From: Adrian Bunk <bunk@stusta.de>
To: Andrew Morton <akpm@osdl.org>,
Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Cc: linux-mtd@lists.infradead.org, dwmw2@infradead.org,
linux-kernel@vger.kernel.org
Subject: [-mm patch] drivers/mtd/ubi/: possible cleanups
Date: Fri, 19 Jan 2007 19:40:48 +0100 [thread overview]
Message-ID: <20070119184048.GR9093@stusta.de> (raw)
In-Reply-To: <20070111222627.66bb75ab.akpm@osdl.org>
On Thu, Jan 11, 2007 at 10:26:27PM -0800, Andrew Morton wrote:
>...
> Changes since 2.6.20-rc3-mm1:
>...
> git-ubi.patch
>...
> git trees
>...
This patch contains the following possible cleanups:
- make needlessly global code static
- remove the following unused variable:
- debug.c: alloc_prints
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
BTW: Do you really need that many different
CONFIG_MTD_UBI_DEBUG_* options?
drivers/mtd/ubi/cdev.c | 4 +-
drivers/mtd/ubi/debug.c | 57 ++++++++++++++++++----------------------
2 files changed, 28 insertions(+), 33 deletions(-)
--- linux-2.6.20-rc4-mm1/drivers/mtd/ubi/cdev.c.old 2007-01-19 17:49:47.000000000 +0100
+++ linux-2.6.20-rc4-mm1/drivers/mtd/ubi/cdev.c 2007-01-19 17:50:03.000000000 +0100
@@ -47,7 +47,7 @@
static int vol_cdev_open(struct inode *inode, struct file *file);
static int vol_cdev_release(struct inode *inode, struct file *file);
-loff_t vol_cdev_llseek(struct file *file, loff_t offset, int origin);
+static loff_t vol_cdev_llseek(struct file *file, loff_t offset, int origin);
static ssize_t vol_cdev_read(struct file *file, __user char *buf,
size_t count, loff_t * offp);
static ssize_t vol_cdev_write(struct file *file, const char __user *buf,
@@ -224,7 +224,7 @@
* positive offset in case of success and a negative error code in case of
* failure.
*/
-loff_t vol_cdev_llseek(struct file *file, loff_t offset, int origin)
+static loff_t vol_cdev_llseek(struct file *file, loff_t offset, int origin)
{
const struct ubi_vtbl_vtr *vtr;
struct ubi_vol_desc *desc = file->private_data;
--- linux-2.6.20-rc4-mm1/drivers/mtd/ubi/debug.c.old 2007-01-19 17:50:42.000000000 +0100
+++ linux-2.6.20-rc4-mm1/drivers/mtd/ubi/debug.c 2007-01-19 18:43:59.000000000 +0100
@@ -67,74 +67,69 @@
static int vb_err_prints;
#endif
#ifdef CONFIG_MTD_UBI_DEBUG_MSG_UIF
-int uif_prints = 1;
+static int uif_prints = 1;
#else
-int uif_prints;
+static int uif_prints;
#endif
#ifdef CONFIG_MTD_UBI_DEBUG_MSG_CDEV
-int cdev_prints = 1;
+static int cdev_prints = 1;
#else
-int cdev_prints;
+static int cdev_prints;
#endif
#ifdef CONFIG_MTD_UBI_DEBUG_MSG_GLUEBI
-int gluebi_prints = 1;
+static int gluebi_prints = 1;
#else
-int gluebi_prints;
+static int gluebi_prints;
#endif
#ifdef CONFIG_MTD_UBI_DEBUG_MSG_VMT
-int vmt_prints = 1;
+static int vmt_prints = 1;
#else
-int vmt_prints;
+static int vmt_prints;
#endif
#ifdef CONFIG_MTD_UBI_DEBUG_MSG_UPD
-int upd_prints = 1;
+static int upd_prints = 1;
#else
-int upd_prints;
+static int upd_prints;
#endif
#ifdef CONFIG_MTD_UBI_DEBUG_MSG_VTBL
-int vtbl_prints = 1;
+static int vtbl_prints = 1;
#else
-int vtbl_prints;
+static int vtbl_prints;
#endif
#ifdef CONFIG_MTD_UBI_DEBUG_MSG_ACC
-int acc_prints = 1;
+static int acc_prints = 1;
#else
-int acc_prints;
+static int acc_prints;
#endif
#ifdef CONFIG_MTD_UBI_DEBUG_MSG_EBA
-int eba_prints = 1;
+static int eba_prints = 1;
#else
-int eba_prints;
+static int eba_prints;
#endif
#ifdef CONFIG_MTD_UBI_DEBUG_MSG_WL
-int wl_prints = 1;
+static int wl_prints = 1;
#else
-int wl_prints;
+static int wl_prints;
#endif
#ifdef CONFIG_MTD_UBI_DEBUG_MSG_BGT
-int bgt_prints = 1;
+static int bgt_prints = 1;
#else
-int bgt_prints;
-#endif
-#ifdef CONFIG_MTD_UBI_DEBUG_MSG_ALLOC
-int alloc_prints = 1;
-#else
-int alloc_prints;
+static int bgt_prints;
#endif
#ifdef CONFIG_MTD_UBI_DEBUG_MSG_IO
-int io_prints = 1;
+static int io_prints = 1;
#else
-int io_prints;
+static int io_prints;
#endif
#ifdef CONFIG_MTD_UBI_DEBUG_MSG_BLD
-int bld_prints = 1;
+static int bld_prints = 1;
#else
-int bld_prints;
+static int bld_prints;
#endif
#ifdef CONFIG_MTD_UBI_DEBUG_MSG_SCAN
-int scan_prints = 1;
+static int scan_prints = 1;
#else
-int scan_prints;
+static int scan_prints;
#endif
/* If debugging messages should also go to the console */
next parent reply other threads:[~2007-01-19 18:41 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20070111222627.66bb75ab.akpm@osdl.org>
2007-01-19 18:40 ` Adrian Bunk [this message]
2007-01-21 11:23 ` [-mm patch] drivers/mtd/ubi/: possible cleanups Artem Bityutskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070119184048.GR9093@stusta.de \
--to=bunk@stusta.de \
--cc=Artem.Bityutskiy@nokia.com \
--cc=akpm@osdl.org \
--cc=dwmw2@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox