nor flash

nor flash

[yogesh shivabasappa]

Hi

we have  a custom board with nor flash( intel p30) and i'm
registering  the nor flash as mtd chrdev.
mtd->read and mtd->write maps to cfi_intelexread,
cfi_intelexwirte .
1. from the user level how can i write an application program to
access the device.

2. is it possible to use ioctl( ) for operations like
MEMGETINFO, MEMERASE........

regards,

yogesh



________________________________________________
Get your own "800" number
Voicemail, fax, email, and a lot more
http://www.ureach.com/reg/tag

Nor flash

[yogesh shivabasappa]

Hi,


I'm using intel p30 nor flash on our custom board. The nor
device is mapped to boot device. It has bootloader in it . When
powered up it has to invoke  bootloader . I wanted to know how
the flow will be 

regards 

yogesh

________________________________________________
Get your own "800" number
Voicemail, fax, email, and a lot more
http://www.ureach.com/reg/tag

nor flash

[yogesh shivabasappa]

Hi 

I'm using intel p30 nor flash in one of my project. for uboot
loader how can i do read and write to nor flash with out using
file system.

regards

spurthi

________________________________________________
Get your own "800" number
Voicemail, fax, email, and a lot more
http://www.ureach.com/reg/tag

Re: nor flash

[Daniel Ann]

I think you gonna have to elaborate on that, if you want advice from
others. So far, there just aint enuf info in your email.

On 10/13/05, yogesh shivabasappa <yogesh@ureach.com> wrote:
> Hi
>
> I'm using intel p30 nor flash in one of my project. for uboot
> loader how can i do read and write to nor flash with out using
> file system.
>
> regards
>
> spurthi
>
> ________________________________________________
> Get your own "800" number
> Voicemail, fax, email, and a lot more
> http://www.ureach.com/reg/tag
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
>


--
Daniel

Re: nor flash

[Jörn Engel]

On Thu, 13 October 2005 16:53:41 +0900, Daniel Ann wrote:
> 
> I think you gonna have to elaborate on that, if you want advice from
> others. So far, there just aint enuf info in your email.

It is preferred to have the reply below quoted text.  More to the
point, though, this is not the correct list for u-boot related
questions.  ppc-embedded is slightly better, but I'm sure there is a
dedicated u-boot mailing list as well.

> On 10/13/05, yogesh shivabasappa <yogesh@ureach.com> wrote:
> >
> > I'm using intel p30 nor flash in one of my project. for uboot
> > loader how can i do read and write to nor flash with out using
> > file system.

Jörn

-- 
"Error protection by error detection and correction."
-- from a university class