From: Alexander Clouter <alex@digriz.org.uk>
To: linux-mtd@lists.infradead.org
Subject: [MTD] [NAND] add (write|read)_buf callbacks to plat_nand
Date: Wed, 4 Mar 2009 10:00:08 +0000 [thread overview]
Message-ID: <20090304100008.GQ24031@woodchuck> (raw)
This patch adds (write|read)_buf callbacks to plat_nand.
The NAND on the TS-7800 provisioned by the FPGA allows readl() and
writel() to be used which gives a 2.5x speed up. To be able to
use this from the plat_nand driver hooks to write_buf and read_buf
need to be made available. This patch adds those hooks.
Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
---
drivers/mtd/nand/plat_nand.c | 2 ++
include/linux/mtd/nand.h | 4 ++++
2 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c
index 75f9f48..262bede 100644
--- a/drivers/mtd/nand/plat_nand.c
+++ b/drivers/mtd/nand/plat_nand.c
@@ -61,6 +61,8 @@ static int __init plat_nand_probe(struct platform_device *pdev)
data->chip.cmd_ctrl = pdata->ctrl.cmd_ctrl;
data->chip.dev_ready = pdata->ctrl.dev_ready;
data->chip.select_chip = pdata->ctrl.select_chip;
+ data->chip.write_buf = pdata->ctrl.write_buf;
+ data->chip.read_buf = pdata->ctrl.read_buf;
data->chip.chip_delay = pdata->chip.chip_delay;
data->chip.options |= pdata->chip.options;
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index db5b63d..c383dee 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -594,6 +594,10 @@ struct platform_nand_ctrl {
void (*select_chip)(struct mtd_info *mtd, int chip);
void (*cmd_ctrl)(struct mtd_info *mtd, int dat,
unsigned int ctrl);
+ void (*write_buf)(struct mtd_info *mtd,
+ const uint8_t *buf, int len);
+ void (*read_buf)(struct mtd_info *mtd,
+ uint8_t *buf, int len);
void *priv;
};
--
1.6.1.3
reply other threads:[~2009-03-04 10:00 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090304100008.GQ24031@woodchuck \
--to=alex@digriz.org.uk \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox