linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Chuanxiao <chuanxiao.dong@gmail.com>
To: David Woodhouse <dwmw2@infradead.org>
Cc: chuanxiao.dong@intel.com, hang.yuan@intel.com,
	linux-mtd@lists.infradead.org, yunpeng.gao@intel.com,
	dedekind1@gmail.com
Subject: Re: [PATCH v1 2/2]nand/denali Update get_nand_para functions
Date: Fri, 6 Aug 2010 01:18:16 +0800	[thread overview]
Message-ID: <20100805171816.GA6320@infernal> (raw)
In-Reply-To: <1281026095.8720.29.camel@localhost>

On Thu, Aug 05, 2010 at 05:34:55PM +0100, David Woodhouse wrote:
>On Fri, 2010-08-06 at 00:28 +0800, Chuanxiao wrote:
>> @@ -1732,24 +1699,18 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
>>                 break;
>>         case NAND_CMD_READID:
>>                 reset_buf(denali);
>> -               if (denali->flash_bank < denali->total_used_banks) {
>> -                       /* write manufacturer information into nand
>> -                          buffer for NAND subsystem to fetch.
>> -                          */
>> -                       write_byte_to_buf(denali,
>> -                                       denali->dev_info.wDeviceMaker);
>> -                       write_byte_to_buf(denali,
>> -                                       denali->dev_info.wDeviceID);
>> -                       write_byte_to_buf(denali,
>> -                                       denali->dev_info.bDeviceParam0);
>> -                       write_byte_to_buf(denali,
>> -                                       denali->dev_info.bDeviceParam1);
>> -                       write_byte_to_buf(denali,
>> -                                       denali->dev_info.bDeviceParam2);
>> -               } else {
>> -                       int i;
>> -                       for (i = 0; i < 5; i++)
>> -                               write_byte_to_buf(denali, 0xff);
>> +               /*sometimes ManufactureId read from register is not right
>> +                * e.g. some of Micron MT29F32G08QAA MLC NAND chips
>> +                * So here we send READID cmd to NAND insteand
>> +                * */
>> +               addr = (uint32_t)MODE_11 | BANK(denali->flash_bank); 
>
>drivers/mtd/nand/denali.c: In function ‘denali_cmdfunc’:
>drivers/mtd/nand/denali.c:1706: error: ‘addr’ undeclared (first use in this function)
>drivers/mtd/nand/denali.c:1706: error: (Each undeclared identifier is reported only once
>drivers/mtd/nand/denali.c:1706: error: for each function it appears in.)
>drivers/mtd/nand/denali.c:1709: error: ‘i’ undeclared (first use in this function)
>drivers/mtd/nand/denali.c:1712: error: ‘id’ undeclared (first use in this function)
>make[3]: *** [drivers/mtd/nand/denali.o] Error 1
>
My mistake. Sorry... New patches were sent out.
David, I will keep on submit patches tomorrow when I come back to
office. In office, I can't use mutt client to access my gmail
account. As far as I know, intel email can send mail out
with no errors. So tomorrow I will try to send patches by intel
email. If the patches send out by intel email has problems, I will
resend patches after I come back home.
Thank you, David.
>-- 
>David Woodhouse                            Open Source Technology Centre
>David.Woodhouse@intel.com                              Intel Corporation
>

      reply	other threads:[~2010-08-05 17:18 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-08-05 16:28 [PATCH v1 2/2]nand/denali Update get_nand_para functions Chuanxiao
2010-08-05 16:34 ` David Woodhouse
2010-08-05 17:18   ` Chuanxiao [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100805171816.GA6320@infernal \
    --to=chuanxiao.dong@gmail.com \
    --cc=chuanxiao.dong@intel.com \
    --cc=dedekind1@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=hang.yuan@intel.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=yunpeng.gao@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).