIG_MTD_SC520CDP is not set
# CONFIG_MTD_NETSC520 is not set
# CONFIG_MTD_SBC_GXX is not set
# CONFIG_MTD_ELAN_104NC is not set
# CONFIG_MTD_DILNETPC is not set
# CONFIG_MTD_OCTAGON is not set
# CONFIG_MTD_VMAX is not set
# CONFIG_MTD_SCx200_DOCFLASH is not set
# CONFIG_MTD_L440GX is not set
# CONFIG_MTD_AMD76XROM is not set
# CONFIG_MTD_ICHXROM is not set
# CONFIG_MTD_NETtel is not set
# CONFIG_MTD_SCB2_FLASH is not set
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PCMCIA is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set
CONFIG_MTD_DOC2000=m
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_DOCPROBE=m
# CONFIG_MTD_DOCPROBE_ADVANCED is not set
CONFIG_MTD_DOCPROBE_ADDRESS=0
# CONFIG_MTD_DOCPROBE_HIGH is not set
# CONFIG_MTD_DOCPROBE_55AA is not set

#
# NAND Flash Device Drivers
#
# CONFIG_MTD_NAND is not set
CONFIG_MTD_NAND_IDS=m


Then after bootup, I run:
modprobe -a doc2000 nftl mtdchar mtdblock
modprobe -a docprobe

Here is the output from dmesg:


NFTL driver: nftlcore.c $Revision: 1.94 $, nftlmount.c
$Revision: 1.34 $
Refusing to drive DiskOnChip 2000 TSOP until Bad Block
Table is correctly supported by INFTL
No recognised DiskOnChip devices found

What am I missing?



	
		
__________________________________
Do you Yahoo!?
Win a $20,000 Career Makeover at Yahoo! HotJobs  
http://hotjobs.sweepstakes.yahoo.com/careermakeover