From: David Brownell <david-b@pacbell.net>
To: Linux MTD <linux-mtd@lists.infradead.org>,
LKML <linux-kernel@vger.kernel.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Subject: [patch/rfc 2.6.29 2/2] MTD: support driver model updates
Date: Thu, 26 Mar 2009 00:42:50 -0700 [thread overview]
Message-ID: <200903260042.50236.david-b@pacbell.net> (raw)
In-Reply-To: <200903260039.34013.david-b@pacbell.net>
From: David Brownell <dbrownell@users.sourceforge.net>
Follow-on patch to the previous driver model patch for the MTD
framework. This one makes various MTD drivers connect to the
driver model tree, so /sys/devices/virtual/mtd/* nodes are no
longer present ... mostly drivers used on boards I have handy.
Based on a patch from Kay Sievers.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
---
drivers/mtd/devices/m25p80.c | 2 ++
drivers/mtd/devices/mtd_dataflash.c | 2 ++
drivers/mtd/maps/omap_nor.c | 2 ++
drivers/mtd/maps/physmap.c | 1 +
drivers/mtd/maps/plat-ram.c | 1 +
drivers/mtd/nand/davinci_nand.c | 2 ++
drivers/mtd/nand/mxc_nand.c | 1 +
drivers/mtd/onenand/omap2.c | 2 ++
8 files changed, 13 insertions(+)
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -678,6 +678,8 @@ static int __devinit m25p_probe(struct s
flash->mtd.erasesize = info->sector_size;
}
+ flash->mtd.dev.parent = &spi->dev;
+
dev_info(&spi->dev, "%s (%lld Kbytes)\n", info->name,
(long long)flash->mtd.size >> 10);
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -670,6 +670,8 @@ add_dataflash_otp(struct spi_device *spi
device->write = dataflash_write;
device->priv = priv;
+ device->dev.parent = &spi->dev;
+
if (revision >= 'c')
otp_tag = otp_setup(device, revision);
--- a/drivers/mtd/maps/omap_nor.c
+++ b/drivers/mtd/maps/omap_nor.c
@@ -115,6 +115,8 @@ static int __init omapflash_probe(struct
}
info->mtd->owner = THIS_MODULE;
+ info->mtd->dev.parent = &pdev->dev;
+
#ifdef CONFIG_MTD_PARTITIONS
err = parse_mtd_partitions(info->mtd, part_probes, &info->parts, 0);
if (err > 0)
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -147,6 +147,7 @@ static int physmap_flash_probe(struct pl
devices_found++;
}
info->mtd[i]->owner = THIS_MODULE;
+ info->mtd[i]->dev.parent = &dev->dev;
}
if (devices_found == 1) {
--- a/drivers/mtd/maps/plat-ram.c
+++ b/drivers/mtd/maps/plat-ram.c
@@ -224,6 +224,7 @@ static int platram_probe(struct platform
}
info->mtd->owner = THIS_MODULE;
+ info->mtd->dev.parent = &pdev->dev;
platram_setrw(info, PLATRAM_RW);
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -358,6 +358,8 @@ static int __init nand_davinci_probe(str
info->mtd.name = dev_name(&pdev->dev);
info->mtd.owner = THIS_MODULE;
+ info->mtd.dev.parent = &pdev->dev;
+
info->chip.IO_ADDR_R = vaddr;
info->chip.IO_ADDR_W = vaddr;
info->chip.chip_delay = 0;
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -866,6 +866,7 @@ static int __init mxcnd_probe(struct pla
mtd = &host->mtd;
mtd->priv = this;
mtd->owner = THIS_MODULE;
+ mtd->dev.parent = &pdev->dev;
/* 50 us command delay time */
this->chip_delay = 5;
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -672,6 +672,8 @@ static int __devinit omap2_onenand_probe
c->mtd.priv = &c->onenand;
c->mtd.owner = THIS_MODULE;
+ c->mtd.dev.parent = &pdev->dev;
+
if (c->dma_channel >= 0) {
struct onenand_chip *this = &c->onenand;
next parent reply other threads:[~2009-03-26 7:52 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200903260039.34013.david-b@pacbell.net>
2009-03-26 7:42 ` David Brownell [this message]
2009-04-01 5:46 ` [patch/rfc 2.6.29 2/2] MTD: support driver model updates Artem Bityutskiy
2009-04-01 5:57 ` David Brownell
2009-04-01 6:10 ` Artem Bityutskiy
2009-04-01 6:42 ` David Brownell
2009-04-01 6:48 ` Artem Bityutskiy
2009-04-01 6:08 ` Vitaly Wool
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200903260042.50236.david-b@pacbell.net \
--to=david-b@pacbell.net \
--cc=kay.sievers@vrfy.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox