From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from smtp.nokia.com ([147.243.128.24] helo=mgw-da01.nokia.com) by canuck.infradead.org with esmtps (Exim 4.72 #1 (Red Hat Linux)) id 1PDz7W-0007hU-GP for linux-mtd@lists.infradead.org; Thu, 04 Nov 2010 12:40:47 +0000 Date: Thu, 4 Nov 2010 14:40:16 +0200 From: Roman Tereshonkov To: ext Kyungmin Park Subject: Re: [PATCHv2 0/3] mtd: onenand: add cache program feature for 4kb page onenand Message-ID: <20101104124016.GA13312@nokia.com> References: <1288781721-31771-1-git-send-email-roman.tereshonkov@nokia.com> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: Cc: linux-mtd@lists.infradead.org List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Hi Park, I tried several times fsstress -p 3 -n 10000 -d /mnt/ubifs for 28 MB onenand partition. No warnings observed. The logs are below. # modprobe ubi mtd=4 [ 101.013549] UBI: attaching mtd4 to ubi0 [ 101.017486] UBI: physical eraseblock size: 262144 bytes (256 KiB) [ 101.023895] UBI: logical eraseblock size: 253952 bytes [ 101.029510] UBI: smallest flash I/O unit: 4096 [ 101.034271] UBI: VID header offset: 4096 (aligned 4096) [ 101.040405] UBI: data offset: 8192 [ 101.054565] UBI: empty MTD device detected [ 101.058868] UBI: create volume table (copy #1) [ 101.067504] UBI: create volume table (copy #2) [ 101.077239] UBI: attached mtd4 to ubi0 [ 101.081054] UBI: MTD device name: "swap" [ 101.086090] UBI: MTD device size: 32 MiB [ 101.091033] UBI: number of good PEBs: 123 [ 101.095733] UBI: number of bad PEBs: 5 [ 101.100280] UBI: max. allowed volumes: 128 [ 101.104949] UBI: wear-leveling threshold: 8192 [ 101.109771] UBI: number of internal volumes: 1 [ 101.114257] UBI: number of user volumes: 0 [ 101.118804] UBI: available PEBs: 117 [ 101.123504] UBI: total number of reserved PEBs: 6 [ 101.128295] UBI: number of PEBs reserved for bad PEB handling: 2 [ 101.134399] UBI: max/mean erase counter: 0/0 [ 101.138763] UBI: image sequence number: 0 [ 101.142852] UBI: background thread "ubi_bgt0d" started, PID 104 [ 101.150085] modprobe used greatest stack depth: 6068 bytes left # modprobe ubifs # ubimkvol /dev/ubi0 -N test -m Set volume size to 29712384 Volume ID 0, size 117 LEBs (29712384 bytes, 28.3 MiB), LEB size [ 111.348449] ubimkvol used greatest stack depth: 5820 bytes left 253952 bytes (248.0 KiB), dynamic, name "test", alignment 1 #mount -t ubifs ubi0_0 /mnt/ubifs [ 133.515991] UBIFS: default file-system created [ 133.565490] UBIFS: mounted UBI device 0, volume 0, name "test" [ 133.571594] UBIFS: file system size: 27426816 bytes (26784 KiB, 26 MiB, 108 LEBs) [ 133.579406] UBIFS: journal size: 2031617 bytes (1984 KiB, 1 MiB, 6 LEBs) [ 133.586791] UBIFS: media format: w4/r0 (latest is w4/r0) [ 133.592712] UBIFS: default compressor: lzo [ 133.596893] UBIFS: reserved for root: 1295435 bytes (1265 KiB) [ 133.604675] mount used greatest stack depth: 5768 bytes left # fsstress -p 3 -n 10 -d /mnt/ubifs seed = 397323 # fsstress -p 3 -n 100 -d /mnt/ubifs seed = 826848 # fsstress -p 3 -n 1000 -d /mnt/ubifs seed = 209658 # fsstress -p 3 -n 10000 -d /mnt/ubifs seed = 748381 # mtd_speedtest gives no warnings also. Only bad block related errors: # insmod mtd_speedtest.ko dev=4 [ 23.759948] [ 23.761505] ================================================= [ 23.767639] mtd_speedtest: MTD device: 4 [ 23.771728] mtd_speedtest: MTD device size 33554432, eraseblock size 262144, page size 4096, count of eraseblocks 128, pages per eraseblock 64, OOB size 128 [ 23.800933] mtd_speedtest: scanning for bad eraseblocks [ 23.808441] Bad eraseblock 42 at 0x00a80000 [ 23.812713] mtd_speedtest: block 22 is bad [ 23.818542] Bad eraseblock 60 at 0x00f00000 [ 23.822814] mtd_speedtest: block 40 is bad [ 23.827423] Bad eraseblock 65 at 0x01040000 [ 23.831665] mtd_speedtest: block 45 is bad [ 23.837860] Bad eraseblock 87 at 0x015c0000 [ 23.842163] mtd_speedtest: block 67 is bad [ 23.850891] Bad eraseblock 136 at 0x02200000 [ 23.855224] mtd_speedtest: block 116 is bad [ 23.860534] mtd_speedtest: scanned 128 eraseblocks, 5 are bad [ 24.010498] mtd_speedtest: testing eraseblock write speed [ 26.267669] mtd_speedtest: eraseblock write speed is 13988 KiB/s [ 26.273803] mtd_speedtest: testing eraseblock read speed [ 27.286437] mtd_speedtest: eraseblock read speed is 31269 KiB/s [ 27.430114] mtd_speedtest: testing page write speed [ 36.082855] mtd_speedtest: page write speed is 3641 KiB/s [ 36.088409] mtd_speedtest: testing page read speed [ 37.086517] mtd_speedtest: page read speed is 31678 KiB/s [ 37.444854] mtd_speedtest: testing 2 page write speed [ 60.709533] mtd_speedtest: 2 page write speed is 1353 KiB/s [ 60.715148] mtd_speedtest: testing 2 page read speed [ 61.624176] mtd_speedtest: 2 page read speed is 34870 KiB/s [ 61.629791] mtd_speedtest: Testing erase speed [ 61.868347] mtd_speedtest: erase speed is 133991 KiB/s [ 61.873565] mtd_speedtest: finished [ 61.877105] ================================================= Regards Roman Tereshonkov On Thu, Nov 04, 2010 at 10:10:36AM +0100, ext Kyungmin Park wrote: > On Thu, Nov 4, 2010 at 5:58 PM, wrote: > > > > Hi, > > > > > > I used driver/mtd/tests and did not observe any warnings except a couple of bad blocks for some boards. > Yes in case of mtd_test* there's no messages. > > > > Can you discribe your test case for me to reproduce it. And show your kernel log when it happens if possible? > > Is it for 2kb or 4kb page onenand? > > Mount ubifs on OneNAND which has 4KiB pagesize and run fsstress -p 3 > -n 1000000000 -d /ubifs > > then you can or maybe see the UBI scrubbing message. > > Thank you, > Kyungmin Park > > > > > > Regards > > Roman Tereshonkov > > > > > >>-----Original Message----- > >>From: kyungmin78@gmail.com [mailto:kyungmin78@gmail.com] On > >>Behalf Of ext Kyungmin Park > >>Sent: 04 November, 2010 03:15 > >>To: Tereshonkov Roman (Nokia-MS/Helsinki) > >>Cc: linux-mtd@lists.infradead.org > >>Subject: Re: [PATCHv2 0/3] mtd: onenand: add cache program > >>feature for 4kb page onenand > >> > >>Hi, > >> > >>One concern is that after apply patch, there are some 1-bit ECC > >>warnings so UBI scrubbing messages are displayed. > >> > >>Are there these message at your board? > >> > >>Thank you, > >>Kyungmin Park > >> > >>On Wed, Nov 3, 2010 at 7:55 PM, Roman Tereshonkov > >> wrote: > >>> Implement cache program feature for 4KB page onenand. > >>> This feature improves the write data performance. > >>> The observed 128KB data program speed change is > >>> from 8827KB/s to 14156 KB/s when the feature is enabled. > >>> > >>> Roman Tereshonkov (3): > >>>  mtd: onenand: add option and variable for cache program feature > >>>  mtd: onenand: fix omap2 code to handle cache program feature > >>>  mtd: onenand: implement cache program feature for 4kb page onenand > >>> > >>>  drivers/mtd/onenand/omap2.c        |   12 +++++++++--- > >>>  drivers/mtd/onenand/onenand_base.c |   22 +++++++++++++++++++--- > >>>  include/linux/mtd/onenand.h        |   12 ++++++++++++ > >>>  3 files changed, 40 insertions(+), 6 deletions(-) > >>> > >>> > >>> ______________________________________________________ > >>> Linux MTD discussion mailing list > >>> http://lists.infradead.org/mailman/listinfo/linux-mtd/ > >>> > >> > > ______________________________________________________ > > Linux MTD discussion mailing list > > http://lists.infradead.org/mailman/listinfo/linux-mtd/ > >