From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Tue, 30 Sep 2014 10:07:20 +0200 From: Boris Brezillon To: Boris BREZILLON Subject: Re: [PATCH v3 0/3] mtd: nand: gpmi: add proper raw access support Message-ID: <20140930100720.45625804@bbrezillon> In-Reply-To: <1411481256-29141-1-git-send-email-boris.brezillon@free-electrons.com> References: <1411481256-29141-1-git-send-email-boris.brezillon@free-electrons.com> MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: Huang Shijie , linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org, Roy Lee , Mike Voytovich , Brian Norris , David Woodhouse , linux-arm-kernel@lists.infradead.org List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Hi, On Tue, 23 Sep 2014 16:07:33 +0200 Boris BREZILLON wrote: > Hello Huang, Brian, > > This is just a new proposal to support raw accesses in a more standard way > in the GPMI driver. > This series has been tested on an imx28 board. > > Any suggestions are welcome. Brian, any chance you could take a look at this series and give your opinion and/or suggest a new approach ? Huang, did you have time to think about a better way to implement these raw access functions ? Best Regards, Boris -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com