From mboxrd@z Thu Jan  1 00:00:00 1970
Received: from gprs189-60.eurotel.cz ([160.218.189.60] helo=amd.ucw.cz)
	by pentafluge.infradead.org with esmtp (Exim 4.54 #1 (Red Hat Linux))
	id 1EaCCM-00031X-0i
	for linux-mtd@lists.infradead.org; Thu, 10 Nov 2005 13:10:40 +0000
Date: Thu, 10 Nov 2005 14:09:30 +0100
From: Pavel Machek <pavel@ucw.cz>
To: David Vrabel <dvrabel@cantab.net>
Message-ID: <20051110130930.GJ2401@elf.ucw.cz>
References: <20051109221712.GA28385@elf.ucw.cz> <4372B7A8.5060904@mvista.com>
	<20051110095050.GC2021@elf.ucw.cz>
	<1131616948.27347.174.camel@baythorne.infradead.org>
	<20051110103823.GB2401@elf.ucw.cz>
	<1131619903.27347.177.camel@baythorne.infradead.org>
	<20051110105954.GE2401@elf.ucw.cz>
	<1131621090.27347.184.camel@baythorne.infradead.org>
	<20051110120708.GG2401@elf.ucw.cz> <437344E0.9040502@cantab.net>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <437344E0.9040502@cantab.net>
Cc: linux-mtd@lists.infradead.org, David Woodhouse <dwmw2@infradead.org>,
	kernel list <linux-kernel@vger.kernel.org>
Subject: Re: latest mtd changes broke collie
List-Id: Linux MTD discussion mailing list <linux-mtd.lists.infradead.org>
List-Unsubscribe: <http://lists.infradead.org/mailman/listinfo/linux-mtd>,
	<mailto:linux-mtd-request@lists.infradead.org?subject=unsubscribe>
List-Archive: <http://lists.infradead.org/pipermail/linux-mtd>
List-Post: <mailto:linux-mtd@lists.infradead.org>
List-Help: <mailto:linux-mtd-request@lists.infradead.org?subject=help>
List-Subscribe: <http://lists.infradead.org/mailman/listinfo/linux-mtd>,
	<mailto:linux-mtd-request@lists.infradead.org?subject=subscribe>

Hi!

> > Ok, I got a little bit more forward.
> > 
> > I created entry like this:
> >         {
> >                 .mfr_id         = 0x00b0,
> >                 .dev_id         = 0x00b0,
> >                 .name           = "Collie hack",
> >                 .uaddr          = {
> >                         [0] = MTD_UADDR_UNNECESSARY,    /* x8 */
> >                 },
> >                 .DevSize        = SIZE_4MiB,
> >                 .CmdSet         = P_ID_INTEL_EXT,
> >                 .NumEraseRegions= 1,
> >                 .regions        = {
> >                         ERASEINFO(0x10000,8),
> >                 }
> > }
> > 
> > (Which is probably wrong, I just made up the data)
> 
> Shouldn't you get hold of the datasheet for the flash chips and fill in
> this information correctly?

I already have working sharp.c driver... And I do not even know
manufacturer of the chip, just its ids.
							Pavel

-- 
Thanks, Sharp!