* Re: [uClinux-dev] MTD/uclinux help
[not found] ` <4312DC61.2040701@eptar.com>
@ 2005-09-01 15:02 ` itche
0 siblings, 0 replies; 2+ messages in thread
From: itche @ 2005-09-01 15:02 UTC (permalink / raw)
To: uClinux development list; +Cc: linux-mtd
Hello all,
first of, i would like to thank Greg and Claudio, without your help guys i
wouldn't be able to get to this stage, thanks a bunch.
at this point my system is recognizing the Nand device properly, and assigning
3 MTD devices for the 3 partitions I've created.
however when i try to do eraseall /dev/MTD# the system hangs.
even when i try to do nandtest /dev/MTD# the system hangs just after asking me
if i want to continue (because it erases the first block).
i am using 4.2.19 kernel (heavily modified for my hardware)
any help will be appreciated.
thanks in advance
Isack
On Monday 29 August 2005 05:58, Claudio Lanconelli wrote:
> Hi Isack,
>
> I'm using uClinux-2_4_31_uc0. I build my custom hardware interface based
> on edb7312.c
> It seems to work with generic NAND 32MB 3,3V parameters in nand_ids.c so
> I don't add any IDs.
>
> This is what my bootlog:
>
> MBOPB scan for NAND...
> NAND device: Manufacture ID: 0xec, Chip ID: 0x75 (Samsung NAND 32MB 3,3V)
> Using static partition definition
> Creating 3 MTD partitions on "NAND 32MB 3,3V":
> 0x00000000-0x00400000 : "MBOPB NandFlash partition 1"
> 0x00400000-0x00800000 : "MBOPB NandFlash partition 2"
> 0x00800000-0x02000000 : "MBOPB NandFlash partition 3"
>
> This is the content of nand_ids.h
> static struct nand_flash_dev nand_flash_ids[] = {
> {"Toshiba TC5816BDC", NAND_MFR_TOSHIBA, 0x64, 21, 1, 2, 0x1000},
> {"Toshiba TC5832DC", NAND_MFR_TOSHIBA, 0x6b, 22, 0, 2, 0x2000},
> {"Toshiba TH58V128DC", NAND_MFR_TOSHIBA, 0x73, 24, 0, 2, 0x4000},
> {"Toshiba TC58256FT/DC", NAND_MFR_TOSHIBA, 0x75, 25, 0, 2, 0x4000},
> {"Toshiba TH58512FT", NAND_MFR_TOSHIBA, 0x76, 26, 0, 3, 0x4000},
> {"Toshiba TC58V32DC", NAND_MFR_TOSHIBA, 0xe5, 22, 0, 2, 0x2000},
> {"Toshiba TC58V64AFT/DC", NAND_MFR_TOSHIBA, 0xe6, 23, 0, 2, 0x2000},
> {"Toshiba TC58V16BDC", NAND_MFR_TOSHIBA, 0xea, 21, 1, 2, 0x1000},
> {"Samsung KM29N16000", NAND_MFR_SAMSUNG, 0x64, 21, 1, 2, 0x1000},
> {"Samsung unknown 4Mb", NAND_MFR_SAMSUNG, 0x6b, 22, 0, 2, 0x2000},
> {"Samsung KM29U128T", NAND_MFR_SAMSUNG, 0x73, 24, 0, 2, 0x4000},
> {"Samsung KM29U256T", NAND_MFR_SAMSUNG, 0x75, 25, 0, 2, 0x4000},
> {"Samsung KM29V512000", NAND_MFR_SAMSUNG, 0x76, 26, 0, 3, 0x4000},
> {"Samsung KM29V1024000", NAND_MFR_SAMSUNG, 0x79, 27, 0, 3, 0x4000},
> {"Samsung KM29W32000", NAND_MFR_SAMSUNG, 0xe3, 22, 0, 2, 0x2000},
> {"Samsung KM29N32000", NAND_MFR_SAMSUNG, 0xe5, 22, 0, 2, 0x2000},
> {"Samsung KM29U64000", NAND_MFR_SAMSUNG, 0xe6, 23, 0, 2, 0x2000},
> {"Samsung KM29W16000", NAND_MFR_SAMSUNG, 0xea, 21, 1, 2, 0x1000},
> {NULL,}
> };
>
> and nand_ids.c
> struct nand_flash_dev nand_flash_ids[] = {
> {"NAND 1MB 5V", 0x6e, 20, 0x1000, 1}, // 1Mb 5V
> {"NAND 2MB 5V", 0x64, 21, 0x1000, 1}, // 2Mb 5V
> {"NAND 4MB 5V", 0x6b, 22, 0x2000, 0}, // 4Mb 5V
> {"NAND 1MB 3,3V", 0xe8, 20, 0x1000, 1}, // 1Mb 3.3V
> {"NAND 1MB 3,3V", 0xec, 20, 0x1000, 1}, // 1Mb 3.3V
> {"NAND 2MB 3,3V", 0xea, 21, 0x1000, 1}, // 2Mb 3.3V
> {"NAND 4MB 3,3V", 0xd5, 22, 0x2000, 0}, // 4Mb 3.3V
> {"NAND 4MB 3,3V", 0xe3, 22, 0x2000, 0}, // 4Mb 3.3V
> {"NAND 4MB 3,3V", 0xe5, 22, 0x2000, 0}, // 4Mb 3.3V
> {"NAND 8MB 3,3V", 0xd6, 23, 0x2000, 0}, // 8Mb 3.3V
> {"NAND 8MB 3,3V", 0xe6, 23, 0x2000, 0}, // 8Mb 3.3V
> {"NAND 16MB 3,3V", 0x73, 24, 0x4000, 0},// 16Mb 3,3V
> {"NAND 32MB 3,3V", 0x75, 25, 0x4000, 0}, // 32Mb 3,3V
> {"NAND 64MB 3,3V", 0x76, 26, 0x4000, 0}, // 64Mb 3,3V
> {"NAND 128MB 3,3V", 0x79, 27, 0x4000, 0}, // 128Mb 3,3V
> {NULL,}
> };
>
> struct nand_manufacturers nand_manuf_ids[] = {
> {NAND_MFR_TOSHIBA, "Toshiba"},
> {NAND_MFR_SAMSUNG, "Samsung"},
> {NAND_MFR_FUJITSU, "Fujitsu"},
> {NAND_MFR_NATIONAL, "National"},
> {0x0, "Unknown"}
> };
>
> Cheers,
> Claudio Lanconelli
>
> itche wrote:
> >On Friday 26 August 2005 11:09, Claudio Lanconelli wrote:
> >Hi Claudio,
> >Thanks for answering.
> >I'm using 2.4.
> >what parameters are there for this chip in your distribution?
> >Thanks
> >Isack
> >
> >>Hi Isack,
> >>I use the same NAND chip on my board and it works without modifying
> >>nand_ids.h
> >>What is the kernel version you are using?
> >>
> >>Cheers,
> >>Claudio Lanconelli
> >>
> >>itche wrote:
> >>>Hello all
> >>>I am using the following NAND flash device : Samsung K9F5608UOC
> >>>i have tried to add it to the nand_ids.h file with these parameters.
> >>>{"Samsung K9F5608UOC", NAND_MFR_SAMSUNG, 0x75, 25, 0, 2, 0x4000}
> >>>However when i boot i get a kernel panic
> >>>Any ideas?
> >>>thanks in advance
> >>>Isack
> >>>_______________________________________________
> >>>uClinux-dev mailing list
> >>>uClinux-dev@uclinux.org
> >>>http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
> >>>This message was resent by uclinux-dev@uclinux.org
>
> _______________________________________________
> uClinux-dev mailing list
> uClinux-dev@uclinux.org
> http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
> This message was resent by uclinux-dev@uclinux.org
^ permalink raw reply [flat|nested] 2+ messages in thread