* Adding a second ChipSelect to Samsung s3c2410 driver
@ 2006-12-20 15:23 Gianluca
0 siblings, 0 replies; only message in thread
From: Gianluca @ 2006-12-20 15:23 UTC (permalink / raw)
To: MTD List
Hello,
I am working on a Samsung SMDK S3C2442 eval board made by Meritech Ltd.
It is based on S3C2440 core with NAND Flash and SDRAM, all embedded into the same SoC,
running at 300Mhz.
This board has an external NAND chip too. The internal nand flash chip select is connected
with microprocessor nFCE chip select line coming from internal NAND Controller,
and the external flash chip select is routed to nGCS5/GPA16 pin.
This NAND mtd/nand driver is working and it is using the s3c2410.c, but it uses only the nFCE as
chip select. Which is the cleanest way to add another chip select (in this case an GPIO line) to this
driver, without breaking the whole word?
Kindest regards,
---
Gianluca Renzi
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-12-20 15:26 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-12-20 15:23 Adding a second ChipSelect to Samsung s3c2410 driver Gianluca
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox