Re: Problems with getting a nand-flash chip to work

["Håkan Kvist" <hagar@df.lth.se>]

On Fri, Feb 17, 2006 at 10:44:03AM +0100, Håkan Kvist wrote:
> Hi.
> 
> Sorry that I can't be more specific in the topic, but I really don't
> know which part that fails.
> 
> I'm trying to get a nand flash chip to work on a at91rm9200-ek
> development board from atmel, featuring an atmel at91rm9200 (arm9
> based) SoC.
> 
> We have tried to different Nand flash chips:
> * A 4 Gbit, 8-bit bus nand flash chip from Micron
> * A 512 Mbit, 8-bit bus nand flash chip from STMicroelectronics
> 

I belive that I forget to mention that the chip that we are currently 
using is the 512 Mbit chip from STMicroelectronics.

I also have tested the to write directly to the nand with the 
mtd_debug utility.

I've filled the first 4 blocks (65535 bytes) with data, and I can read
it back successfully and verify that it is identical to what I wrote.

What is the next thing I should look into?

Any idea of what I should test/look into would be very appreciated.

regards
Håkan