From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from smtp.codeaurora.org ([198.145.29.96]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1ZMMot-00010x-4f for linux-mtd@lists.infradead.org; Mon, 03 Aug 2015 20:58:51 +0000 Date: Mon, 3 Aug 2015 13:58:29 -0700 From: Stephen Boyd To: Archit Taneja Cc: linux-mtd@lists.infradead.org, dehrenberg@google.com, cernekee@gmail.com, computersforpeace@gmail.com, linux-arm-msm@vger.kernel.org, agross@codeaurora.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org Subject: Re: [PATCH v3 5/5] arm: qcom: dts: Enable NAND node on IPQ8064 AP148 platform Message-ID: <20150803205829.GA21068@codeaurora.org> References: <1421419702-17812-1-git-send-email-architt@codeaurora.org> <1438578498-32254-1-git-send-email-architt@codeaurora.org> <1438578498-32254-6-git-send-email-architt@codeaurora.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1438578498-32254-6-git-send-email-architt@codeaurora.org> List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On 08/03, Archit Taneja wrote: > @@ -93,5 +115,19 @@ > sata@29000000 { > status = "ok"; > }; > + > + nand@1ac00000 { > + status = "ok"; > + > + pinctrl-0 = <&nand_pins>; > + pinctrl-names = "default"; > + > + nand-ecc-strength = <4>; > + nand-bus-width = <8>; > + }; > }; > }; > + > +&adm_dma { > + status = "ok"; > +}; I think the preference is to put the full path to the device in the dts file and then have status = "ok". So please move this into the soc node and give the correct offset, etc. like we've done for other nodes. -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project