From: Brian Norris <computersforpeace@gmail.com>
To: Han Xu <b45815@freescale.com>
Cc: shijie.huang@intel.com, linux-mtd@lists.infradead.org,
han.xu@freescale.com
Subject: Re: [PATCH V3] mtd: fsl-quadspi: Access multiple chips simultaneously
Date: Wed, 20 May 2015 14:52:50 -0700 [thread overview]
Message-ID: <20150520215250.GP11598@ld-irv-0074> (raw)
In-Reply-To: <1431546057-16596-1-git-send-email-b45815@freescale.com>
Hi Han,
On Wed, May 13, 2015 at 02:40:57PM -0500, Han Xu wrote:
> Add supports for simultaneous access to multiple chips. Need to lock
> the mutex before any quad spi operations and unlock the mutex after
> operations complete.
>
> Signed-off-by: Han Xu <b45815@freescale.com>
> ---
> v2 -- > v3
> 1. Unlock the mutex if errors occur.
> 2. Destroy the mutex when module remove or probe fail.
>
> v1 -- > v2
> 1. Rebase to latest l2-mtd code and resend.
> ---
>
>
> drivers/mtd/spi-nor/fsl-quadspi.c | 22 +++++++++++++++++-----
> 1 file changed, 17 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
> index 52a872f..e6fc064 100644
> --- a/drivers/mtd/spi-nor/fsl-quadspi.c
> +++ b/drivers/mtd/spi-nor/fsl-quadspi.c
...
> @@ -761,13 +763,17 @@ static int fsl_qspi_prep(struct spi_nor *nor, enum spi_nor_ops ops)
> struct fsl_qspi *q = nor->priv;
> int ret;
>
> + mutex_lock(&q->lock);
> ret = clk_enable(q->clk_en);
> - if (ret)
> + if (ret) {
> + mutex_unlock(&q->lock);
> return ret;
> + }
>
> ret = clk_enable(q->clk);
> if (ret) {
> clk_disable(q->clk_en);
> + mutex_unlock(&q->lock);
> return ret;
> }
>
I think it'd be better to have a single error path in this function now.
Otherwise, I think this is OK. I can push the appended patch instead, if
that's OK with you.
Signed-off-by: Han Xu <b45815@freescale.com>
[Brian: reworked err path in fsl_qspi_prep()]
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
drivers/mtd/spi-nor/fsl-quadspi.c | 32 +++++++++++++++++++++++---------
1 file changed, 23 insertions(+), 9 deletions(-)
diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index 52a872fa1b6e..4fe13dd535f8 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -26,6 +26,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/spi-nor.h>
+#include <linux/mutex.h>
/* The registers */
#define QUADSPI_MCR 0x00
@@ -233,6 +234,7 @@ struct fsl_qspi {
u32 clk_rate;
unsigned int chip_base_addr; /* We may support two chips. */
bool has_second_chip;
+ struct mutex lock;
};
static inline int is_vybrid_qspi(struct fsl_qspi *q)
@@ -761,18 +763,24 @@ static int fsl_qspi_prep(struct spi_nor *nor, enum spi_nor_ops ops)
struct fsl_qspi *q = nor->priv;
int ret;
+ mutex_lock(&q->lock);
ret = clk_enable(q->clk_en);
if (ret)
- return ret;
+ goto err_mutex;
ret = clk_enable(q->clk);
- if (ret) {
- clk_disable(q->clk_en);
- return ret;
- }
+ if (ret)
+ goto err_clk;
fsl_qspi_set_base_addr(q, nor);
return 0;
+
+err_clk:
+ clk_disable(q->clk_en);
+err_mutex:
+ mutex_unlock(&q->lock);
+
+ return ret;
}
static void fsl_qspi_unprep(struct spi_nor *nor, enum spi_nor_ops ops)
@@ -781,6 +789,7 @@ static void fsl_qspi_unprep(struct spi_nor *nor, enum spi_nor_ops ops)
clk_disable(q->clk);
clk_disable(q->clk_en);
+ mutex_unlock(&q->lock);
}
static int fsl_qspi_probe(struct platform_device *pdev)
@@ -864,6 +873,8 @@ static int fsl_qspi_probe(struct platform_device *pdev)
if (of_get_property(np, "fsl,qspi-has-second-chip", NULL))
q->has_second_chip = true;
+ mutex_init(&q->lock);
+
/* iterate the subnodes. */
for_each_available_child_of_node(dev->of_node, np) {
char modalias[40];
@@ -892,24 +903,24 @@ static int fsl_qspi_probe(struct platform_device *pdev)
ret = of_modalias_node(np, modalias, sizeof(modalias));
if (ret < 0)
- goto irq_failed;
+ goto mutex_failed;
ret = of_property_read_u32(np, "spi-max-frequency",
&q->clk_rate);
if (ret < 0)
- goto irq_failed;
+ goto mutex_failed;
/* set the chip address for READID */
fsl_qspi_set_base_addr(q, nor);
ret = spi_nor_scan(nor, modalias, SPI_NOR_QUAD);
if (ret)
- goto irq_failed;
+ goto mutex_failed;
ppdata.of_node = np;
ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
if (ret)
- goto irq_failed;
+ goto mutex_failed;
/* Set the correct NOR size now. */
if (q->nor_size == 0) {
@@ -950,6 +961,8 @@ last_init_failed:
i *= 2;
mtd_device_unregister(&q->mtd[i]);
}
+mutex_failed:
+ mutex_destroy(&q->lock);
irq_failed:
clk_disable_unprepare(q->clk);
clk_failed:
@@ -973,6 +986,7 @@ static int fsl_qspi_remove(struct platform_device *pdev)
writel(QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR);
writel(0x0, q->iobase + QUADSPI_RSER);
+ mutex_destroy(&q->lock);
clk_unprepare(q->clk);
clk_unprepare(q->clk_en);
return 0;
--
1.9.1
next prev parent reply other threads:[~2015-05-20 21:53 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-13 19:40 [PATCH V3] mtd: fsl-quadspi: Access multiple chips simultaneously Han Xu
2015-05-20 21:52 ` Brian Norris [this message]
2015-05-20 22:28 ` Han Xu
2015-05-27 19:34 ` Brian Norris
2015-06-23 23:10 ` Brian Norris
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150520215250.GP11598@ld-irv-0074 \
--to=computersforpeace@gmail.com \
--cc=b45815@freescale.com \
--cc=han.xu@freescale.com \
--cc=linux-mtd@lists.infradead.org \
--cc=shijie.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox