From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from moutng.kundenserver.de ([212.227.126.186]) by bombadil.infradead.org with esmtp (Exim 4.68 #1 (Red Hat Linux)) id 1J0fOC-0006dr-Q5 for linux-mtd@lists.infradead.org; Fri, 07 Dec 2007 15:45:28 +0000 From: Stefan Roese To: linux-mtd@lists.infradead.org Subject: Re: AMCC NAND controller driver in 2.6.17 Date: Fri, 7 Dec 2007 16:45:15 +0100 References: <3adeeb410712070704g7c09e4aeyb81724f15f93b4af@mail.gmail.com> In-Reply-To: <3adeeb410712070704g7c09e4aeyb81724f15f93b4af@mail.gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200712071645.15697.sr@denx.de> Cc: Ramesh List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On Friday 07 December 2007, Ramesh wrote: > I am using the AMCC PPC 440-EPX board and linux 2.6.17 kernel. The > driver for the built-in NAND controller seems to be the file > sequoia_nand.c. Has anyone seen this working? No, I don't remember such a driver. Or at least I can't remember seeing it. > I am not sure it > programs the EBC registers correctly. Is there a working version of a > driver for the NAND controller? I see ndfc.c in 2.6.19 kernel but I > can't switch kernels yet. Any help is appreciated. The ndfc is what you want. If you can't use a recent kernel version, then you have to backport this driver to your kernel version. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de =====================================================================