* [patch 1/2] MTD: Remove the bast-flash driver.
2008-07-15 10:58 [patch 0/2] S3C24XX updates for 2.6.27-rc1 Ben Dooks
@ 2008-07-15 10:58 ` Ben Dooks
2008-07-15 10:58 ` [patch 2/2] CPUFREQ: S3C24XX NAND driver frequency scaling support Ben Dooks
1 sibling, 0 replies; 4+ messages in thread
From: Ben Dooks @ 2008-07-15 10:58 UTC (permalink / raw)
To: linux-mtd; +Cc: Ben Dooks
[-- Attachment #1: simtec/simtec-drivers-mtd-remove-bastflash.patch --]
[-- Type: text/plain, Size: 7731 bytes --]
Remove the Simtec BAST flash driver as this has been replaced by using
the platform flash driver.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Index: linux-2.6.26-rc3-quilt2/drivers/mtd/maps/Kconfig
===================================================================
--- linux-2.6.26-rc3-quilt2.orig/drivers/mtd/maps/Kconfig 2008-05-19 23:04:02.000000000 +0100
+++ linux-2.6.26-rc3-quilt2/drivers/mtd/maps/Kconfig 2008-05-19 23:45:18.000000000 +0100
@@ -546,24 +546,6 @@ config MTD_DMV182
help
Map driver for Dy-4 SVME/DMV-182 board.
-config MTD_BAST
- tristate "Map driver for Simtec BAST (EB2410ITX) or Thorcom VR1000"
- depends on ARCH_BAST || MACH_VR1000
- select MTD_PARTITIONS
- select MTD_MAP_BANK_WIDTH_16
- select MTD_JEDECPROBE
- help
- Map driver for NOR flash on the Simtec BAST (EB2410ITX), or the
- Thorcom VR1000
-
- Note, this driver *cannot* over-ride the WP link on the
- board, or currently detect the state of the link.
-
-config MTD_BAST_MAXSIZE
- int "Maximum size for BAST flash area (MiB)"
- depends on MTD_BAST
- default "4"
-
config MTD_SHARP_SL
tristate "ROM mapped on Sharp SL Series"
depends on ARCH_PXA
Index: linux-2.6.26-rc3-quilt2/drivers/mtd/maps/Makefile
===================================================================
--- linux-2.6.26-rc3-quilt2.orig/drivers/mtd/maps/Makefile 2008-05-19 23:04:02.000000000 +0100
+++ linux-2.6.26-rc3-quilt2/drivers/mtd/maps/Makefile 2008-05-19 23:45:18.000000000 +0100
@@ -10,7 +10,6 @@ endif
# Chip mappings
obj-$(CONFIG_MTD_CDB89712) += cdb89712.o
obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o
-obj-$(CONFIG_MTD_BAST) += bast-flash.o
obj-$(CONFIG_MTD_CFI_FLAGADM) += cfi_flagadm.o
obj-$(CONFIG_MTD_DC21285) += dc21285.o
obj-$(CONFIG_MTD_DILNETPC) += dilnetpc.o
Index: linux-2.6.26-rc3-quilt2/drivers/mtd/maps/bast-flash.c
===================================================================
--- linux-2.6.26-rc3-quilt2.orig/drivers/mtd/maps/bast-flash.c 2008-05-19 23:04:02.000000000 +0100
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,226 +0,0 @@
-/* linux/drivers/mtd/maps/bast-flash.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Simtec Bast (EB2410ITX) NOR MTD Mapping driver
- *
- * Changelog:
- * 20-Sep-2004 BJD Initial version
- * 17-Jan-2005 BJD Add whole device if no partitions found
- *
- * $Id: bast-flash.c,v 1.5 2005/11/07 11:14:26 gleixner Exp $
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-#include <asm/mach/flash.h>
-
-#include <asm/arch/map.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-cpld.h>
-
-#ifdef CONFIG_MTD_BAST_MAXSIZE
-#define AREA_MAXSIZE (CONFIG_MTD_BAST_MAXSIZE * SZ_1M)
-#else
-#define AREA_MAXSIZE (32 * SZ_1M)
-#endif
-
-#define PFX "bast-flash: "
-
-struct bast_flash_info {
- struct mtd_info *mtd;
- struct map_info map;
- struct mtd_partition *partitions;
- struct resource *area;
-};
-
-static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
-
-static void bast_flash_setrw(int to)
-{
- unsigned int val;
- unsigned long flags;
-
- local_irq_save(flags);
- val = __raw_readb(BAST_VA_CTRL3);
-
- if (to)
- val |= BAST_CPLD_CTRL3_ROMWEN;
- else
- val &= ~BAST_CPLD_CTRL3_ROMWEN;
-
- pr_debug("new cpld ctrl3=%02x\n", val);
-
- __raw_writeb(val, BAST_VA_CTRL3);
- local_irq_restore(flags);
-}
-
-static int bast_flash_remove(struct platform_device *pdev)
-{
- struct bast_flash_info *info = platform_get_drvdata(pdev);
-
- platform_set_drvdata(pdev, NULL);
-
- if (info == NULL)
- return 0;
-
- if (info->map.virt != NULL)
- iounmap(info->map.virt);
-
- if (info->mtd) {
- del_mtd_partitions(info->mtd);
- map_destroy(info->mtd);
- }
-
- kfree(info->partitions);
-
- if (info->area) {
- release_resource(info->area);
- kfree(info->area);
- }
-
- kfree(info);
-
- return 0;
-}
-
-static int bast_flash_probe(struct platform_device *pdev)
-{
- struct bast_flash_info *info;
- struct resource *res;
- int err = 0;
-
- info = kmalloc(sizeof(*info), GFP_KERNEL);
- if (info == NULL) {
- printk(KERN_ERR PFX "no memory for flash info\n");
- err = -ENOMEM;
- goto exit_error;
- }
-
- memzero(info, sizeof(*info));
- platform_set_drvdata(pdev, info);
-
- res = pdev->resource; /* assume that the flash has one resource */
-
- info->map.phys = res->start;
- info->map.size = res->end - res->start + 1;
- info->map.name = pdev->dev.bus_id;
- info->map.bankwidth = 2;
-
- if (info->map.size > AREA_MAXSIZE)
- info->map.size = AREA_MAXSIZE;
-
- pr_debug("%s: area %08lx, size %ld\n", __func__,
- info->map.phys, info->map.size);
-
- info->area = request_mem_region(res->start, info->map.size,
- pdev->name);
- if (info->area == NULL) {
- printk(KERN_ERR PFX "cannot reserve flash memory region\n");
- err = -ENOENT;
- goto exit_error;
- }
-
- info->map.virt = ioremap(res->start, info->map.size);
- pr_debug("%s: virt at %08x\n", __func__, (int)info->map.virt);
-
- if (info->map.virt == 0) {
- printk(KERN_ERR PFX "failed to ioremap() region\n");
- err = -EIO;
- goto exit_error;
- }
-
- simple_map_init(&info->map);
-
- /* enable the write to the flash area */
-
- bast_flash_setrw(1);
-
- /* probe for the device(s) */
-
- info->mtd = do_map_probe("jedec_probe", &info->map);
- if (info->mtd == NULL)
- info->mtd = do_map_probe("cfi_probe", &info->map);
-
- if (info->mtd == NULL) {
- printk(KERN_ERR PFX "map_probe() failed\n");
- err = -ENXIO;
- goto exit_error;
- }
-
- /* mark ourselves as the owner */
- info->mtd->owner = THIS_MODULE;
-
- err = parse_mtd_partitions(info->mtd, probes, &info->partitions, 0);
- if (err > 0) {
- err = add_mtd_partitions(info->mtd, info->partitions, err);
- if (err)
- printk(KERN_ERR PFX "cannot add/parse partitions\n");
- } else {
- err = add_mtd_device(info->mtd);
- }
-
- if (err == 0)
- return 0;
-
- /* fall through to exit error */
-
- exit_error:
- bast_flash_remove(pdev);
- return err;
-}
-
-static struct platform_driver bast_flash_driver = {
- .probe = bast_flash_probe,
- .remove = bast_flash_remove,
- .driver = {
- .name = "bast-nor",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init bast_flash_init(void)
-{
- printk("BAST NOR-Flash Driver, (c) 2004 Simtec Electronics\n");
- return platform_driver_register(&bast_flash_driver);
-}
-
-static void __exit bast_flash_exit(void)
-{
- platform_driver_unregister(&bast_flash_driver);
-}
-
-module_init(bast_flash_init);
-module_exit(bast_flash_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("BAST MTD Map driver");
-MODULE_ALIAS("platform:bast-nor");
--
Ben (ben@fluff.org, http://www.fluff.org/)
'a smiley only costs 4 bytes'
^ permalink raw reply [flat|nested] 4+ messages in thread* [patch 2/2] CPUFREQ: S3C24XX NAND driver frequency scaling support.
