From: Shmulik Ladkani <shmulik.ladkani@gmail.com>
To: Artem Bityutskiy <dedekind1@gmail.com>
Cc: linux-mtd@lists.infradead.org,
Brian Norris <computersforpeace@gmail.com>,
David Woodhouse <dwmw2@infradead.org>,
Shmulik Ladkani <shmulik.ladkani@gmail.com>
Subject: Re: [PATCH] mtd: nand: Rename create_bbt()'s 'len' variable to 'numpages'
Date: Sat, 22 Sep 2012 21:54:47 +0300 [thread overview]
Message-ID: <20120922215447.331f6480@halley> (raw)
In-Reply-To: <20120820162915.7f93e6c4@pixies.home.jungo.com>
Ping.
On Mon, 20 Aug 2012 16:29:15 +0300 Shmulik Ladkani <shmulik.ladkani@gmail.com> wrote:
> Rename 'len' variable of create_bbt/scan_block_fast/scan_block_full to
> 'numpages', since it really means number of pages to scan when
> searching for the BBM (and not the byte length of the scan).
>
> Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
> ---
> diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
> index 9a5402e..24b0a4c 100644
> --- a/drivers/mtd/nand/nand_bbt.c
> +++ b/drivers/mtd/nand/nand_bbt.c
> @@ -401,7 +401,7 @@ static void read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
> /* Scan a given block full */
> static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd,
> loff_t offs, uint8_t *buf, size_t readlen,
> - int scanlen, int len)
> + int scanlen, int numpages)
> {
> int ret, j;
>
> @@ -410,7 +410,7 @@ static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd,
> if (ret && !mtd_is_bitflip_or_eccerr(ret))
> return ret;
>
> - for (j = 0; j < len; j++, buf += scanlen) {
> + for (j = 0; j < numpages; j++, buf += scanlen) {
> if (check_pattern(buf, scanlen, mtd->writesize, bd))
> return 1;
> }
> @@ -419,7 +419,7 @@ static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd,
>
> /* Scan a given block partially */
> static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd,
> - loff_t offs, uint8_t *buf, int len)
> + loff_t offs, uint8_t *buf, int numpages)
> {
> struct mtd_oob_ops ops;
> int j, ret;
> @@ -430,7 +430,7 @@ static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd,
> ops.datbuf = NULL;
> ops.mode = MTD_OPS_PLACE_OOB;
>
> - for (j = 0; j < len; j++) {
> + for (j = 0; j < numpages; j++) {
> /*
> * Read the full oob until read_oob is fixed to handle single
> * byte reads for 16 bit buswidth.
> @@ -463,7 +463,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
> struct nand_bbt_descr *bd, int chip)
> {
> struct nand_chip *this = mtd->priv;
> - int i, numblocks, len, scanlen;
> + int i, numblocks, numpages, scanlen;
> int startblock;
> loff_t from;
> size_t readlen;
> @@ -471,11 +471,11 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
> pr_info("Scanning device for bad blocks\n");
>
> if (bd->options & NAND_BBT_SCANALLPAGES)
> - len = 1 << (this->bbt_erase_shift - this->page_shift);
> + numpages = 1 << (this->bbt_erase_shift - this->page_shift);
> else if (bd->options & NAND_BBT_SCAN2NDPAGE)
> - len = 2;
> + numpages = 2;
> else
> - len = 1;
> + numpages = 1;
>
> if (!(bd->options & NAND_BBT_SCANEMPTY)) {
> /* We need only read few bytes from the OOB area */
> @@ -484,7 +484,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
> } else {
> /* Full page content should be read */
> scanlen = mtd->writesize + mtd->oobsize;
> - readlen = len * mtd->writesize;
> + readlen = numpages * mtd->writesize;
> }
>
> if (chip == -1) {
> @@ -508,7 +508,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
> }
>
> if (this->bbt_options & NAND_BBT_SCANLASTPAGE)
> - from += mtd->erasesize - (mtd->writesize * len);
> + from += mtd->erasesize - (mtd->writesize * numpages);
>
> for (i = startblock; i < numblocks;) {
> int ret;
> @@ -517,9 +517,9 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
>
> if (bd->options & NAND_BBT_SCANALLPAGES)
> ret = scan_block_full(mtd, bd, from, buf, readlen,
> - scanlen, len);
> + scanlen, numpages);
> else
> - ret = scan_block_fast(mtd, bd, from, buf, len);
> + ret = scan_block_fast(mtd, bd, from, buf, numpages);
>
> if (ret < 0)
> return ret;
next prev parent reply other threads:[~2012-09-22 18:55 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-20 13:29 [PATCH] mtd: nand: Rename create_bbt()'s 'len' variable to 'numpages' Shmulik Ladkani
2012-08-25 0:18 ` Brian Norris
2012-08-25 8:32 ` Shmulik Ladkani
2012-09-22 18:54 ` Shmulik Ladkani [this message]
2012-09-23 12:02 ` Artem Bityutskiy
2012-09-23 14:38 ` Shmulik Ladkani
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120922215447.331f6480@halley \
--to=shmulik.ladkani@gmail.com \
--cc=computersforpeace@gmail.com \
--cc=dedekind1@gmail.com \
--cc=dwmw2@infradead.org \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).