[PATCH v4 0/3] suspend/resume support for OMAP nand driver

[PATCH v4 0/3] suspend/resume support for OMAP nand driver

[Pekon Gupta]

This patch series adds low power transition support for OMAP NAND driver.
[Patch 1/3]: Adds pm_runtime calls to handle GPMC module probe and remove
[Patch 2/3]: Adds GPMC suspend/resume support.
[Patch 3/3]: Adds ELM suspend/resume support.

Tested on am335x-evm with NAND flash support, using following:
	echo devices 	> /sys/power/pm_test
	echo mem	> /sys/power/state

	echo core	> /sys/power/pm_test
	echo mem	> /sys/power/state

Changes Since v3:
- CONFIG_PM -> CONFIG_PM_SLEEP
- using struct dev_pm_ops via driver->pm, instead of struct platform_driver
- rebased to 3.10-rc5

Changes Since v2:
- Remove calll back of nand_suspend from omap2 nand driver, as the same call
  already done from suspend activity mtd class driver.

[1] http://comments.gmane.org/gmane.linux.ports.arm.omap/91405


avinash philip (3):
  arm: gpmc: Converts GPMC driver to pm_runtime capable
  arm: gpmc: Low power transition support
  mtd: devices: elm: Low power transition support

 arch/arm/mach-omap2/gpmc.c | 27 +++++++++++++++++++++++++--
 drivers/mtd/devices/elm.c  | 19 +++++++++++++++++++
 2 files changed, 44 insertions(+), 2 deletions(-)

-- 
1.8.1

[PATCH v4 1/3] arm: gpmc: Converts GPMC driver to pm_runtime capable

[Pekon Gupta]

From: avinash philip <avinashphilip@ti.com>

Support for pm_runtime add to GPMC driver.

Signed-off-by: Philip Avinash <avinashphilip@ti.com>
Signed-off-by: Pekon Gupta <pekon@ti.com> 
---
 arch/arm/mach-omap2/gpmc.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index fb6f241..1380cee 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -30,6 +30,7 @@
 #include <linux/of_mtd.h>
 #include <linux/of_device.h>
 #include <linux/mtd/nand.h>
+#include <linux/pm_runtime.h>
 
 #include <linux/platform_data/mtd-nand-omap2.h>
 
@@ -1594,7 +1595,8 @@ static int gpmc_probe(struct platform_device *pdev)
 		return PTR_ERR(gpmc_l3_clk);
 	}
 
-	clk_prepare_enable(gpmc_l3_clk);
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
 
 	gpmc_dev = &pdev->dev;
 
@@ -1634,7 +1636,7 @@ static int gpmc_probe(struct platform_device *pdev)
 
 	rc = gpmc_probe_dt(pdev);
 	if (rc < 0) {
-		clk_disable_unprepare(gpmc_l3_clk);
+		pm_runtime_put_sync(&pdev->dev);
 		clk_put(gpmc_l3_clk);
 		dev_err(gpmc_dev, "failed to probe DT parameters\n");
 		return rc;
@@ -1647,6 +1649,8 @@ static int gpmc_remove(struct platform_device *pdev)
 {
 	gpmc_free_irq();
 	gpmc_mem_exit();
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
 	gpmc_dev = NULL;
 	return 0;
 }
-- 
1.8.1

[PATCH v4 2/3] arm: gpmc: Low power transition support

[Pekon Gupta]

From: avinash philip <avinashphilip@ti.com>

With GPMC converted to platform driver recently, adds low power
transition support in driver itself.

Signed-off-by: Philip Avinash <avinashphilip@ti.com>
Signed-off-by: Pekon Gupta <pekon@ti.com>
---
 arch/arm/mach-omap2/gpmc.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 1380cee..b5c4752 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -1655,6 +1655,24 @@ static int gpmc_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int gpmc_suspend(struct device *dev)
+{
+	omap3_gpmc_save_context();
+	pm_runtime_put_sync(dev);
+	return 0;
+}
+
+static int gpmc_resume(struct device *dev)
+{
+	pm_runtime_get_sync(dev);
+	omap3_gpmc_restore_context();
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(gpmc_pm_ops, gpmc_suspend, gpmc_resume);
+
 static struct platform_driver gpmc_driver = {
 	.probe		= gpmc_probe,
 	.remove		= gpmc_remove,
@@ -1662,6 +1680,7 @@ static struct platform_driver gpmc_driver = {
 		.name	= DEVICE_NAME,
 		.owner	= THIS_MODULE,
 		.of_match_table = of_match_ptr(gpmc_dt_ids),
+		.pm	= &gpmc_pm_ops,
 	},
 };
 
-- 
1.8.1

Re: [PATCH v4 2/3] arm: gpmc: Low power transition support

[Tony Lindgren]

* Pekon Gupta <pekon@ti.com> [130612 04:07]:
> From: avinash philip <avinashphilip@ti.com>
> 
> With GPMC converted to platform driver recently, adds low power
> transition support in driver itself.

Applying the first two patches of this series into omap-for-v3.11/gpmc.
Not taking the MTD patch, if it has dependencies to the first two
patches please let me know and also get an ack from Artem if you
want me to take it.

Regards,

Tony

Re: [PATCH v4 2/3] arm: gpmc: Low power transition support

[Tony Lindgren]

* Tony Lindgren <tony@atomide.com> [130612 10:08]:
> * Pekon Gupta <pekon@ti.com> [130612 04:07]:
> > From: avinash philip <avinashphilip@ti.com>
> > 
> > With GPMC converted to platform driver recently, adds low power
> > transition support in driver itself.
> 
> Applying the first two patches of this series into omap-for-v3.11/gpmc.
> Not taking the MTD patch, if it has dependencies to the first two
> patches please let me know and also get an ack from Artem if you
> want me to take it.

Oops, dropping the second patch in this series as it causes the
following if only omap4 is selected for example:

arch/arm/mach-omap2/built-in.o: In function `gpmc_resume':
dss-common.c:(.text+0x9a8): undefined reference to `omap3_gpmc_restore_context'
arch/arm/mach-omap2/built-in.o: In function `gpmc_suspend':
dss-common.c:(.text+0x9c8): undefined reference to `omap3_gpmc_save_context'

Can you please take a lok and fix that?

Regards,

Tony

[PATCH v4 3/3] mtd: devices: elm: Low power transition support

[Pekon Gupta]

From: avinash philip <avinashphilip@ti.com>

In low power modes of AM335X platforms, peripherals power is cut off.
This patch supports low power sleep transition support for ELM driver.

Signed-off-by: Philip Avinash <avinashphilip@ti.com>
Signed-off-by: Pekon Gupta <pekon@ti.com>
---
 drivers/mtd/devices/elm.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/mtd/devices/elm.c b/drivers/mtd/devices/elm.c
index dccef9f..171efcd 100644
--- a/drivers/mtd/devices/elm.c
+++ b/drivers/mtd/devices/elm.c
@@ -20,6 +20,7 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/sched.h>
 #include <linux/pm_runtime.h>
 #include <linux/platform_data/elm.h>
 
@@ -385,6 +386,23 @@ static int elm_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static int elm_suspend(struct device *dev)
+{
+	pm_runtime_put_sync(dev);
+	return 0;
+}
+
+static int elm_resume(struct device *dev)
+{
+	struct elm_info *info = dev_get_drvdata(dev);
+
+	pm_runtime_get_sync(dev);
+	elm_config(dev, info->bch_type);
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(elm_pm_ops, elm_suspend, elm_resume);
+
 #ifdef CONFIG_OF
 static const struct of_device_id elm_of_match[] = {
 	{ .compatible = "ti,am3352-elm" },
@@ -398,6 +416,7 @@ static struct platform_driver elm_driver = {
 		.name	= "elm",
 		.owner	= THIS_MODULE,
 		.of_match_table = of_match_ptr(elm_of_match),
+		.pm	= &elm_pm_ops,
 	},
 	.probe	= elm_probe,
 	.remove	= elm_remove,
-- 
1.8.1

[PATCH v4 1/3] arm: gpmc: Converts GPMC driver to pm_runtime capable

[Pekon Gupta]

From: avinash philip <avinashphilip@ti.com>

Support for pm_runtime add to GPMC driver.

Signed-off-by: Philip Avinash <avinashphilip@ti.com>
Signed-off-by: Pekon Gupta <pekon@ti.com> 
---
 arch/arm/mach-omap2/gpmc.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index fb6f241..1380cee 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -30,6 +30,7 @@
 #include <linux/of_mtd.h>
 #include <linux/of_device.h>
 #include <linux/mtd/nand.h>
+#include <linux/pm_runtime.h>
 
 #include <linux/platform_data/mtd-nand-omap2.h>
 
@@ -1594,7 +1595,8 @@ static int gpmc_probe(struct platform_device *pdev)
 		return PTR_ERR(gpmc_l3_clk);
 	}
 
-	clk_prepare_enable(gpmc_l3_clk);
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
 
 	gpmc_dev = &pdev->dev;
 
@@ -1634,7 +1636,7 @@ static int gpmc_probe(struct platform_device *pdev)
 
 	rc = gpmc_probe_dt(pdev);
 	if (rc < 0) {
-		clk_disable_unprepare(gpmc_l3_clk);
+		pm_runtime_put_sync(&pdev->dev);
 		clk_put(gpmc_l3_clk);
 		dev_err(gpmc_dev, "failed to probe DT parameters\n");
 		return rc;
@@ -1647,6 +1649,8 @@ static int gpmc_remove(struct platform_device *pdev)
 {
 	gpmc_free_irq();
 	gpmc_mem_exit();
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
 	gpmc_dev = NULL;
 	return 0;
 }
-- 
1.8.1

[PATCH v4 2/3] arm: gpmc: Low power transition support

[Pekon Gupta]

From: avinash philip <avinashphilip@ti.com>

With GPMC converted to platform driver recently, adds low power
transition support in driver itself.

Signed-off-by: Philip Avinash <avinashphilip@ti.com>
Signed-off-by: Pekon Gupta <pekon@ti.com>
---
 arch/arm/mach-omap2/gpmc.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 1380cee..b5c4752 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -1655,6 +1655,24 @@ static int gpmc_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int gpmc_suspend(struct device *dev)
+{
+	omap3_gpmc_save_context();
+	pm_runtime_put_sync(dev);
+	return 0;
+}
+
+static int gpmc_resume(struct device *dev)
+{
+	pm_runtime_get_sync(dev);
+	omap3_gpmc_restore_context();
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(gpmc_pm_ops, gpmc_suspend, gpmc_resume);
+
 static struct platform_driver gpmc_driver = {
 	.probe		= gpmc_probe,
 	.remove		= gpmc_remove,
@@ -1662,6 +1680,7 @@ static struct platform_driver gpmc_driver = {
 		.name	= DEVICE_NAME,
 		.owner	= THIS_MODULE,
 		.of_match_table = of_match_ptr(gpmc_dt_ids),
+		.pm	= &gpmc_pm_ops,
 	},
 };
 
-- 
1.8.1