* jffs2, program can't run
@ 2007-02-04 9:57 xun
0 siblings, 0 replies; 4+ messages in thread
From: xun @ 2007-02-04 9:57 UTC (permalink / raw)
To: linux-mtd
Hello：
I use jffs2 on my at91rm9200 board with dataflash, but i find sometimes the program (auto run after mount the filesystem) dies when it open a file on dataflash, even if i reboot the system. But when the program dies, it can run by hand start it.
Could someone can help me. Thank you.
--------------
xun
2007-02-04
^ permalink raw reply [flat|nested] 4+ messages in thread* jffs2, program can't run
@ 2007-02-04 7:32 xun.global
2007-02-04 9:36 ` Artem Bityutskiy
2007-02-04 13:26 ` Doug Kehn
0 siblings, 2 replies; 4+ messages in thread
From: xun.global @ 2007-02-04 7:32 UTC (permalink / raw)
To: linux-mtd
[-- Attachment #1: Type: text/plain, Size: 319 bytes --]
I use jffs2 on my at91rm9200 board with dataflash, but i find sometimes the program (auto run after mount the filesystem) dies when it open a file on dataflash, even if i reboot the system. But when the program dies, it can run by hand start it.
Could someone can help me. Thank you.
xun.global
2007-02-04
[-- Attachment #2: Type: text/html, Size: 911 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: jffs2, program can't run
2007-02-04 7:32 xun.global
@ 2007-02-04 9:36 ` Artem Bityutskiy
2007-02-04 13:26 ` Doug Kehn
1 sibling, 0 replies; 4+ messages in thread
From: Artem Bityutskiy @ 2007-02-04 9:36 UTC (permalink / raw)
To: xun.global; +Cc: linux-mtd
On Sun, 2007-02-04 at 15:32 +0800, xun.global wrote:
[...]
Please, don't send HTML to this list. Read http://david.woodhou.se/email.html.
--
Best regards,
Artem Bityutskiy (Битюцкий Артём)
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: jffs2, program can't run
2007-02-04 7:32 xun.global
2007-02-04 9:36 ` Artem Bityutskiy
@ 2007-02-04 13:26 ` Doug Kehn
1 sibling, 0 replies; 4+ messages in thread
From: Doug Kehn @ 2007-02-04 13:26 UTC (permalink / raw)
To: linux-mtd
Hi,
--- "xun.global" <xun.global@gmail.com> wrote:
> I use jffs2 on my at91rm9200 board with
> dataflash, but i find sometimes the program (auto
> run after mount the filesystem) dies when it open a
> file on dataflash, even if i reboot the system. But
> when the program dies, it can run by hand start it.
> Could someone can help me. Thank you.
>
How does the program die? Segment Fault or failure to
load a library needed by the program?
What kernel version are you using?
Are your observations similar to those reported in:
http://lists.infradead.org/pipermail/linux-mtd/2007-January/017252.html
Regards,
...doug
____________________________________________________________________________________
TV dinner still cooling?
Check out "Tonight's Picks" on Yahoo! TV.
http://tv.yahoo.com/
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2007-02-04 13:26 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-02-04 9:57 jffs2, program can't run xun
-- strict thread matches above, loose matches on Subject: below --
2007-02-04 7:32 xun.global
2007-02-04 9:36 ` Artem Bityutskiy
2007-02-04 13:26 ` Doug Kehn
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox