From: Ben Dooks <ben-linux@fluff.org>
To: Peter Korsgaard <jacmet@sunsite.dk>
Cc: wookey@wookware.org, linux-mtd@lists.infradead.org,
David.Woodhouse@intel.com, ben-linux@fluff.org,
linux-arm-kernel@lists.arm.linux.org.uk
Subject: Re: [PATCH] mtd/nand: s3c6400 support for s3c2410 driver
Date: Mon, 8 Jun 2009 12:11:21 +0100 [thread overview]
Message-ID: <20090608111120.GA31034@fluff.org.uk> (raw)
In-Reply-To: <1244379863-23581-2-git-send-email-jacmet@sunsite.dk>
On Sun, Jun 07, 2009 at 03:04:23PM +0200, Peter Korsgaard wrote:
> Add s3c6400 support to the s3c2410 driver. The nand controller in
> the s3c64xx devices is compatible with the one in the s3c2412, so
> simply reuse that code.
>
> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Ben Dooks <ben-linux@fluff.org>
> ---
> drivers/mtd/nand/Kconfig | 18 +++++++++---------
> drivers/mtd/nand/s3c2410.c | 3 +++
> 2 files changed, 12 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
> index 890936d..4d63d7b 100644
> --- a/drivers/mtd/nand/Kconfig
> +++ b/drivers/mtd/nand/Kconfig
> @@ -139,27 +139,27 @@ config MTD_NAND_PPCHAMELEONEVB
> This enables the NAND flash driver on the PPChameleon EVB Board.
>
> config MTD_NAND_S3C2410
> - tristate "NAND Flash support for S3C2410/S3C2440 SoC"
> - depends on ARCH_S3C2410
> + tristate "NAND Flash support for Samsung S3C SoCs"
> + depends on ARCH_S3C2410 || ARCH_S3C64XX
> help
> - This enables the NAND flash controller on the S3C2410 and S3C2440
> + This enables the NAND flash controller on the S3C24xx and S3C64xx
> SoCs
>
> No board specific support is done by this driver, each board
> must advertise a platform_device for the driver to attach.
>
> config MTD_NAND_S3C2410_DEBUG
> - bool "S3C2410 NAND driver debug"
> + bool "Samsung S3C NAND driver debug"
> depends on MTD_NAND_S3C2410
> help
> - Enable debugging of the S3C2410 NAND driver
> + Enable debugging of the S3C NAND driver
>
> config MTD_NAND_S3C2410_HWECC
> - bool "S3C2410 NAND Hardware ECC"
> + bool "Samsung S3C NAND Hardware ECC"
> depends on MTD_NAND_S3C2410
> help
> - Enable the use of the S3C2410's internal ECC generator when
> - using NAND. Early versions of the chip have had problems with
> + Enable the use of the controller's internal ECC generator when
> + using NAND. Early versions of the chips have had problems with
> incorrect ECC generation, and if using these, the default of
> software ECC is preferable.
>
> @@ -171,7 +171,7 @@ config MTD_NAND_NDFC
> NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs
>
> config MTD_NAND_S3C2410_CLKSTOP
> - bool "S3C2410 NAND IDLE clock stop"
> + bool "Samsung S3C NAND IDLE clock stop"
> depends on MTD_NAND_S3C2410
> default n
> help
> diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
> index 01a105e..11dc7e6 100644
> --- a/drivers/mtd/nand/s3c2410.c
> +++ b/drivers/mtd/nand/s3c2410.c
> @@ -1111,6 +1111,9 @@ static struct platform_device_id s3c24xx_driver_ids[] = {
> }, {
> .name = "s3c2412-nand",
> .driver_data = TYPE_S3C2412,
> + }, {
> + .name = "s3c6400-nand",
> + .driver_data = TYPE_S3C2412, /* compatible with 2412 */
> },
> { }
> };
> --
> 1.6.2
>
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
--
Ben (ben@fluff.org, http://www.fluff.org/)
'a smiley only costs 4 bytes'
next prev parent reply other threads:[~2009-06-08 11:11 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-07 13:04 [PATCH] nand/s3c2410: s3c2410_nand_setrate(): use correct macros for 2412/2440 Peter Korsgaard
2009-06-07 13:04 ` [PATCH] mtd/nand: s3c6400 support for s3c2410 driver Peter Korsgaard
2009-06-08 11:11 ` Ben Dooks [this message]
2009-06-08 11:41 ` David Woodhouse
2009-06-08 5:28 ` [PATCH] nand/s3c2410: s3c2410_nand_setrate(): use correct macros for 2412/2440 Artem Bityutskiy
2009-06-08 5:38 ` Peter Korsgaard
2009-06-08 5:47 ` Artem Bityutskiy
2009-06-08 6:32 ` Peter Korsgaard
2009-06-08 6:41 ` Artem Bityutskiy
2009-06-08 7:51 ` David Woodhouse
2009-06-08 7:54 ` Peter Korsgaard
2009-06-08 11:20 ` Ben Dooks
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090608111120.GA31034@fluff.org.uk \
--to=ben-linux@fluff.org \
--cc=David.Woodhouse@intel.com \
--cc=jacmet@sunsite.dk \
--cc=linux-arm-kernel@lists.arm.linux.org.uk \
--cc=linux-mtd@lists.infradead.org \
--cc=wookey@wookware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox