From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1UAzpD-0004W8-Nq for linux-mtd@lists.infradead.org; Thu, 28 Feb 2013 09:30:52 +0000 Date: Thu, 28 Feb 2013 10:30:47 +0100 From: Uwe =?iso-8859-1?Q?Kleine-K=F6nig?= To: Huang Shijie Subject: Re: [PATCH] mtd/nand: don't use {read,write}_buf for 8-bit transfers Message-ID: <20130228093047.GE22886@pengutronix.de> References: <1361977852-18233-1-git-send-email-u.kleine-koenig@pengutronix.de> <512EC54F.3090400@freescale.com> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <512EC54F.3090400@freescale.com> Cc: Artem Bityutskiy , linux-mtd@lists.infradead.org, David Woodhouse List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Hello, On Thu, Feb 28, 2013 at 10:47:43AM +0800, Huang Shijie wrote: > 于 2013年02月27日 23:10, Uwe Kleine-König 写道: > >According to the Open NAND Flash Interface Specification (ONFI) Revision > >3.1 "Parameters are always transferred on the lower 8-bits of the data > >bus." for the Get Features and Set Features commands. > > > yes. the set/get features should works in 8-bit. > > I have never met a 16-bit onfi nand yet. :) > > >So using read_buf and write_buf is wrong for 16-bit wide nand chips as > >they use I/O[15:0]. The Get Features command is easily fixed using 4 > >times the read_byte callback. For Set Features error out as there is no > yes. for get features, it's easy to fix it. > >write_byte callback. > Most of the time, the nand controller will overwrite the write_buf hook... > I also think we need a write_byte callback. Is this an Ack for my patch? Best regards Uwe -- Pengutronix e.K. | Uwe Kleine-König | Industrial Linux Solutions | http://www.pengutronix.de/ |