2008-07-15 10:58 [patch 0/2] S3C24XX updates for 2.6.27-rc1 Ben Dooks
2008-07-15 10:58 ` [patch 1/2] MTD: Remove the bast-flash driver Ben Dooks
@ 2008-07-15 10:58 ` Ben Dooks
1 sibling, 0 replies; 4+ messages in thread
From: Ben Dooks @ 2008-07-15 10:58 UTC (permalink / raw)
To: linux-mtd; +Cc: Ben Dooks
[-- Attachment #1: simtec/cpufreq/s3c24xx-cpufreq-drivers-nand.patch --]
[-- Type: text/plain, Size: 6161 bytes --]
Add support for CPU frequency scalling to the S3C24XX NAND driver.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Index: linux-2.6.26/drivers/mtd/nand/s3c2410.c
===================================================================
--- linux-2.6.26.orig/drivers/mtd/nand/s3c2410.c 2008-07-15 10:57:41.000000000 +0100
+++ linux-2.6.26/drivers/mtd/nand/s3c2410.c 2008-07-15 11:49:06.000000000 +0100
@@ -52,6 +52,7 @@
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/clk.h>
+#include <linux/cpufreq.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
@@ -120,8 +121,13 @@ struct s3c2410_nand_info {
int sel_bit;
int mtd_count;
unsigned long save_sel;
+ unsigned long clk_rate;
enum s3c_cpu_type cpu_type;
+
+#ifdef CONFIG_CPU_FREQ
+ struct notifier_block freq_transition;
+#endif
};
/* conversion functions */
@@ -179,17 +185,18 @@ static int s3c_nand_calc_rate(int wanted
/* controller setup */
-static int s3c2410_nand_inithw(struct s3c2410_nand_info *info,
- struct platform_device *pdev)
+static int s3c2410_nand_setrate(struct s3c2410_nand_info *info)
{
- struct s3c2410_platform_nand *plat = to_nand_plat(pdev);
- unsigned long clkrate = clk_get_rate(info->clk);
+ struct s3c2410_platform_nand *plat = info->platform;
int tacls_max = (info->cpu_type == TYPE_S3C2412) ? 8 : 4;
int tacls, twrph0, twrph1;
- unsigned long cfg = 0;
+ unsigned long clkrate = clk_get_rate(info->clk);
+ unsigned long set, cfg, mask;
+ unsigned long flags;
/* calculate the timing information for the controller */
+ info->clk_rate = clkrate;
clkrate /= 1000; /* turn clock into kHz for ease of use */
if (plat != NULL) {
@@ -213,26 +220,67 @@ static int s3c2410_nand_inithw(struct s3
switch (info->cpu_type) {
case TYPE_S3C2410:
- cfg = S3C2410_NFCONF_EN;
- cfg |= S3C2410_NFCONF_TACLS(tacls - 1);
- cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
- cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
+ mask = (S3C2410_NFCONF_TACLS(3) |
+ S3C2410_NFCONF_TWRPH0(7) |
+ S3C2410_NFCONF_TWRPH1(7));
+ set = S3C2410_NFCONF_EN;
+ set |= S3C2410_NFCONF_TACLS(tacls - 1);
+ set |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
+ set |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
break;
case TYPE_S3C2440:
case TYPE_S3C2412:
- cfg = S3C2440_NFCONF_TACLS(tacls - 1);
- cfg |= S3C2440_NFCONF_TWRPH0(twrph0 - 1);
- cfg |= S3C2440_NFCONF_TWRPH1(twrph1 - 1);
-
- /* enable the controller and de-assert nFCE */
+ mask = (S3C2410_NFCONF_TACLS(tacls_max - 1) |
+ S3C2410_NFCONF_TWRPH0(7) |
+ S3C2410_NFCONF_TWRPH1(7));
+
+ set = S3C2440_NFCONF_TACLS(tacls - 1);
+ set |= S3C2440_NFCONF_TWRPH0(twrph0 - 1);
+ set |= S3C2440_NFCONF_TWRPH1(twrph1 - 1);
+ break;
- writel(S3C2440_NFCONT_ENABLE, info->regs + S3C2440_NFCONT);
+ default:
+ /* keep compiler happy */
+ mask = 0;
+ set = 0;
+ BUG();
}
dev_dbg(info->device, "NF_CONF is 0x%lx\n", cfg);
+ local_irq_save(flags);
+
+ cfg = readl(info->regs + S3C2410_NFCONF);
+ cfg &= ~mask;
+ cfg |= set;
writel(cfg, info->regs + S3C2410_NFCONF);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+static int s3c2410_nand_inithw(struct s3c2410_nand_info *info)
+{
+ int ret;
+
+ ret = s3c2410_nand_setrate(info);
+ if (ret < 0)
+ return ret;
+
+ switch (info->cpu_type) {
+ case TYPE_S3C2410:
+ default:
+ break;
+
+ case TYPE_S3C2440:
+ case TYPE_S3C2412:
+ /* enable the controller and de-assert nFCE */
+
+ writel(S3C2440_NFCONT_ENABLE, info->regs + S3C2440_NFCONT);
+ }
+
return 0;
}
@@ -513,6 +561,52 @@ static void s3c2440_nand_write_buf(struc
writesl(info->regs + S3C2440_NFDATA, buf, len / 4);
}
+/* cpufreq driver support */
+
+#ifdef CONFIG_CPU_FREQ
+
+static int s3c2410_nand_cpufreq_transition(struct notifier_block *nb,
+ unsigned long val, void *data)
+{
+ struct s3c2410_nand_info *info;
+ unsigned long newclk;
+
+ info = container_of(nb, struct s3c2410_nand_info, freq_transition);
+ newclk = clk_get_rate(info->clk);
+
+ if ((val == CPUFREQ_POSTCHANGE && newclk < info->clk_rate) ||
+ (val == CPUFREQ_PRECHANGE && newclk > info->clk_rate)) {
+ s3c2410_nand_setrate(info);
+ }
+
+ return 0;
+}
+
+static inline int s3c2410_nand_cpufreq_register(struct s3c2410_nand_info *info)
+{
+ info->freq_transition.notifier_call = s3c2410_nand_cpufreq_transition;
+
+ return cpufreq_register_notifier(&info->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info)
+{
+ cpufreq_unregister_notifier(&info->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+#else
+static inline int s3c2410_nand_cpufreq_register(struct s3c2410_nand_info *info)
+{
+ return 0;
+}
+
+static inline void s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info)
+{
+}
+#endif
+
/* device management functions */
static int s3c2410_nand_remove(struct platform_device *pdev)
@@ -524,9 +618,10 @@ static int s3c2410_nand_remove(struct pl
if (info == NULL)
return 0;
- /* first thing we need to do is release all our mtds
- * and their partitions, then go through freeing the
- * resources used
+ s3c2410_nand_cpufreq_deregister(info);
+
+ /* Release all our mtds and their partitions, then go through
+ * freeing the resources used
*/
if (info->mtds != NULL) {
@@ -784,7 +879,7 @@ static int s3c24xx_nand_probe(struct pla
/* initialise the hardware */
- err = s3c2410_nand_inithw(info, pdev);
+ err = s3c2410_nand_inithw(info);
if (err != 0)
goto exit_error;
@@ -827,6 +922,12 @@ static int s3c24xx_nand_probe(struct pla
sets++;
}
+ err = s3c2410_nand_cpufreq_register(info);
+ if (err < 0) {
+ dev_err(&pdev->dev, "failed to init cpufreq support\n");
+ goto exit_error;
+ }
+
if (allow_clk_stop(info)) {
dev_info(&pdev->dev, "clock idle support enabled\n");
clk_disable(info->clk);
@@ -874,7 +975,7 @@ static int s3c24xx_nand_resume(struct pl
if (info) {
clk_enable(info->clk);
- s3c2410_nand_inithw(info, dev);
+ s3c2410_nand_inithw(info);
/* Restore the state of the nFCE line. */
--
Ben (ben@fluff.org, http://www.fluff.org/)
'a smiley only costs 4 bytes'
^ permalink raw reply [flat|nested] 4+ messages in thread