From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from lazybastard.de ([212.112.238.170] helo=longford.lazybastard.org) by bombadil.infradead.org with esmtps (Exim 4.68 #1 (Red Hat Linux)) id 1JWsLs-00008S-Q1 for linux-mtd@lists.infradead.org; Wed, 05 Mar 2008 12:04:05 +0000 Date: Wed, 5 Mar 2008 13:03:20 +0100 From: =?utf-8?B?SsO2cm4=?= Engel To: =?utf-8?Q?Schl=C3=A4gl_Manfred_jun=2E?= Subject: Re: MTD and jffs2 mount problem on Linux-2.6.23 rc2 Message-ID: <20080305120320.GH6616@lazybastard.org> References: <1B4F8000449511488D1A640DD6DECA3501EC25E3@MAILBOX0A.psi.ch> <1204710323.3599.12.camel@lisa.alm.archives.at> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <1204710323.3599.12.camel@lisa.alm.archives.at> Cc: linux-mtd@lists.infradead.org, Grant Erickson , Dach Miroslaw List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On Wed, 5 March 2008 10:45:23 +0100, Schlägl Manfred jun. wrote: > Am Mittwoch, den 05.03.2008, 09:24 +0100 schrieb Dach Miroslaw: > > > > losetup /dev/loop0 img2.jffs2 > > mount -t jffs2 /dev/loop0 /mnt > > > > unfortunately mount did not work. > This can't work, because jffs2 is using the block-device mtdblock only > to get device-information about the mtd-device. jffs2 itself is using > the mtd-api directly. so jffs2 only on mtd. Some people use loop and block2mtd to mount jffs2 images. Hardly elegant, but it seems to work. Jörn -- Don't worry about people stealing your ideas. If your ideas are any good, you'll have to ram them down people's throats. -- Howard Aiken quoted by Ken Iverson quoted by Jim Horning quoted by Raph Levien, 1979