Re: [PATCH v3 3/3] mtd: nand: add Toshiba TC58NVG0S3E to nand_ids table

[Boris Brezillon <boris.brezillon@free-electrons.com>]

On Wed, 31 Dec 2014 13:58:53 +0100
Oleksij Rempel <linux@rempel-privat.de> wrote:

> Add the full description of the Toshiba TC58NVG0S3E NAND chip in the
> nand_ids table so that we can later use the NAND ECC infos and ONFI timings
> mode in controller drivers.
> 
> Tested with asm9260_nand driver.
> 
> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>

Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>

> ---
>  drivers/mtd/nand/nand_ids.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
> index fbde8910..47b5cdf 100644
> --- a/drivers/mtd/nand/nand_ids.c
> +++ b/drivers/mtd/nand/nand_ids.c
> @@ -31,6 +31,10 @@ struct nand_flash_dev nand_flash_ids[] = {
>  	 * listed by full ID. We list them first so that we can easily identify
>  	 * the most specific match.
>  	 */
> +	{"TC58NVG0S3E 1G 3.3V 8-bit",
> +		{ .id = {0x98, 0xd1, 0x90, 0x15, 0x76, 0x14, 0x01, 0x00} },
> +		  SZ_2K, SZ_128, SZ_128K, 0, 8, 64, NAND_ECC_INFO(1, SZ_512),
> +		  2 },
>  	{"TC58NVG2S0F 4G 3.3V 8-bit",
>  		{ .id = {0x98, 0xdc, 0x90, 0x26, 0x76, 0x15, 0x01, 0x08} },
>  		  SZ_4K, SZ_512, SZ_256K, 0, 8, 224, NAND_ECC_INFO(4, SZ_512) },



-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com