From: Ruediger Haertel <hae@port.de>
To: linux-mtd@lists.infradead.org
Subject: DiskOnChip - mount partition
Date: Wed, 7 Sep 2005 11:26:29 +0200 [thread overview]
Message-ID: <200509071126.30256.hae@port.de> (raw)
Hello
I have a DoC Mil+ 16MB. I am using 2.4.27-uc1 with this MTD
configuration:
CONFIG_MTD
CONFIG_MTD_PARTITIONS
CONFIG_MTD_CHAR
CONFIG_INFTL
CONFIG_MTD_DOC2001PLUS
The chip is correctly detected, after I removed the "2 way
interleave" in doc2001plus.c.
Then I did a
nftl_format -b -i /dev/mtd5 98304
and
docfdisk /dev/mtd5 50 0
which should give me /dev/mtd6 and /dev/mtd7 as far as I know.
However accessing /dev/mtd6 with
eraseall /dev/mtd6
says: eraseall: /dev/mtd6: No such device
Device /dev/mtd6 has the following device files:
crw------- 1 0 0 90, 12 /dev/mtd6
brw------- 1 0 0 31, 6 /dev/mtdblock6
crw------- 1 0 0 90, 13 /dev/mtdr6
## snip - boot output
DiskOnChip Millennium Plus found at address 0x40000000
Flash chip found: Manufacturer ID: 98, Chip ID: 73 (Toshiba:NAND
16MB 3,3V)
1 flash chips found. Total DiskOnChip size: 16 MiB
INFTL: inftlcore.c $Revision: 1.13 $, inftlmount.c $Revision:
1.13 $
Partition check:
inftla: unknown partition table
## snap
Do you have any hint what is going wrong or any pointer where I
should look.
--
with best regards / salutations distinguées / Cordiali Saluti /
med vänliga hälsningar / mit freundlichen Gruessen
Ruediger Haertel
+==========================================================
| port GmbH phone +49 345 77755-0
| D-06132 Halle/Saale mailto:service@port.de
| Germany http://www.port.de
| CAN Wiki http://www.CAN-Wiki.info/
| ETHERNET Powerlink http://www.epl-tools.com
| Newsletter: http://www.port.de/register.html
+==========================================================
next reply other threads:[~2005-09-07 9:38 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-09-07 9:26 Ruediger Haertel [this message]
2005-09-09 6:28 ` DiskOnChip - mount partition Kalev Lember
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200509071126.30256.hae@port.de \
--to=hae@port.de \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox