From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Sun, 7 Sep 2014 09:38:51 +0200 From: Thomas Petazzoni To: Arnaud Ebalard Subject: Re: [PATCH 1/2] ARM: mvebu: Netgear RN104: Use Hardware BCH ECC Message-ID: <20140907093851.377ddd29@free-electrons.com> In-Reply-To: <920c7e7169dc6aaaa3eb4bced2336d38e77b8864.1410035142.git.arno@natisbad.org> References: <920c7e7169dc6aaaa3eb4bced2336d38e77b8864.1410035142.git.arno@natisbad.org> MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: devicetree@vger.kernel.org, Ben Peddell , Jason Cooper , linux-mtd@lists.infradead.org, Ezequiel Garcia , Gregory Clement , Russell King , Brian Norris , linux-arm-kernel@lists.infradead.org List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Dear Arnaud Ebalard, On Sat, 06 Sep 2014 22:49:25 +0200, Arnaud Ebalard wrote: > Fixes: 0373a558bd79 ("ARM: mvebu: Enable NAND controller in ReadyNAS 104 .dts file") > Depends-on: 5b3e507820c6 ("mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding") Maybe it's worth noting that it's not a build dependency: your commit changing the Device Tree files can perfectly be applied without the NAND ECC strength and step size bindings. Of course, it will have no effect on an older kernel that doesn't support those bindings, but it will not cause a build failure. Thanks! Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com