[PATCH 3/3] mx25pdk: add NAND device support

Baruch Siach
2010-01-14T09:24:15Z

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
---
arch/arm/mach-mx25/mx25pdk.c | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c
index 921bc99..c8b1d3b 100644
--- a/arch/arm/mach-mx25/mx25pdk.c
+++ b/arch/arm/mach-mx25/mx25pdk.c
@@ -77,6 +77,12 @@ static void __init mx25pdk_fec_reset(void)
gpio_set_value(FEC_RESET_B_GPIO, 1);
}

+static struct mxc_nand_platform_data mx25pdk_nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+ .flash_bbt = 1,
+};
+
static void __init mx25pdk_init(void)
{
mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
@@ -84,6 +90,7 @@ static void __init mx25pdk_init(void)

mxc_register_device(&mxc_uart_device0, &uart_pdata);
mxc_register_device(&mxc_usbh2, NULL);
+ mxc_register_device(&mxc_nand_device, &mx25pdk_nand_board_info);

mx25pdk_fec_reset();
mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
--
1.6.5