public inbox for linux-mtd@lists.infradead.org
 help / color / mirror / Atom feed
From: amirhosein jahanbekam <am_jahanbekam@yahoo.com>
To: linux-mtd@lists.infradead.org
Subject: help
Date: Sun, 9 Apr 2006 13:47:24 -0700 (PDT)	[thread overview]
Message-ID: <20060409204724.65884.qmail@web60414.mail.yahoo.com> (raw)

Hi all
I have an 'at91rm9200 development kit'.
Recently, I `ve attached an 'AT45DB642' serial data
flash
to the board and installed uboot via XModem
successfully.
But somethings seemed to go wrong:

Firstly, uboot is not able to erase or unprotect the  
    flash as I tested  several versions of uboot and
also compiled 'u-boot-1.1.2' to be certain that
dataflash options are correctly enabled.
It pretend to work,but really does nothing.

Secondly, after booting via network,linux also is not
able to deal with flash operations, for instance:

--[root@AT91RM9200DK /root]$flash_erase
/dev/mtdblock/1
--Erase Total 1 Units
 but in fact nothing happens.


My linux version is '2.4.27-vrs1-ATMEL' and my mtd
configs are as follow.

 Tanks in advanced.
 
 Amir.H.J


#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
CONFIG_MTD_DEBUG=y
CONFIG_MTD_DEBUG_VERBOSE=0
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_AFS_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# CONFIG_MTD_OBSOLETE_CHIPS is not set
# CONFIG_MTD_AMDSTD is not set
# CONFIG_MTD_SHARP is not set
# CONFIG_MTD_JEDEC is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_NORA is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_CDB89712 is not set
# CONFIG_MTD_SA1100 is not set
# CONFIG_MTD_DC21285 is not set
# CONFIG_MTD_IQ80310 is not set
# CONFIG_MTD_FORTUNET is not set
# CONFIG_MTD_EPXA is not set
# CONFIG_MTD_AUTCPU12 is not set
# CONFIG_MTD_EDB7312 is not set
# CONFIG_MTD_IMPA7 is not set
# CONFIG_MTD_CEIVA is not set
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PCMCIA is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
CONFIG_MTD_AT91_DATAFLASH=y
CONFIG_MTD_AT91_DATAFLASH_CARD=y
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTDRAM_ABS_POS=0
CONFIG_MTD_BLKMTD=y
# CONFIG_MTD_DOC1000 is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOCPROBE is not set

#
# NAND Flash Device Drivers
#
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_AT91_SMARTMEDIA is not set

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

             reply	other threads:[~2006-04-09 20:54 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-04-09 20:47 amirhosein jahanbekam [this message]
  -- strict thread matches above, loose matches on Subject: below --
2001-11-19 20:48 Help dave
2001-11-20 13:19 ` Help David Woodhouse
2001-06-07  9:04 HELP Abraham vd Merwe
2001-06-07  9:35 ` HELP David Woodhouse
2001-06-07  9:43   ` HELP Abraham vd Merwe
2001-06-07  9:44     ` HELP David Woodhouse
2001-06-07  9:47       ` HELP Abraham vd Merwe
2001-06-07  9:48       ` HELP David Woodhouse
2001-06-07  9:51         ` HELP Abraham vd Merwe
2001-06-07 10:16           ` HELP David Woodhouse
2001-06-07 17:21       ` HELP Russ Dill
2001-06-07 20:01         ` HELP David Woodhouse
2001-06-07 14:30     ` HELP Nicolas Pitre
2001-06-07 14:23   ` HELP Nicolas Pitre

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20060409204724.65884.qmail@web60414.mail.yahoo.com \
    --to=am_jahanbekam@yahoo.com \
    --cc=linux-mtd@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox