public inbox for linux-mtd@lists.infradead.org
 help / color / mirror / Atom feed
From: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
To: Artem Bityutskiy <dedekind1@gmail.com>
Cc: linux-mtd@lists.infradead.org,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Huang Shijie <shijie8@gmail.com>,
	kernel@pengutronix.de
Subject: Re: another issue with ubifs on v3.6-rc2: attaching an formatted device
Date: Tue, 21 Aug 2012 14:13:20 +0200	[thread overview]
Message-ID: <20120821121320.GF12220@pengutronix.de> (raw)
In-Reply-To: <1345544113.2848.87.camel@sauron.fi.intel.com>

Hello,

On Tue, Aug 21, 2012 at 01:15:13PM +0300, Artem Bityutskiy wrote:
> On Tue, 2012-08-21 at 11:35 +0200, Uwe Kleine-König wrote:
> > On Mon, Aug 20, 2012 at 10:11:07PM +0300, Artem Bityutskiy wrote:
> > > On Mon, 2012-08-20 at 18:07 +0200, Uwe Kleine-König wrote:
> > > > [  163.714143] uncorrectable error : 
> > > > [  163.727597] UBI warning: ubi_io_read: error -74 (ECC error) while
> > > > reading 64 bytes from PEB 0:0, read only 64 bytes, retry
> > > > [  163.740737] uncorrectable error : 
> > > > [  163.744032] UBI warning: ubi_io_read: error -74 (ECC error) while
> > > > reading 64 bytes from PEB 0:0, read only 64 bytes, retry
> > > > [  163.757119] uncorrectable error : 
> > > > [  163.760487] UBI warning: ubi_io_read: error -74 (ECC error) while
> > > > reading 64 bytes from PEB 0:0, read only 64 bytes, retry
> > > > [  163.774427] uncorrectable error : 
> > > > [  163.777808] UBI error: ubi_io_read: error -74 (ECC error) while
> > > > reading 64 bytes from PEB 0:0, read 64 bytes 
> > > 
> > > This looks like your flash does not really support sub-pages while
> > > declares that it does. Check it with MTD subpage test.
> > the subpages test fails with:
> > 
> > [   82.435792] mtd_subpagetest: written up to eraseblock 7424
> > [   82.905775] mtd_subpagetest: written up to eraseblock 7680
> > [   83.375201] mtd_subpagetest: written up to eraseblock 7936
> > [   83.840447] mtd_subpagetest: written 8192 eraseblocks
> > [   83.845522] mtd_subpagetest: verifying all eraseblocks
> > [   83.852740] uncorrectable error : 
> > [   83.856086] mtd_subpagetest: error: read failed at 0x0
> > [   83.861469] mtd_subpagetest: error -74 occurred
> > [   83.866093] =================================================
> > Error: could not insert module ./drivers/mtd/tests/mtd_subpagetest.ko: Bad message
> > 
> > I don't have a clue yet how to debug that further. Will start with
> > checking older kernel releases. Any hints welcome.
> 
> AFAIR, the driver did not support subpages and just needed to report
> about this. And there is a bug in MTD which makes it impossible for
> drivers to tell that sub-pages are not supported. So AFAIU, we need the
> patch I pointed you, and we also need the driver to use "no subpage
> writes" option.
I enabled hwecc and then both mtd_subpagetest and ubi-mounting worked
again. Maybe it would make sense to drop swecc?

Many thanks to Artem who helped debugging that on irc.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

  parent reply	other threads:[~2012-08-21 12:14 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-08-20 16:07 another issue with ubifs on v3.6-rc2: attaching an formatted device Uwe Kleine-König
2012-08-20 19:11 ` Artem Bityutskiy
2012-08-20 19:14   ` Artem Bityutskiy
2012-08-21  9:35   ` Uwe Kleine-König
2012-08-21 10:15     ` Artem Bityutskiy
2012-08-21 10:16       ` Marc Kleine-Budde
2012-08-21 12:13       ` Uwe Kleine-König [this message]
2012-08-21 10:24     ` Huang Shijie
2012-08-21 10:31       ` Artem Bityutskiy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120821121320.GF12220@pengutronix.de \
    --to=u.kleine-koenig@pengutronix.de \
    --cc=dedekind1@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-mtd@lists.infradead.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shijie8@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox