[PATCH v11 0/3] mtd: nand: jz4780: Add NAND and BCH drivers

[PATCH v11 0/3] mtd: nand: jz4780: Add NAND and BCH drivers

[Harvey Hunt]

Hi,

This series adds support for the BCH controller and NAND devices on
the Ingenic JZ4780 SoC.

Tested on the MIPS Creator Ci20 board. All dependencies are now in
mainline.

This version of the series is based on l2-mtd/master.

As suggested by Boris [0], refactoring work has been done to treat NAND
chips as children nodes of the NAND controller.

Review and feedback welcome.

Thanks,

Harvey

Cc: devicetree@vger.kernel.org

Alex Smith (3):
  dt-bindings: binding for jz4780-{nand,bch}
  mtd: nand: jz4780: driver for NAND devices on JZ4780 SoCs
  MIPS: dts: jz4780/ci20: Add NEMC, BCH and NAND device tree nodes

 .../bindings/mtd/ingenic,jz4780-nand.txt           |  86 +++++
 arch/mips/boot/dts/ingenic/ci20.dts                |  63 +++
 arch/mips/boot/dts/ingenic/jz4780.dtsi             |  26 ++
 drivers/mtd/nand/Kconfig                           |   7 +
 drivers/mtd/nand/Makefile                          |   1 +
 drivers/mtd/nand/jz4780_bch.c                      | 380 ++++++++++++++++++
 drivers/mtd/nand/jz4780_bch.h                      |  43 +++
 drivers/mtd/nand/jz4780_nand.c                     | 424 +++++++++++++++++++++
 8 files changed, 1030 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt
 create mode 100644 drivers/mtd/nand/jz4780_bch.c
 create mode 100644 drivers/mtd/nand/jz4780_bch.h
 create mode 100644 drivers/mtd/nand/jz4780_nand.c

-- 
2.6.4

[PATCH v11 1/3] dt-bindings: binding for jz4780-{nand,bch}

[Harvey Hunt]

From: Alex Smith <alex.smith@imgtec.com>

Add DT bindings for NAND devices connected to the NEMC on JZ4780 SoCs,
as well as the hardware BCH controller, used by the jz4780_{nand,bch}
drivers.

Signed-off-by: Alex Smith <alex.smith@imgtec.com>
Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: linux-mtd@lists.infradead.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: robh@kernel.org
Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
v10 -> v11:
 - Added Boris Brezillon's Reviewed-By.

v9 -> v10:
 - Added Rob Herring's Acked-by.

v8 -> v9:
 - Document that partitions are represented as a child node of a NAND chip.

v7 -> v8:
 - Describe how NAND chips are now child nodes of the NAND controller.

v6 -> v7:
 - Add nand-ecc-mode to DT bindings.
 - Add nand-on-flash-bbt to DT bindings.

v5 -> v6:
 - No change.

v4 -> v5:
 - Rename ingenic,bch-device to ingenic,bch-controller to fit with
   existing convention.

v3 -> v4:
 - No change

v2 -> v3:
 - Rebase to 4.0-rc6
 - Changed ingenic,ecc-size to common nand-ecc-step-size
 - Changed ingenic,ecc-strength to common nand-ecc-strength
 - Changed ingenic,busy-gpio to common rb-gpios
 - Changed ingenic,wp-gpio to common wp-gpios

v1 -> v2:
 - Rebase to 4.0-rc3

 .../bindings/mtd/ingenic,jz4780-nand.txt           | 86 ++++++++++++++++++++++
 1 file changed, 86 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt

diff --git a/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt b/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt
new file mode 100644
index 0000000..29ea585
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt
@@ -0,0 +1,86 @@
+* Ingenic JZ4780 NAND/BCH
+
+This file documents the device tree bindings for NAND flash devices on the
+JZ4780. NAND devices are connected to the NEMC controller (described in
+memory-controllers/ingenic,jz4780-nemc.txt), and thus NAND device nodes must
+be children of the NEMC node.
+
+Required NAND controller device properties:
+- compatible: Should be set to "ingenic,jz4780-nand".
+- reg: For each bank with a NAND chip attached, should specify a bank number,
+  an offset of 0 and a size of 0x1000000 (i.e. the whole NEMC bank).
+
+Optional NAND controller device properties:
+- ingenic,bch-controller: To make use of the hardware BCH controller, this
+  property must contain a phandle for the BCH controller node. The required
+  properties for this node are described below. If this is not specified,
+  software BCH will be used instead.
+
+Optional children nodes:
+- Individual NAND chips are children of the NAND controller node.
+
+Required children node properties:
+- reg: An integer ranging from 1 to 6 representing the CS line to use.
+
+Optional children node properties:
+- nand-ecc-step-size: ECC block size in bytes.
+- nand-ecc-strength: ECC strength (max number of correctable bits).
+- nand-ecc-mode: String, operation mode of the NAND ecc mode. "hw" by default
+- nand-on-flash-bbt: boolean to enable on flash bbt option, if not present false
+- rb-gpios: GPIO specifier for the busy pin.
+- wp-gpios: GPIO specifier for the write protect pin.
+
+Optional child node of NAND chip nodes:
+- partitions: see Documentation/devicetree/bindings/mtd/partition.txt
+
+Example:
+
+nemc: nemc@13410000 {
+	...
+
+	nandc: nand-controller@1 {
+		compatible = "ingenic,jz4780-nand";
+		reg = <1 0 0x1000000>;	/* Bank 1 */
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ingenic,bch-controller = <&bch>;
+
+		nand@1 {
+			reg = <1>;
+
+			nand-ecc-step-size = <1024>;
+			nand-ecc-strength = <24>;
+			nand-ecc-mode = "hw";
+			nand-on-flash-bbt;
+
+			rb-gpios = <&gpa 20 GPIO_ACTIVE_LOW>;
+			wp-gpios = <&gpf 22 GPIO_ACTIVE_LOW>;
+
+			partitions {
+				#address-cells = <2>;
+				#size-cells = <2>;
+				...
+			}
+		};
+	};
+};
+
+The BCH controller is a separate SoC component used for error correction on
+NAND devices. The following is a description of the device properties for a
+BCH controller.
+
+Required BCH properties:
+- compatible: Should be set to "ingenic,jz4780-bch".
+- reg: Should specify the BCH controller registers location and length.
+- clocks: Clock for the BCH controller.
+
+Example:
+
+bch: bch@134d0000 {
+	compatible = "ingenic,jz4780-bch";
+	reg = <0x134d0000 0x10000>;
+
+	clocks = <&cgu JZ4780_CLK_BCH>;
+};
-- 
2.6.4

Re: [PATCH v11 1/3] dt-bindings: binding for jz4780-{nand,bch}

[Brian Norris]

On Mon, Jan 04, 2016 at 12:34:42PM +0000, Harvey Hunt wrote:
> From: Alex Smith <alex.smith@imgtec.com>
> 
> Add DT bindings for NAND devices connected to the NEMC on JZ4780 SoCs,
> as well as the hardware BCH controller, used by the jz4780_{nand,bch}
> drivers.
> 
> Signed-off-by: Alex Smith <alex.smith@imgtec.com>
> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
> Cc: David Woodhouse <dwmw2@infradead.org>
> Cc: Brian Norris <computersforpeace@gmail.com>
> Cc: linux-mtd@lists.infradead.org
> Cc: devicetree@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Cc: robh@kernel.org
> Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com>
> Acked-by: Rob Herring <robh@kernel.org>
> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> ---
> v10 -> v11:
>  - Added Boris Brezillon's Reviewed-By.

Applied just patch 1 for now. I had some small comments on patch 2. And
you need to send patch 3 to linux-mips and the MIPS maintainer.

Brian

[PATCH v11 2/3] mtd: nand: jz4780: driver for NAND devices on JZ4780 SoCs

[Harvey Hunt]

From: Alex Smith <alex.smith@imgtec.com>

Add a driver for NAND devices connected to the NEMC on JZ4780 SoCs, as
well as the hardware BCH controller. DMA is not currently implemented.

While older 47xx SoCs also have a BCH controller, they are incompatible
with the one in the 4780 due to differing register/bit positions, which
would make implementing a common driver for them quite messy.

Signed-off-by: Alex Smith <alex.smith@imgtec.com>
Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: linux-mtd@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
v10 -> v11:
 - Reordered mutex unlocking.
 - Made jz4780_bch_get() private.
 - Removed extern prefix from function prototype definitions.
 - Removed a useless else.
 - Changed ECC strength print statement.
 - Implemented jz4780_nand_cleanup_chips().
 - Add a NAND chip to the NFC's list after it has been initialised.
 - Complain when NAND_ECC_HW_SYNDROME is selected.
 - Call jz4780_bch_release() from jz4780_nand_probe().
 - Added Boris Brezillon's Reviewed-By.

v9 -> v10:
 - Replace uint{8,32}_t with u{8,32}.
 - Only set IO_ADDR_{R,W} during chip init.
 - Check that ECC layout fits into OOB area.
 - Rebase onto l2-mtd/master and use its new functions.
 - Remove mtd field from jz4780_nand_chip.
 - Tidied up jz4780_nand_cmd_ctrl.
 - Corrected ECC mode print statement.
 - Refactor BCH code.
 - Implement of_jz4780_bch_get.
 - Update Authorship.
 - Use a mutex to protect accesses to BCH controller.
 - Update code documentation.
 - Checkpatch cleanup.

v8 -> v9:
 - No change.

v7 -> v8:
 - Rebase to 4.4-rc3.
 - Add _US suffixes to time constants.
 - Add locking to BCH hardware accesses.
 - Don't print ECC info if ECC is not being used.
 - Default to No ECC.
 - Let the NAND core handle ECC layout in certain cases.
 - Use the gpio_desc consumer interface.
 - Removed gpio active low flags.
 - Check for the BCH controller before initialising a chip.
 - Add a jz4780_nand_controller struct.
 - Initialise chips by iterating over DT child nodes. 

v6 -> v7:
 - Add nand-ecc-mode to DT bindings.
 - Add nand-on-flash-bbt to DT bindings.

v5 -> v6:
 - No change.

v4 -> v5:
 - Rename ingenic,bch-device to ingenic,bch-controller to fit with
   existing convention.

v3 -> v4:
 - No change

v2 -> v3:
 - Rebase to 4.0-rc6
 - Changed ingenic,ecc-size to common nand-ecc-step-size
 - Changed ingenic,ecc-strength to common nand-ecc-strength
 - Changed ingenic,busy-gpio to common rb-gpios
 - Changed ingenic,wp-gpio to common wp-gpios

v1 -> v2:
 - Rebase to 4.0-rc3

 drivers/mtd/nand/Kconfig       |   7 +
 drivers/mtd/nand/Makefile      |   1 +
 drivers/mtd/nand/jz4780_bch.c  | 380 +++++++++++++++++++++++++++++++++++++
 drivers/mtd/nand/jz4780_bch.h  |  43 +++++
 drivers/mtd/nand/jz4780_nand.c | 422 +++++++++++++++++++++++++++++++++++++++++
 5 files changed, 853 insertions(+)
 create mode 100644 drivers/mtd/nand/jz4780_bch.c
 create mode 100644 drivers/mtd/nand/jz4780_bch.h
 create mode 100644 drivers/mtd/nand/jz4780_nand.c

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 2896640..b742adc 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -519,6 +519,13 @@ config MTD_NAND_JZ4740
 	help
 		Enables support for NAND Flash on JZ4740 SoC based boards.
 
+config MTD_NAND_JZ4780
+	tristate "Support for NAND on JZ4780 SoC"
+	depends on MACH_JZ4780 && JZ4780_NEMC
+	help
+	  Enables support for NAND Flash connected to the NEMC on JZ4780 SoC
+	  based boards, using the BCH controller for hardware error correction.
+
 config MTD_NAND_FSMC
 	tristate "Support for NAND on ST Micros FSMC"
 	depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || MACH_U300
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 2c7f014..9e36233 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -49,6 +49,7 @@ obj-$(CONFIG_MTD_NAND_MPC5121_NFC)	+= mpc5121_nfc.o
 obj-$(CONFIG_MTD_NAND_VF610_NFC)	+= vf610_nfc.o
 obj-$(CONFIG_MTD_NAND_RICOH)		+= r852.o
 obj-$(CONFIG_MTD_NAND_JZ4740)		+= jz4740_nand.o
+obj-$(CONFIG_MTD_NAND_JZ4780)		+= jz4780_nand.o jz4780_bch.o
 obj-$(CONFIG_MTD_NAND_GPMI_NAND)	+= gpmi-nand/
 obj-$(CONFIG_MTD_NAND_XWAY)		+= xway_nand.o
 obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH)	+= bcm47xxnflash/
diff --git a/drivers/mtd/nand/jz4780_bch.c b/drivers/mtd/nand/jz4780_bch.c
new file mode 100644
index 0000000..53b2c06
--- /dev/null
+++ b/drivers/mtd/nand/jz4780_bch.c
@@ -0,0 +1,380 @@
+/*
+ * JZ4780 BCH controller
+ *
+ * Copyright (c) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+#include "jz4780_bch.h"
+
+#define BCH_BHCR			0x0
+#define BCH_BHCCR			0x8
+#define BCH_BHCNT			0xc
+#define BCH_BHDR			0x10
+#define BCH_BHPAR0			0x14
+#define BCH_BHERR0			0x84
+#define BCH_BHINT			0x184
+#define BCH_BHINTES			0x188
+#define BCH_BHINTEC			0x18c
+#define BCH_BHINTE			0x190
+
+#define BCH_BHCR_BSEL_SHIFT		4
+#define BCH_BHCR_BSEL_MASK		(0x7f << BCH_BHCR_BSEL_SHIFT)
+#define BCH_BHCR_ENCE			BIT(2)
+#define BCH_BHCR_INIT			BIT(1)
+#define BCH_BHCR_BCHE			BIT(0)
+
+#define BCH_BHCNT_PARITYSIZE_SHIFT	16
+#define BCH_BHCNT_PARITYSIZE_MASK	(0x7f << BCH_BHCNT_PARITYSIZE_SHIFT)
+#define BCH_BHCNT_BLOCKSIZE_SHIFT	0
+#define BCH_BHCNT_BLOCKSIZE_MASK	(0x7ff << BCH_BHCNT_BLOCKSIZE_SHIFT)
+
+#define BCH_BHERR_MASK_SHIFT		16
+#define BCH_BHERR_MASK_MASK		(0xffff << BCH_BHERR_MASK_SHIFT)
+#define BCH_BHERR_INDEX_SHIFT		0
+#define BCH_BHERR_INDEX_MASK		(0x7ff << BCH_BHERR_INDEX_SHIFT)
+
+#define BCH_BHINT_ERRC_SHIFT		24
+#define BCH_BHINT_ERRC_MASK		(0x7f << BCH_BHINT_ERRC_SHIFT)
+#define BCH_BHINT_TERRC_SHIFT		16
+#define BCH_BHINT_TERRC_MASK		(0x7f << BCH_BHINT_TERRC_SHIFT)
+#define BCH_BHINT_DECF			BIT(3)
+#define BCH_BHINT_ENCF			BIT(2)
+#define BCH_BHINT_UNCOR			BIT(1)
+#define BCH_BHINT_ERR			BIT(0)
+
+#define BCH_CLK_RATE			(200 * 1000 * 1000)
+
+/* Timeout for BCH calculation/correction. */
+#define BCH_TIMEOUT_US			100000
+
+struct jz4780_bch {
+	struct device *dev;
+	void __iomem *base;
+	struct clk *clk;
+	struct mutex lock;
+};
+
+static void jz4780_bch_init(struct jz4780_bch *bch,
+			    struct jz4780_bch_params *params, bool encode)
+{
+	u32 reg;
+
+	/* Clear interrupt status. */
+	writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT);
+
+	/* Set up BCH count register. */
+	reg = params->size << BCH_BHCNT_BLOCKSIZE_SHIFT;
+	reg |= params->bytes << BCH_BHCNT_PARITYSIZE_SHIFT;
+	writel(reg, bch->base + BCH_BHCNT);
+
+	/* Initialise and enable BCH. */
+	reg = BCH_BHCR_BCHE | BCH_BHCR_INIT;
+	reg |= params->strength << BCH_BHCR_BSEL_SHIFT;
+	if (encode)
+		reg |= BCH_BHCR_ENCE;
+	writel(reg, bch->base + BCH_BHCR);
+}
+
+static void jz4780_bch_disable(struct jz4780_bch *bch)
+{
+	writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT);
+	writel(BCH_BHCR_BCHE, bch->base + BCH_BHCCR);
+}
+
+static void jz4780_bch_write_data(struct jz4780_bch *bch, const void *buf,
+				  size_t size)
+{
+	size_t size32 = size / sizeof(u32);
+	size_t size8 = size % sizeof(u32);
+	const u32 *src32;
+	const u8 *src8;
+
+	src32 = (const u32 *)buf;
+	while (size32--)
+		writel(*src32++, bch->base + BCH_BHDR);
+
+	src8 = (const u8 *)src32;
+	while (size8--)
+		writeb(*src8++, bch->base + BCH_BHDR);
+}
+
+static void jz4780_bch_read_parity(struct jz4780_bch *bch, void *buf,
+				   size_t size)
+{
+	size_t size32 = size / sizeof(u32);
+	size_t size8 = size % sizeof(u32);
+	u32 *dest32;
+	u8 *dest8;
+	u32 val, offset = 0;
+
+	dest32 = (u32 *)buf;
+	while (size32--) {
+		*dest32++ = readl(bch->base + BCH_BHPAR0 + offset);
+		offset += sizeof(u32);
+	}
+
+	dest8 = (u8 *)dest32;
+	val = readl(bch->base + BCH_BHPAR0 + offset);
+	switch (size8) {
+	case 3:
+		dest8[2] = (val >> 16) & 0xff;
+	case 2:
+		dest8[1] = (val >> 8) & 0xff;
+	case 1:
+		dest8[0] = val & 0xff;
+		break;
+	}
+}
+
+static bool jz4780_bch_wait_complete(struct jz4780_bch *bch, unsigned int irq,
+				     u32 *status)
+{
+	u32 reg;
+	int ret;
+
+	/*
+	 * While we could use interrupts here and sleep until the operation
+	 * completes, the controller works fairly quickly (usually a few
+	 * microseconds) and so the overhead of sleeping until we get an
+	 * interrupt quite noticeably decreases performance.
+	 */
+	ret = readl_poll_timeout(bch->base + BCH_BHINT, reg,
+				 (reg & irq) == irq, 0, BCH_TIMEOUT_US);
+	if (ret)
+		return false;
+
+	if (status)
+		*status = reg;
+
+	writel(reg, bch->base + BCH_BHINT);
+	return true;
+}
+
+/**
+ * jz4780_bch_calculate() - calculate ECC for a data buffer
+ * @bch: BCH device.
+ * @params: BCH parameters.
+ * @buf: input buffer with raw data.
+ * @ecc_code: output buffer with ECC.
+ *
+ * Return: 0 on success, -ETIMEDOUT if timed out while waiting for BCH
+ * controller.
+ */
+int jz4780_bch_calculate(struct jz4780_bch *bch, struct jz4780_bch_params *params,
+			 const u8 *buf, u8 *ecc_code)
+{
+	int ret = 0;
+
+	mutex_lock(&bch->lock);
+	jz4780_bch_init(bch, params, true);
+	jz4780_bch_write_data(bch, buf, params->size);
+
+	if (jz4780_bch_wait_complete(bch, BCH_BHINT_ENCF, NULL)) {
+		jz4780_bch_read_parity(bch, ecc_code, params->bytes);
+	} else {
+		dev_err(bch->dev, "timed out while calculating ECC\n");
+		ret = -ETIMEDOUT;
+	}
+
+	jz4780_bch_disable(bch);
+	mutex_unlock(&bch->lock);
+	return ret;
+}
+EXPORT_SYMBOL(jz4780_bch_calculate);
+
+/**
+ * jz4780_bch_correct() - detect and correct bit errors
+ * @bch: BCH device.
+ * @params: BCH parameters.
+ * @buf: raw data read from the chip.
+ * @ecc_code: ECC read from the chip.
+ *
+ * Given the raw data and the ECC read from the NAND device, detects and
+ * corrects errors in the data.
+ *
+ * Return: the number of bit errors corrected, or -1 if there are too many
+ * errors to correct or we timed out waiting for the controller.
+ */
+int jz4780_bch_correct(struct jz4780_bch *bch, struct jz4780_bch_params *params,
+		       u8 *buf, u8 *ecc_code)
+{
+	u32 reg, mask, index;
+	int i, ret, count;
+
+	mutex_lock(&bch->lock);
+
+	jz4780_bch_init(bch, params, false);
+	jz4780_bch_write_data(bch, buf, params->size);
+	jz4780_bch_write_data(bch, ecc_code, params->bytes);
+
+	if (!jz4780_bch_wait_complete(bch, BCH_BHINT_DECF, &reg)) {
+		dev_err(bch->dev, "timed out while correcting data\n");
+		ret = -1;
+		goto out;
+	}
+
+	if (reg & BCH_BHINT_UNCOR) {
+		dev_warn(bch->dev, "uncorrectable ECC error\n");
+		ret = -1;
+		goto out;
+	}
+
+	/* Correct any detected errors. */
+	if (reg & BCH_BHINT_ERR) {
+		count = (reg & BCH_BHINT_ERRC_MASK) >> BCH_BHINT_ERRC_SHIFT;
+		ret = (reg & BCH_BHINT_TERRC_MASK) >> BCH_BHINT_TERRC_SHIFT;
+
+		for (i = 0; i < count; i++) {
+			reg = readl(bch->base + BCH_BHERR0 + (i * 4));
+			mask = (reg & BCH_BHERR_MASK_MASK) >>
+						BCH_BHERR_MASK_SHIFT;
+			index = (reg & BCH_BHERR_INDEX_MASK) >>
+						BCH_BHERR_INDEX_SHIFT;
+			buf[(index * 2) + 0] ^= mask;
+			buf[(index * 2) + 1] ^= mask >> 8;
+		}
+	} else {
+		ret = 0;
+	}
+
+out:
+	jz4780_bch_disable(bch);
+	mutex_unlock(&bch->lock);
+	return ret;
+}
+EXPORT_SYMBOL(jz4780_bch_correct);
+
+/**
+ * jz4780_bch_get() - get the BCH controller device
+ * @np: BCH device tree node.
+ *
+ * Gets the BCH controller device from the specified device tree node. The
+ * device must be released with jz4780_bch_release() when it is no longer being
+ * used.
+ *
+ * Return: a pointer to jz4780_bch, errors are encoded into the pointer.
+ * PTR_ERR(-EPROBE_DEFER) if the device hasn't been initialised yet.
+ */
+static struct jz4780_bch *jz4780_bch_get(struct device_node *np)
+{
+	struct platform_device *pdev;
+	struct jz4780_bch *bch;
+
+	pdev = of_find_device_by_node(np);
+	if (!pdev || !platform_get_drvdata(pdev))
+		return ERR_PTR(-EPROBE_DEFER);
+
+	get_device(&pdev->dev);
+
+	bch = platform_get_drvdata(pdev);
+	clk_prepare_enable(bch->clk);
+
+	bch->dev = &pdev->dev;
+	return bch;
+}
+
+/**
+ * of_jz4780_bch_get() - get the BCH controller from a DT node
+ * @of_node: the node that contains a bch-controller property.
+ *
+ * Get the bch-controller property from the given device tree
+ * node and pass it to jz4780_bch_get to do the work.
+ *
+ * Return: a pointer to jz4780_bch, errors are encoded into the pointer.
+ * PTR_ERR(-EPROBE_DEFER) if the device hasn't been initialised yet.
+ */
+struct jz4780_bch *of_jz4780_bch_get(struct device_node *of_node)
+{
+	struct jz4780_bch *bch = NULL;
+	struct device_node *np;
+
+	np = of_parse_phandle(of_node, "ingenic,bch-controller", 0);
+
+	if (np) {
+		bch = jz4780_bch_get(np);
+		of_node_put(np);
+	}
+	return bch;
+}
+
+/**
+ * jz4780_bch_release() - release the BCH controller device
+ * @bch: BCH device.
+ */
+void jz4780_bch_release(struct jz4780_bch *bch)
+{
+	clk_disable_unprepare(bch->clk);
+	put_device(bch->dev);
+}
+EXPORT_SYMBOL(jz4780_bch_release);
+
+static int jz4780_bch_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct jz4780_bch *bch;
+	struct resource *res;
+
+	bch = devm_kzalloc(dev, sizeof(*bch), GFP_KERNEL);
+	if (!bch)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	bch->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(bch->base))
+		return PTR_ERR(bch->base);
+
+	jz4780_bch_disable(bch);
+
+	bch->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(bch->clk)) {
+		dev_err(dev, "failed to get clock: %ld\n", PTR_ERR(bch->clk));
+		return PTR_ERR(bch->clk);
+	}
+
+	clk_set_rate(bch->clk, BCH_CLK_RATE);
+
+	mutex_init(&bch->lock);
+
+	bch->dev = dev;
+	platform_set_drvdata(pdev, bch);
+
+	return 0;
+}
+
+static const struct of_device_id jz4780_bch_dt_match[] = {
+	{ .compatible = "ingenic,jz4780-bch" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, jz4780_bch_dt_match);
+
+static struct platform_driver jz4780_bch_driver = {
+	.probe		= jz4780_bch_probe,
+	.driver	= {
+		.name	= "jz4780-bch",
+		.of_match_table = of_match_ptr(jz4780_bch_dt_match),
+	},
+};
+module_platform_driver(jz4780_bch_driver);
+
+MODULE_AUTHOR("Alex Smith <alex@alex-smith.me.uk>");
+MODULE_AUTHOR("Harvey Hunt <harvey.hunt@imgtec.com>");
+MODULE_DESCRIPTION("Ingenic JZ4780 BCH error correction driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/nand/jz4780_bch.h b/drivers/mtd/nand/jz4780_bch.h
new file mode 100644
index 0000000..bf471808
--- /dev/null
+++ b/drivers/mtd/nand/jz4780_bch.h
@@ -0,0 +1,43 @@
+/*
+ * JZ4780 BCH controller
+ *
+ * Copyright (c) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef __DRIVERS_MTD_NAND_JZ4780_BCH_H__
+#define __DRIVERS_MTD_NAND_JZ4780_BCH_H__
+
+#include <linux/types.h>
+
+struct device;
+struct device_node;
+struct jz4780_bch;
+
+/**
+ * struct jz4780_bch_params - BCH parameters
+ * @size: data bytes per ECC step.
+ * @bytes: ECC bytes per step.
+ * @strength: number of correctable bits per ECC step.
+ */
+struct jz4780_bch_params {
+	int size;
+	int bytes;
+	int strength;
+};
+
+int jz4780_bch_calculate(struct jz4780_bch *bch,
+				struct jz4780_bch_params *params,
+				const u8 *buf, u8 *ecc_code);
+int jz4780_bch_correct(struct jz4780_bch *bch,
+			      struct jz4780_bch_params *params, u8 *buf,
+			      u8 *ecc_code);
+
+void jz4780_bch_release(struct jz4780_bch *bch);
+struct jz4780_bch *of_jz4780_bch_get(struct device_node *np);
+
+#endif /* __DRIVERS_MTD_NAND_JZ4780_BCH_H__ */
diff --git a/drivers/mtd/nand/jz4780_nand.c b/drivers/mtd/nand/jz4780_nand.c
new file mode 100644
index 0000000..d8ea35e
--- /dev/null
+++ b/drivers/mtd/nand/jz4780_nand.c
@@ -0,0 +1,422 @@
+/*
+ * JZ4780 NAND driver
+ *
+ * Copyright (c) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of_mtd.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/jz4780-nemc.h>
+
+#include "jz4780_bch.h"
+
+#define DRV_NAME	"jz4780-nand"
+
+#define OFFSET_DATA	0x00000000
+#define OFFSET_CMD	0x00400000
+#define OFFSET_ADDR	0x00800000
+
+/* Command delay when there is no R/B pin. */
+#define RB_DELAY_US	100
+
+struct jz4780_nand_cs {
+	unsigned int bank;
+	void __iomem *base;
+};
+
+struct jz4780_nand_controller {
+	struct device *dev;
+	struct jz4780_bch *bch;
+	struct nand_hw_control controller;
+	unsigned int num_banks;
+	struct list_head chips;
+	int selected;
+	struct jz4780_nand_cs cs[];
+};
+
+struct jz4780_nand_chip {
+	struct nand_chip chip;
+	struct list_head chip_list;
+
+	struct nand_ecclayout ecclayout;
+
+	struct gpio_desc *busy_gpio;
+	struct gpio_desc *wp_gpio;
+	unsigned int reading: 1;
+};
+
+static inline struct jz4780_nand_chip *to_jz4780_nand_chip(struct mtd_info *mtd)
+{
+	return container_of(mtd_to_nand(mtd), struct jz4780_nand_chip, chip);
+}
+
+static inline struct jz4780_nand_controller *to_jz4780_nand_controller(struct nand_hw_control *ctrl)
+{
+	return container_of(ctrl, struct jz4780_nand_controller, controller);
+}
+
+static void jz4780_nand_select_chip(struct mtd_info *mtd, int chipnr)
+{
+	struct jz4780_nand_chip *nand = to_jz4780_nand_chip(mtd);
+	struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller);
+	struct jz4780_nand_cs *cs;
+
+	/* Ensure the currently selected chip is deasserted. */
+	if (chipnr == -1 && nfc->selected >= 0) {
+		cs = &nfc->cs[nfc->selected];
+		jz4780_nemc_assert(nfc->dev, cs->bank, false);
+	}
+
+	nfc->selected = chipnr;
+}
+
+static void jz4780_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+				 unsigned int ctrl)
+{
+	struct jz4780_nand_chip *nand = to_jz4780_nand_chip(mtd);
+	struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller);
+	struct jz4780_nand_cs *cs;
+
+	if (WARN_ON(nfc->selected < 0))
+		return;
+
+	cs = &nfc->cs[nfc->selected];
+
+	jz4780_nemc_assert(nfc->dev, cs->bank, ctrl & NAND_NCE);
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_ALE)
+		writeb(cmd, cs->base + OFFSET_ADDR);
+	else if (ctrl & NAND_CLE)
+		writeb(cmd, cs->base + OFFSET_CMD);
+}
+
+static int jz4780_nand_dev_ready(struct mtd_info *mtd)
+{
+	struct jz4780_nand_chip *nand = to_jz4780_nand_chip(mtd);
+
+	return !gpiod_get_value_cansleep(nand->busy_gpio);
+}
+
+static void jz4780_nand_ecc_hwctl(struct mtd_info *mtd, int mode)
+{
+	struct jz4780_nand_chip *nand = to_jz4780_nand_chip(mtd);
+
+	nand->reading = (mode == NAND_ECC_READ);
+}
+
+static int jz4780_nand_ecc_calculate(struct mtd_info *mtd, const u8 *dat,
+				     u8 *ecc_code)
+{
+	struct jz4780_nand_chip *nand = to_jz4780_nand_chip(mtd);
+	struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller);
+	struct jz4780_bch_params params;
+
+	/*
+	 * Don't need to generate the ECC when reading, BCH does it for us as
+	 * part of decoding/correction.
+	 */
+	if (nand->reading)
+		return 0;
+
+	params.size = nand->chip.ecc.size;
+	params.bytes = nand->chip.ecc.bytes;
+	params.strength = nand->chip.ecc.strength;
+
+	return jz4780_bch_calculate(nfc->bch, &params, dat, ecc_code);
+}
+
+static int jz4780_nand_ecc_correct(struct mtd_info *mtd, u8 *dat,
+				   u8 *read_ecc, u8 *calc_ecc)
+{
+	struct jz4780_nand_chip *nand = to_jz4780_nand_chip(mtd);
+	struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller);
+	struct jz4780_bch_params params;
+
+	params.size = nand->chip.ecc.size;
+	params.bytes = nand->chip.ecc.bytes;
+	params.strength = nand->chip.ecc.strength;
+
+	return jz4780_bch_correct(nfc->bch, &params, dat, read_ecc);
+}
+
+static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *dev)
+{
+	struct nand_chip *chip = &nand->chip;
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(chip->controller);
+	struct nand_ecclayout *layout = &nand->ecclayout;
+	u32 start, i;
+
+	chip->ecc.bytes = fls((1 + 8) * chip->ecc.size)	*
+				(chip->ecc.strength / 8);
+
+	if (nfc->bch && chip->ecc.mode == NAND_ECC_HW) {
+		chip->ecc.hwctl = jz4780_nand_ecc_hwctl;
+		chip->ecc.calculate = jz4780_nand_ecc_calculate;
+		chip->ecc.correct = jz4780_nand_ecc_correct;
+	} else if (!nfc->bch && chip->ecc.mode == NAND_ECC_HW) {
+		dev_err(dev, "HW BCH selected, but BCH controller not found\n");
+		return -ENODEV;
+	}
+
+	if (chip->ecc.mode == NAND_ECC_HW_SYNDROME) {
+		dev_err(dev, "ECC HW syndrome not supported\n");
+		return -EINVAL;
+	}
+
+	if (chip->ecc.mode != NAND_ECC_NONE)
+		dev_info(dev, "using %s (strength %d, size %d, bytes %d)\n",
+			(nfc->bch) ? "hardware BCH" : "software ECC",
+			chip->ecc.strength, chip->ecc.size, chip->ecc.bytes);
+	else
+		dev_info(dev, "not using ECC\n");
+
+	/* The NAND core will generate the ECC layout. */
+	if (chip->ecc.mode == NAND_ECC_SOFT || chip->ecc.mode == NAND_ECC_SOFT_BCH)
+		return 0;
+
+	/* Generate ECC layout. ECC codes are right aligned in the OOB area. */
+	layout->eccbytes = mtd->writesize / chip->ecc.size * chip->ecc.bytes;
+
+	if (layout->eccbytes > mtd->oobsize - 2) {
+		dev_err(dev,
+			"invalid ECC config: required %d ECC bytes, but only %d are available",
+			layout->eccbytes, mtd->oobsize - 2);
+		return -EINVAL;
+	}
+
+	start = mtd->oobsize - layout->eccbytes;
+	for (i = 0; i < layout->eccbytes; i++)
+		layout->eccpos[i] = start + i;
+
+	layout->oobfree[0].offset = 2;
+	layout->oobfree[0].length = mtd->oobsize - layout->eccbytes - 2;
+
+	chip->ecc.layout = layout;
+	return 0;
+}
+
+static int jz4780_nand_init_chip(struct platform_device *pdev,
+				struct jz4780_nand_controller *nfc,
+				struct device_node *np,
+				unsigned int chipnr)
+{
+	struct device *dev = &pdev->dev;
+	struct jz4780_nand_chip *nand;
+	struct jz4780_nand_cs *cs;
+	struct resource *res;
+	struct nand_chip *chip;
+	struct mtd_info *mtd;
+	const __be32 *reg;
+	int ret = 0;
+
+	cs = &nfc->cs[chipnr];
+
+	reg = of_get_property(np, "reg", NULL);
+	if (!reg)
+		return -EINVAL;
+
+	cs->bank = be32_to_cpu(*reg);
+
+	jz4780_nemc_set_type(nfc->dev, cs->bank, JZ4780_NEMC_BANK_NAND);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, chipnr);
+	cs->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(cs->base))
+		return PTR_ERR(cs->base);
+
+	nand = devm_kzalloc(dev, sizeof(*nand), GFP_KERNEL);
+	if (!nand)
+		return -ENOMEM;
+
+	nand->busy_gpio = devm_gpiod_get_optional(dev, "rb", GPIOD_IN);
+
+	if (IS_ERR(nand->busy_gpio)) {
+		ret = PTR_ERR(nand->busy_gpio);
+		dev_err(dev, "failed to request busy GPIO: %d\n", ret);
+		return ret;
+	} else if (nand->busy_gpio) {
+		nand->chip.dev_ready = jz4780_nand_dev_ready;
+	}
+
+	nand->wp_gpio = devm_gpiod_get_optional(dev, "wp", GPIOD_OUT_LOW);
+
+	if (IS_ERR(nand->wp_gpio)) {
+		ret = PTR_ERR(nand->wp_gpio);
+		dev_err(dev, "failed to request WP GPIO: %d\n", ret);
+		return ret;
+	}
+
+	chip = &nand->chip;
+	mtd = nand_to_mtd(chip);
+	mtd->priv = chip;
+	mtd->owner = THIS_MODULE;
+	mtd->name = DRV_NAME;
+	mtd->dev.parent = dev;
+
+	chip->IO_ADDR_R = cs->base + OFFSET_DATA;
+	chip->IO_ADDR_W = cs->base + OFFSET_DATA;
+	chip->chip_delay = RB_DELAY_US;
+	chip->options = NAND_NO_SUBPAGE_WRITE;
+	chip->select_chip = jz4780_nand_select_chip;
+	chip->cmd_ctrl = jz4780_nand_cmd_ctrl;
+	chip->ecc.mode = NAND_ECC_HW;
+	chip->controller = &nfc->controller;
+	nand_set_flash_node(chip, np);
+
+	ret = nand_scan_ident(mtd, 1, NULL);
+	if (ret)
+		return ret;
+
+	ret = jz4780_nand_init_ecc(nand, dev);
+	if (ret)
+		return ret;
+
+	ret = nand_scan_tail(mtd);
+	if (ret)
+		return ret;
+
+	ret = mtd_device_register(mtd, NULL, 0);
+	if (ret) {
+		nand_release(mtd);
+		return ret;
+	}
+
+	list_add_tail(&nand->chip_list, &nfc->chips);
+
+	return 0;
+}
+
+static void jz4780_nand_cleanup_chips(struct jz4780_nand_controller *nfc)
+{
+	struct jz4780_nand_chip *chip;
+
+	while (!list_empty(&nfc->chips)) {
+		chip = list_first_entry(&nfc->chips, struct jz4780_nand_chip, chip_list);
+		nand_release(nand_to_mtd(&chip->chip));
+		list_del(&chip->chip_list);
+	}
+}
+
+static int jz4780_nand_init_chips(struct jz4780_nand_controller *nfc,
+				  struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np;
+	int i = 0;
+	int ret;
+	int num_chips = of_get_child_count(dev->of_node);
+
+	if (num_chips > nfc->num_banks) {
+		dev_err(dev, "found %d chips but only %d banks\n", num_chips, nfc->num_banks);
+		return -EINVAL;
+	}
+
+	for_each_child_of_node(dev->of_node, np) {
+		ret = jz4780_nand_init_chip(pdev, nfc, np, i);
+		if (ret) {
+			jz4780_nand_cleanup_chips(nfc);
+			return ret;
+		}
+
+		i++;
+	}
+
+	return 0;
+}
+
+static int jz4780_nand_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	unsigned int num_banks;
+	struct jz4780_nand_controller *nfc;
+	int ret;
+
+	num_banks = jz4780_nemc_num_banks(dev);
+	if (num_banks == 0) {
+		dev_err(dev, "no banks found\n");
+		return -ENODEV;
+	}
+
+	nfc = devm_kzalloc(dev, sizeof(*nfc) + (sizeof(nfc->cs[0]) * num_banks), GFP_KERNEL);
+	if (!nfc)
+		return -ENOMEM;
+
+	/*
+	 * Check for BCH HW before we call nand_scan_ident, to prevent us from
+	 * having to call it again if the BCH driver returns -EPROBE_DEFER.
+	 */
+	nfc->bch = of_jz4780_bch_get(dev->of_node);
+	if (IS_ERR(nfc->bch))
+		return PTR_ERR(nfc->bch);
+
+	nfc->dev = dev;
+	nfc->num_banks = num_banks;
+
+	spin_lock_init(&nfc->controller.lock);
+	INIT_LIST_HEAD(&nfc->chips);
+	init_waitqueue_head(&nfc->controller.wq);
+
+	ret = jz4780_nand_init_chips(nfc, pdev);
+	if (ret)
+		if (nfc->bch)
+			jz4780_bch_release(nfc->bch);
+		return ret;
+
+	platform_set_drvdata(pdev, nfc);
+	return 0;
+}
+
+static int jz4780_nand_remove(struct platform_device *pdev)
+{
+	struct jz4780_nand_controller *nfc = platform_get_drvdata(pdev);
+
+	if (nfc->bch)
+		jz4780_bch_release(nfc->bch);
+
+	jz4780_nand_cleanup_chips(nfc);
+
+	return 0;
+}
+
+static const struct of_device_id jz4780_nand_dt_match[] = {
+	{ .compatible = "ingenic,jz4780-nand" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, jz4780_nand_dt_match);
+
+static struct platform_driver jz4780_nand_driver = {
+	.probe		= jz4780_nand_probe,
+	.remove		= jz4780_nand_remove,
+	.driver	= {
+		.name	= DRV_NAME,
+		.of_match_table = of_match_ptr(jz4780_nand_dt_match),
+	},
+};
+module_platform_driver(jz4780_nand_driver);
+
+MODULE_AUTHOR("Alex Smith <alex@alex-smith.me.uk>");
+MODULE_AUTHOR("Harvey Hunt <harvey.hunt@imgtec.com>");
+MODULE_DESCRIPTION("Ingenic JZ4780 NAND driver");
+MODULE_LICENSE("GPL v2");
-- 
2.6.4

Re: [PATCH v11 2/3] mtd: nand: jz4780: driver for NAND devices on JZ4780 SoCs

[Brian Norris]

Hi Harvey,

On Mon, Jan 04, 2016 at 12:34:43PM +0000, Harvey Hunt wrote:
> From: Alex Smith <alex.smith@imgtec.com>
> 
> Add a driver for NAND devices connected to the NEMC on JZ4780 SoCs, as
> well as the hardware BCH controller. DMA is not currently implemented.
> 
> While older 47xx SoCs also have a BCH controller, they are incompatible
> with the one in the 4780 due to differing register/bit positions, which
> would make implementing a common driver for them quite messy.
> 
> Signed-off-by: Alex Smith <alex.smith@imgtec.com>
> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
> Cc: David Woodhouse <dwmw2@infradead.org>
> Cc: Brian Norris <computersforpeace@gmail.com>
> Cc: linux-mtd@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com>
> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> ---
[...]

>  drivers/mtd/nand/Kconfig       |   7 +
>  drivers/mtd/nand/Makefile      |   1 +
>  drivers/mtd/nand/jz4780_bch.c  | 380 +++++++++++++++++++++++++++++++++++++
>  drivers/mtd/nand/jz4780_bch.h  |  43 +++++
>  drivers/mtd/nand/jz4780_nand.c | 422 +++++++++++++++++++++++++++++++++++++++++
>  5 files changed, 853 insertions(+)
>  create mode 100644 drivers/mtd/nand/jz4780_bch.c
>  create mode 100644 drivers/mtd/nand/jz4780_bch.h
>  create mode 100644 drivers/mtd/nand/jz4780_nand.c
> 
> diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
> index 2896640..b742adc 100644
> --- a/drivers/mtd/nand/Kconfig
> +++ b/drivers/mtd/nand/Kconfig
> @@ -519,6 +519,13 @@ config MTD_NAND_JZ4740
>  	help
>  		Enables support for NAND Flash on JZ4740 SoC based boards.
>  
> +config MTD_NAND_JZ4780
> +	tristate "Support for NAND on JZ4780 SoC"
> +	depends on MACH_JZ4780 && JZ4780_NEMC
> +	help
> +	  Enables support for NAND Flash connected to the NEMC on JZ4780 SoC
> +	  based boards, using the BCH controller for hardware error correction.
> +
>  config MTD_NAND_FSMC
>  	tristate "Support for NAND on ST Micros FSMC"
>  	depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || MACH_U300
> diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
> index 2c7f014..9e36233 100644
> --- a/drivers/mtd/nand/Makefile
> +++ b/drivers/mtd/nand/Makefile
> @@ -49,6 +49,7 @@ obj-$(CONFIG_MTD_NAND_MPC5121_NFC)	+= mpc5121_nfc.o
>  obj-$(CONFIG_MTD_NAND_VF610_NFC)	+= vf610_nfc.o
>  obj-$(CONFIG_MTD_NAND_RICOH)		+= r852.o
>  obj-$(CONFIG_MTD_NAND_JZ4740)		+= jz4740_nand.o
> +obj-$(CONFIG_MTD_NAND_JZ4780)		+= jz4780_nand.o jz4780_bch.o
>  obj-$(CONFIG_MTD_NAND_GPMI_NAND)	+= gpmi-nand/
>  obj-$(CONFIG_MTD_NAND_XWAY)		+= xway_nand.o
>  obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH)	+= bcm47xxnflash/
> diff --git a/drivers/mtd/nand/jz4780_bch.c b/drivers/mtd/nand/jz4780_bch.c
> new file mode 100644
> index 0000000..53b2c06
> --- /dev/null
> +++ b/drivers/mtd/nand/jz4780_bch.c
> @@ -0,0 +1,380 @@

[...]

> +/**
> + * of_jz4780_bch_get() - get the BCH controller from a DT node
> + * @of_node: the node that contains a bch-controller property.
> + *
> + * Get the bch-controller property from the given device tree
> + * node and pass it to jz4780_bch_get to do the work.
> + *
> + * Return: a pointer to jz4780_bch, errors are encoded into the pointer.
> + * PTR_ERR(-EPROBE_DEFER) if the device hasn't been initialised yet.
> + */
> +struct jz4780_bch *of_jz4780_bch_get(struct device_node *of_node)
> +{
> +	struct jz4780_bch *bch = NULL;
> +	struct device_node *np;
> +
> +	np = of_parse_phandle(of_node, "ingenic,bch-controller", 0);
> +
> +	if (np) {
> +		bch = jz4780_bch_get(np);
> +		of_node_put(np);
> +	}
> +	return bch;
> +}

Don't you need to EXPORT_SYMBOL() this one?

[...]

> diff --git a/drivers/mtd/nand/jz4780_bch.h b/drivers/mtd/nand/jz4780_bch.h
> new file mode 100644
> index 0000000..bf471808
> --- /dev/null
> +++ b/drivers/mtd/nand/jz4780_bch.h
> @@ -0,0 +1,43 @@
> +/*
> + * JZ4780 BCH controller
> + *
> + * Copyright (c) 2015 Imagination Technologies
> + * Author: Alex Smith <alex.smith@imgtec.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published
> + * by the Free Software Foundation.
> + */
> +
> +#ifndef __DRIVERS_MTD_NAND_JZ4780_BCH_H__
> +#define __DRIVERS_MTD_NAND_JZ4780_BCH_H__
> +
> +#include <linux/types.h>
> +
> +struct device;
> +struct device_node;
> +struct jz4780_bch;
> +
> +/**
> + * struct jz4780_bch_params - BCH parameters
> + * @size: data bytes per ECC step.
> + * @bytes: ECC bytes per step.
> + * @strength: number of correctable bits per ECC step.
> + */
> +struct jz4780_bch_params {
> +	int size;
> +	int bytes;
> +	int strength;
> +};
> +
> +int jz4780_bch_calculate(struct jz4780_bch *bch,
> +				struct jz4780_bch_params *params,
> +				const u8 *buf, u8 *ecc_code);
> +int jz4780_bch_correct(struct jz4780_bch *bch,
> +			      struct jz4780_bch_params *params, u8 *buf,
> +			      u8 *ecc_code);
> +
> +void jz4780_bch_release(struct jz4780_bch *bch);
> +struct jz4780_bch *of_jz4780_bch_get(struct device_node *np);
> +
> +#endif /* __DRIVERS_MTD_NAND_JZ4780_BCH_H__ */
> diff --git a/drivers/mtd/nand/jz4780_nand.c b/drivers/mtd/nand/jz4780_nand.c
> new file mode 100644
> index 0000000..d8ea35e
> --- /dev/null
> +++ b/drivers/mtd/nand/jz4780_nand.c
> @@ -0,0 +1,422 @@

[...]

> +static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *dev)
> +{
> +	struct nand_chip *chip = &nand->chip;
> +	struct mtd_info *mtd = nand_to_mtd(chip);
> +	struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(chip->controller);
> +	struct nand_ecclayout *layout = &nand->ecclayout;
> +	u32 start, i;
> +
> +	chip->ecc.bytes = fls((1 + 8) * chip->ecc.size)	*
> +				(chip->ecc.strength / 8);
> +
> +	if (nfc->bch && chip->ecc.mode == NAND_ECC_HW) {
> +		chip->ecc.hwctl = jz4780_nand_ecc_hwctl;
> +		chip->ecc.calculate = jz4780_nand_ecc_calculate;
> +		chip->ecc.correct = jz4780_nand_ecc_correct;
> +	} else if (!nfc->bch && chip->ecc.mode == NAND_ECC_HW) {
> +		dev_err(dev, "HW BCH selected, but BCH controller not found\n");
> +		return -ENODEV;
> +	}
> +
> +	if (chip->ecc.mode == NAND_ECC_HW_SYNDROME) {
> +		dev_err(dev, "ECC HW syndrome not supported\n");
> +		return -EINVAL;
> +	}
> +
> +	if (chip->ecc.mode != NAND_ECC_NONE)
> +		dev_info(dev, "using %s (strength %d, size %d, bytes %d)\n",
> +			(nfc->bch) ? "hardware BCH" : "software ECC",
> +			chip->ecc.strength, chip->ecc.size, chip->ecc.bytes);
> +	else
> +		dev_info(dev, "not using ECC\n");

Almost seems like all the above would be clearer as a switch/case
statement.

> +
> +	/* The NAND core will generate the ECC layout. */
> +	if (chip->ecc.mode == NAND_ECC_SOFT || chip->ecc.mode == NAND_ECC_SOFT_BCH)
> +		return 0;
> +
> +	/* Generate ECC layout. ECC codes are right aligned in the OOB area. */
> +	layout->eccbytes = mtd->writesize / chip->ecc.size * chip->ecc.bytes;
> +
> +	if (layout->eccbytes > mtd->oobsize - 2) {
> +		dev_err(dev,
> +			"invalid ECC config: required %d ECC bytes, but only %d are available",
> +			layout->eccbytes, mtd->oobsize - 2);
> +		return -EINVAL;
> +	}
> +
> +	start = mtd->oobsize - layout->eccbytes;
> +	for (i = 0; i < layout->eccbytes; i++)
> +		layout->eccpos[i] = start + i;
> +
> +	layout->oobfree[0].offset = 2;
> +	layout->oobfree[0].length = mtd->oobsize - layout->eccbytes - 2;
> +
> +	chip->ecc.layout = layout;
> +	return 0;
> +}
> +
> +static int jz4780_nand_init_chip(struct platform_device *pdev,
> +				struct jz4780_nand_controller *nfc,
> +				struct device_node *np,
> +				unsigned int chipnr)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct jz4780_nand_chip *nand;
> +	struct jz4780_nand_cs *cs;
> +	struct resource *res;
> +	struct nand_chip *chip;
> +	struct mtd_info *mtd;
> +	const __be32 *reg;
> +	int ret = 0;
> +
> +	cs = &nfc->cs[chipnr];
> +
> +	reg = of_get_property(np, "reg", NULL);
> +	if (!reg)
> +		return -EINVAL;
> +
> +	cs->bank = be32_to_cpu(*reg);

Seems like you could use of_property_read_u32(). Not a big deal though.

> +
> +	jz4780_nemc_set_type(nfc->dev, cs->bank, JZ4780_NEMC_BANK_NAND);
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, chipnr);
> +	cs->base = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(cs->base))
> +		return PTR_ERR(cs->base);
> +
> +	nand = devm_kzalloc(dev, sizeof(*nand), GFP_KERNEL);
> +	if (!nand)
> +		return -ENOMEM;
> +
> +	nand->busy_gpio = devm_gpiod_get_optional(dev, "rb", GPIOD_IN);
> +
> +	if (IS_ERR(nand->busy_gpio)) {
> +		ret = PTR_ERR(nand->busy_gpio);
> +		dev_err(dev, "failed to request busy GPIO: %d\n", ret);
> +		return ret;
> +	} else if (nand->busy_gpio) {
> +		nand->chip.dev_ready = jz4780_nand_dev_ready;
> +	}
> +
> +	nand->wp_gpio = devm_gpiod_get_optional(dev, "wp", GPIOD_OUT_LOW);
> +
> +	if (IS_ERR(nand->wp_gpio)) {
> +		ret = PTR_ERR(nand->wp_gpio);
> +		dev_err(dev, "failed to request WP GPIO: %d\n", ret);
> +		return ret;
> +	}
> +
> +	chip = &nand->chip;
> +	mtd = nand_to_mtd(chip);
> +	mtd->priv = chip;
> +	mtd->owner = THIS_MODULE;

You don't need this line any more.

> +	mtd->name = DRV_NAME;

Looks like you have made some effort to support multiple chips. It'd be
a shame to name them all the same... Maybe use devm_kasprintf() to
construct a unique name for each chip?

> +	mtd->dev.parent = dev;
> +
> +	chip->IO_ADDR_R = cs->base + OFFSET_DATA;
> +	chip->IO_ADDR_W = cs->base + OFFSET_DATA;
> +	chip->chip_delay = RB_DELAY_US;
> +	chip->options = NAND_NO_SUBPAGE_WRITE;
> +	chip->select_chip = jz4780_nand_select_chip;
> +	chip->cmd_ctrl = jz4780_nand_cmd_ctrl;
> +	chip->ecc.mode = NAND_ECC_HW;
> +	chip->controller = &nfc->controller;
> +	nand_set_flash_node(chip, np);
> +
> +	ret = nand_scan_ident(mtd, 1, NULL);
> +	if (ret)
> +		return ret;
> +
> +	ret = jz4780_nand_init_ecc(nand, dev);
> +	if (ret)
> +		return ret;
> +
> +	ret = nand_scan_tail(mtd);
> +	if (ret)
> +		return ret;
> +
> +	ret = mtd_device_register(mtd, NULL, 0);
> +	if (ret) {
> +		nand_release(mtd);
> +		return ret;
> +	}
> +
> +	list_add_tail(&nand->chip_list, &nfc->chips);
> +
> +	return 0;
> +}
> +
> +static void jz4780_nand_cleanup_chips(struct jz4780_nand_controller *nfc)
> +{
> +	struct jz4780_nand_chip *chip;
> +
> +	while (!list_empty(&nfc->chips)) {
> +		chip = list_first_entry(&nfc->chips, struct jz4780_nand_chip, chip_list);
> +		nand_release(nand_to_mtd(&chip->chip));
> +		list_del(&chip->chip_list);
> +	}
> +}
> +
> +static int jz4780_nand_init_chips(struct jz4780_nand_controller *nfc,
> +				  struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct device_node *np;
> +	int i = 0;
> +	int ret;
> +	int num_chips = of_get_child_count(dev->of_node);
> +
> +	if (num_chips > nfc->num_banks) {
> +		dev_err(dev, "found %d chips but only %d banks\n", num_chips, nfc->num_banks);
> +		return -EINVAL;
> +	}
> +
> +	for_each_child_of_node(dev->of_node, np) {
> +		ret = jz4780_nand_init_chip(pdev, nfc, np, i);
> +		if (ret) {
> +			jz4780_nand_cleanup_chips(nfc);
> +			return ret;
> +		}
> +
> +		i++;
> +	}
> +
> +	return 0;
> +}
> +
> +static int jz4780_nand_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	unsigned int num_banks;
> +	struct jz4780_nand_controller *nfc;
> +	int ret;
> +
> +	num_banks = jz4780_nemc_num_banks(dev);
> +	if (num_banks == 0) {
> +		dev_err(dev, "no banks found\n");
> +		return -ENODEV;
> +	}
> +
> +	nfc = devm_kzalloc(dev, sizeof(*nfc) + (sizeof(nfc->cs[0]) * num_banks), GFP_KERNEL);
> +	if (!nfc)
> +		return -ENOMEM;
> +
> +	/*
> +	 * Check for BCH HW before we call nand_scan_ident, to prevent us from
> +	 * having to call it again if the BCH driver returns -EPROBE_DEFER.
> +	 */
> +	nfc->bch = of_jz4780_bch_get(dev->of_node);
> +	if (IS_ERR(nfc->bch))
> +		return PTR_ERR(nfc->bch);
> +
> +	nfc->dev = dev;
> +	nfc->num_banks = num_banks;
> +
> +	spin_lock_init(&nfc->controller.lock);
> +	INIT_LIST_HEAD(&nfc->chips);
> +	init_waitqueue_head(&nfc->controller.wq);
> +
> +	ret = jz4780_nand_init_chips(nfc, pdev);
> +	if (ret)
> +		if (nfc->bch)
> +			jz4780_bch_release(nfc->bch);
> +		return ret;

coccinelle and smatch notice that you got the bracing wrong here,
causing the rest of this function to be unreachable:

drivers/mtd/nand/jz4780_nand.c:383:2-32: code aligned with following code on line 385 [coccinelle]
drivers/mtd/nand/jz4780_nand.c:385 jz4780_nand_probe() warn: curly braces intended? [smatch]
drivers/mtd/nand/jz4780_nand.c:387 jz4780_nand_probe() info: ignoring unreachable code. [smatch]
drivers/mtd/nand/jz4780_nand.c:387 jz4780_nand_probe() warn: inconsistent indenting [smatch]

You'd only notice that when you remove the device though.

> +
> +	platform_set_drvdata(pdev, nfc);
> +	return 0;
> +}
> +
> +static int jz4780_nand_remove(struct platform_device *pdev)
> +{
> +	struct jz4780_nand_controller *nfc = platform_get_drvdata(pdev);
> +
> +	if (nfc->bch)
> +		jz4780_bch_release(nfc->bch);
> +
> +	jz4780_nand_cleanup_chips(nfc);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id jz4780_nand_dt_match[] = {
> +	{ .compatible = "ingenic,jz4780-nand" },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, jz4780_nand_dt_match);
> +
> +static struct platform_driver jz4780_nand_driver = {
> +	.probe		= jz4780_nand_probe,
> +	.remove		= jz4780_nand_remove,
> +	.driver	= {
> +		.name	= DRV_NAME,
> +		.of_match_table = of_match_ptr(jz4780_nand_dt_match),
> +	},
> +};
> +module_platform_driver(jz4780_nand_driver);
> +
> +MODULE_AUTHOR("Alex Smith <alex@alex-smith.me.uk>");
> +MODULE_AUTHOR("Harvey Hunt <harvey.hunt@imgtec.com>");
> +MODULE_DESCRIPTION("Ingenic JZ4780 NAND driver");
> +MODULE_LICENSE("GPL v2");

I'd be OK taking this patch with the following appended diff squashed
in. Thoughts?

Brian

diff --git a/drivers/mtd/nand/jz4780_bch.c b/drivers/mtd/nand/jz4780_bch.c
index 53b2c06af5dc..5954fbfa29e9 100644
--- a/drivers/mtd/nand/jz4780_bch.c
+++ b/drivers/mtd/nand/jz4780_bch.c
@@ -314,6 +314,7 @@ struct jz4780_bch *of_jz4780_bch_get(struct device_node *of_node)
 	}
 	return bch;
 }
+EXPORT_SYMBOL(of_jz4780_bch_get);
 
 /**
  * jz4780_bch_release() - release the BCH controller device
diff --git a/drivers/mtd/nand/jz4780_nand.c b/drivers/mtd/nand/jz4780_nand.c
index d8ea35ed1007..17eb9f264187 100644
--- a/drivers/mtd/nand/jz4780_nand.c
+++ b/drivers/mtd/nand/jz4780_nand.c
@@ -271,8 +271,10 @@ static int jz4780_nand_init_chip(struct platform_device *pdev,
 	chip = &nand->chip;
 	mtd = nand_to_mtd(chip);
 	mtd->priv = chip;
-	mtd->owner = THIS_MODULE;
-	mtd->name = DRV_NAME;
+	mtd->name = devm_kasprintf(dev, GFP_KERNEL, "%s.%d", dev_name(dev),
+				   cs->bank);
+	if (!mtd->name)
+		return -ENOMEM;
 	mtd->dev.parent = dev;
 
 	chip->IO_ADDR_R = cs->base + OFFSET_DATA;
@@ -379,10 +381,11 @@ static int jz4780_nand_probe(struct platform_device *pdev)
 	init_waitqueue_head(&nfc->controller.wq);
 
 	ret = jz4780_nand_init_chips(nfc, pdev);
-	if (ret)
+	if (ret) {
 		if (nfc->bch)
 			jz4780_bch_release(nfc->bch);
 		return ret;
+	}
 
 	platform_set_drvdata(pdev, nfc);
 	return 0;

Re: [PATCH v11 2/3] mtd: nand: jz4780: driver for NAND devices on JZ4780 SoCs

[Harvey Hunt]

Hi Brian,

On 07/01/16 01:15, Brian Norris wrote:
> Hi Harvey,
>
> On Mon, Jan 04, 2016 at 12:34:43PM +0000, Harvey Hunt wrote:
>> From: Alex Smith <alex.smith@imgtec.com>
>>
>> Add a driver for NAND devices connected to the NEMC on JZ4780 SoCs, as
>> well as the hardware BCH controller. DMA is not currently implemented.
>>
>> While older 47xx SoCs also have a BCH controller, they are incompatible
>> with the one in the 4780 due to differing register/bit positions, which
>> would make implementing a common driver for them quite messy.
>>
>> Signed-off-by: Alex Smith <alex.smith@imgtec.com>
>> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
>> Cc: David Woodhouse <dwmw2@infradead.org>
>> Cc: Brian Norris <computersforpeace@gmail.com>
>> Cc: linux-mtd@lists.infradead.org
>> Cc: linux-kernel@vger.kernel.org
>> Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com>
>> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
>> ---
> [...]
>
>>   drivers/mtd/nand/Kconfig       |   7 +
>>   drivers/mtd/nand/Makefile      |   1 +
>>   drivers/mtd/nand/jz4780_bch.c  | 380 +++++++++++++++++++++++++++++++++++++
>>   drivers/mtd/nand/jz4780_bch.h  |  43 +++++
>>   drivers/mtd/nand/jz4780_nand.c | 422 +++++++++++++++++++++++++++++++++++++++++
>>   5 files changed, 853 insertions(+)
>>   create mode 100644 drivers/mtd/nand/jz4780_bch.c
>>   create mode 100644 drivers/mtd/nand/jz4780_bch.h
>>   create mode 100644 drivers/mtd/nand/jz4780_nand.c
>>
>> diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
>> index 2896640..b742adc 100644
>> --- a/drivers/mtd/nand/Kconfig
>> +++ b/drivers/mtd/nand/Kconfig
>> @@ -519,6 +519,13 @@ config MTD_NAND_JZ4740
>>   	help
>>   		Enables support for NAND Flash on JZ4740 SoC based boards.
>>
>> +config MTD_NAND_JZ4780
>> +	tristate "Support for NAND on JZ4780 SoC"
>> +	depends on MACH_JZ4780 && JZ4780_NEMC
>> +	help
>> +	  Enables support for NAND Flash connected to the NEMC on JZ4780 SoC
>> +	  based boards, using the BCH controller for hardware error correction.
>> +
>>   config MTD_NAND_FSMC
>>   	tristate "Support for NAND on ST Micros FSMC"
>>   	depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || MACH_U300
>> diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
>> index 2c7f014..9e36233 100644
>> --- a/drivers/mtd/nand/Makefile
>> +++ b/drivers/mtd/nand/Makefile
>> @@ -49,6 +49,7 @@ obj-$(CONFIG_MTD_NAND_MPC5121_NFC)	+= mpc5121_nfc.o
>>   obj-$(CONFIG_MTD_NAND_VF610_NFC)	+= vf610_nfc.o
>>   obj-$(CONFIG_MTD_NAND_RICOH)		+= r852.o
>>   obj-$(CONFIG_MTD_NAND_JZ4740)		+= jz4740_nand.o
>> +obj-$(CONFIG_MTD_NAND_JZ4780)		+= jz4780_nand.o jz4780_bch.o
>>   obj-$(CONFIG_MTD_NAND_GPMI_NAND)	+= gpmi-nand/
>>   obj-$(CONFIG_MTD_NAND_XWAY)		+= xway_nand.o
>>   obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH)	+= bcm47xxnflash/
>> diff --git a/drivers/mtd/nand/jz4780_bch.c b/drivers/mtd/nand/jz4780_bch.c
>> new file mode 100644
>> index 0000000..53b2c06
>> --- /dev/null
>> +++ b/drivers/mtd/nand/jz4780_bch.c
>> @@ -0,0 +1,380 @@
>
> [...]
>
>> +/**
>> + * of_jz4780_bch_get() - get the BCH controller from a DT node
>> + * @of_node: the node that contains a bch-controller property.
>> + *
>> + * Get the bch-controller property from the given device tree
>> + * node and pass it to jz4780_bch_get to do the work.
>> + *
>> + * Return: a pointer to jz4780_bch, errors are encoded into the pointer.
>> + * PTR_ERR(-EPROBE_DEFER) if the device hasn't been initialised yet.
>> + */
>> +struct jz4780_bch *of_jz4780_bch_get(struct device_node *of_node)
>> +{
>> +	struct jz4780_bch *bch = NULL;
>> +	struct device_node *np;
>> +
>> +	np = of_parse_phandle(of_node, "ingenic,bch-controller", 0);
>> +
>> +	if (np) {
>> +		bch = jz4780_bch_get(np);
>> +		of_node_put(np);
>> +	}
>> +	return bch;
>> +}
>
> Don't you need to EXPORT_SYMBOL() this one?
>
> [...]

Correct, I missed that.

>
>> diff --git a/drivers/mtd/nand/jz4780_bch.h b/drivers/mtd/nand/jz4780_bch.h
>> new file mode 100644
>> index 0000000..bf471808
>> --- /dev/null
>> +++ b/drivers/mtd/nand/jz4780_bch.h
>> @@ -0,0 +1,43 @@
>> +/*
>> + * JZ4780 BCH controller
>> + *
>> + * Copyright (c) 2015 Imagination Technologies
>> + * Author: Alex Smith <alex.smith@imgtec.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License version 2 as published
>> + * by the Free Software Foundation.
>> + */
>> +
>> +#ifndef __DRIVERS_MTD_NAND_JZ4780_BCH_H__
>> +#define __DRIVERS_MTD_NAND_JZ4780_BCH_H__
>> +
>> +#include <linux/types.h>
>> +
>> +struct device;
>> +struct device_node;
>> +struct jz4780_bch;
>> +
>> +/**
>> + * struct jz4780_bch_params - BCH parameters
>> + * @size: data bytes per ECC step.
>> + * @bytes: ECC bytes per step.
>> + * @strength: number of correctable bits per ECC step.
>> + */
>> +struct jz4780_bch_params {
>> +	int size;
>> +	int bytes;
>> +	int strength;
>> +};
>> +
>> +int jz4780_bch_calculate(struct jz4780_bch *bch,
>> +				struct jz4780_bch_params *params,
>> +				const u8 *buf, u8 *ecc_code);
>> +int jz4780_bch_correct(struct jz4780_bch *bch,
>> +			      struct jz4780_bch_params *params, u8 *buf,
>> +			      u8 *ecc_code);
>> +
>> +void jz4780_bch_release(struct jz4780_bch *bch);
>> +struct jz4780_bch *of_jz4780_bch_get(struct device_node *np);
>> +
>> +#endif /* __DRIVERS_MTD_NAND_JZ4780_BCH_H__ */
>> diff --git a/drivers/mtd/nand/jz4780_nand.c b/drivers/mtd/nand/jz4780_nand.c
>> new file mode 100644
>> index 0000000..d8ea35e
>> --- /dev/null
>> +++ b/drivers/mtd/nand/jz4780_nand.c
>> @@ -0,0 +1,422 @@
>
> [...]
>
>> +static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *dev)
>> +{
>> +	struct nand_chip *chip = &nand->chip;
>> +	struct mtd_info *mtd = nand_to_mtd(chip);
>> +	struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(chip->controller);
>> +	struct nand_ecclayout *layout = &nand->ecclayout;
>> +	u32 start, i;
>> +
>> +	chip->ecc.bytes = fls((1 + 8) * chip->ecc.size)	*
>> +				(chip->ecc.strength / 8);
>> +
>> +	if (nfc->bch && chip->ecc.mode == NAND_ECC_HW) {
>> +		chip->ecc.hwctl = jz4780_nand_ecc_hwctl;
>> +		chip->ecc.calculate = jz4780_nand_ecc_calculate;
>> +		chip->ecc.correct = jz4780_nand_ecc_correct;
>> +	} else if (!nfc->bch && chip->ecc.mode == NAND_ECC_HW) {
>> +		dev_err(dev, "HW BCH selected, but BCH controller not found\n");
>> +		return -ENODEV;
>> +	}
>> +
>> +	if (chip->ecc.mode == NAND_ECC_HW_SYNDROME) {
>> +		dev_err(dev, "ECC HW syndrome not supported\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	if (chip->ecc.mode != NAND_ECC_NONE)
>> +		dev_info(dev, "using %s (strength %d, size %d, bytes %d)\n",
>> +			(nfc->bch) ? "hardware BCH" : "software ECC",
>> +			chip->ecc.strength, chip->ecc.size, chip->ecc.bytes);
>> +	else
>> +		dev_info(dev, "not using ECC\n");
>
> Almost seems like all the above would be clearer as a switch/case
> statement.

I agree.

>
>> +
>> +	/* The NAND core will generate the ECC layout. */
>> +	if (chip->ecc.mode == NAND_ECC_SOFT || chip->ecc.mode == NAND_ECC_SOFT_BCH)
>> +		return 0;
>> +
>> +	/* Generate ECC layout. ECC codes are right aligned in the OOB area. */
>> +	layout->eccbytes = mtd->writesize / chip->ecc.size * chip->ecc.bytes;
>> +
>> +	if (layout->eccbytes > mtd->oobsize - 2) {
>> +		dev_err(dev,
>> +			"invalid ECC config: required %d ECC bytes, but only %d are available",
>> +			layout->eccbytes, mtd->oobsize - 2);
>> +		return -EINVAL;
>> +	}
>> +
>> +	start = mtd->oobsize - layout->eccbytes;
>> +	for (i = 0; i < layout->eccbytes; i++)
>> +		layout->eccpos[i] = start + i;
>> +
>> +	layout->oobfree[0].offset = 2;
>> +	layout->oobfree[0].length = mtd->oobsize - layout->eccbytes - 2;
>> +
>> +	chip->ecc.layout = layout;
>> +	return 0;
>> +}
>> +
>> +static int jz4780_nand_init_chip(struct platform_device *pdev,
>> +				struct jz4780_nand_controller *nfc,
>> +				struct device_node *np,
>> +				unsigned int chipnr)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +	struct jz4780_nand_chip *nand;
>> +	struct jz4780_nand_cs *cs;
>> +	struct resource *res;
>> +	struct nand_chip *chip;
>> +	struct mtd_info *mtd;
>> +	const __be32 *reg;
>> +	int ret = 0;
>> +
>> +	cs = &nfc->cs[chipnr];
>> +
>> +	reg = of_get_property(np, "reg", NULL);
>> +	if (!reg)
>> +		return -EINVAL;
>> +
>> +	cs->bank = be32_to_cpu(*reg);
>
> Seems like you could use of_property_read_u32(). Not a big deal though.

Ack.

>> +
>> +	jz4780_nemc_set_type(nfc->dev, cs->bank, JZ4780_NEMC_BANK_NAND);
>> +
>> +	res = platform_get_resource(pdev, IORESOURCE_MEM, chipnr);
>> +	cs->base = devm_ioremap_resource(dev, res);
>> +	if (IS_ERR(cs->base))
>> +		return PTR_ERR(cs->base);
>> +
>> +	nand = devm_kzalloc(dev, sizeof(*nand), GFP_KERNEL);
>> +	if (!nand)
>> +		return -ENOMEM;
>> +
>> +	nand->busy_gpio = devm_gpiod_get_optional(dev, "rb", GPIOD_IN);
>> +
>> +	if (IS_ERR(nand->busy_gpio)) {
>> +		ret = PTR_ERR(nand->busy_gpio);
>> +		dev_err(dev, "failed to request busy GPIO: %d\n", ret);
>> +		return ret;
>> +	} else if (nand->busy_gpio) {
>> +		nand->chip.dev_ready = jz4780_nand_dev_ready;
>> +	}
>> +
>> +	nand->wp_gpio = devm_gpiod_get_optional(dev, "wp", GPIOD_OUT_LOW);
>> +
>> +	if (IS_ERR(nand->wp_gpio)) {
>> +		ret = PTR_ERR(nand->wp_gpio);
>> +		dev_err(dev, "failed to request WP GPIO: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	chip = &nand->chip;
>> +	mtd = nand_to_mtd(chip);
>> +	mtd->priv = chip;
>> +	mtd->owner = THIS_MODULE;
>
> You don't need this line any more.

Okay.

>
>> +	mtd->name = DRV_NAME;
>
> Looks like you have made some effort to support multiple chips. It'd be
> a shame to name them all the same... Maybe use devm_kasprintf() to
> construct a unique name for each chip?

You're right.

>
>> +	mtd->dev.parent = dev;
>> +
>> +	chip->IO_ADDR_R = cs->base + OFFSET_DATA;
>> +	chip->IO_ADDR_W = cs->base + OFFSET_DATA;
>> +	chip->chip_delay = RB_DELAY_US;
>> +	chip->options = NAND_NO_SUBPAGE_WRITE;
>> +	chip->select_chip = jz4780_nand_select_chip;
>> +	chip->cmd_ctrl = jz4780_nand_cmd_ctrl;
>> +	chip->ecc.mode = NAND_ECC_HW;
>> +	chip->controller = &nfc->controller;
>> +	nand_set_flash_node(chip, np);
>> +
>> +	ret = nand_scan_ident(mtd, 1, NULL);
>> +	if (ret)
>> +		return ret;
>> +
>> +	ret = jz4780_nand_init_ecc(nand, dev);
>> +	if (ret)
>> +		return ret;
>> +
>> +	ret = nand_scan_tail(mtd);
>> +	if (ret)
>> +		return ret;
>> +
>> +	ret = mtd_device_register(mtd, NULL, 0);
>> +	if (ret) {
>> +		nand_release(mtd);
>> +		return ret;
>> +	}
>> +
>> +	list_add_tail(&nand->chip_list, &nfc->chips);
>> +
>> +	return 0;
>> +}
>> +
>> +static void jz4780_nand_cleanup_chips(struct jz4780_nand_controller *nfc)
>> +{
>> +	struct jz4780_nand_chip *chip;
>> +
>> +	while (!list_empty(&nfc->chips)) {
>> +		chip = list_first_entry(&nfc->chips, struct jz4780_nand_chip, chip_list);
>> +		nand_release(nand_to_mtd(&chip->chip));
>> +		list_del(&chip->chip_list);
>> +	}
>> +}
>> +
>> +static int jz4780_nand_init_chips(struct jz4780_nand_controller *nfc,
>> +				  struct platform_device *pdev)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +	struct device_node *np;
>> +	int i = 0;
>> +	int ret;
>> +	int num_chips = of_get_child_count(dev->of_node);
>> +
>> +	if (num_chips > nfc->num_banks) {
>> +		dev_err(dev, "found %d chips but only %d banks\n", num_chips, nfc->num_banks);
>> +		return -EINVAL;
>> +	}
>> +
>> +	for_each_child_of_node(dev->of_node, np) {
>> +		ret = jz4780_nand_init_chip(pdev, nfc, np, i);
>> +		if (ret) {
>> +			jz4780_nand_cleanup_chips(nfc);
>> +			return ret;
>> +		}
>> +
>> +		i++;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static int jz4780_nand_probe(struct platform_device *pdev)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +	unsigned int num_banks;
>> +	struct jz4780_nand_controller *nfc;
>> +	int ret;
>> +
>> +	num_banks = jz4780_nemc_num_banks(dev);
>> +	if (num_banks == 0) {
>> +		dev_err(dev, "no banks found\n");
>> +		return -ENODEV;
>> +	}
>> +
>> +	nfc = devm_kzalloc(dev, sizeof(*nfc) + (sizeof(nfc->cs[0]) * num_banks), GFP_KERNEL);
>> +	if (!nfc)
>> +		return -ENOMEM;
>> +
>> +	/*
>> +	 * Check for BCH HW before we call nand_scan_ident, to prevent us from
>> +	 * having to call it again if the BCH driver returns -EPROBE_DEFER.
>> +	 */
>> +	nfc->bch = of_jz4780_bch_get(dev->of_node);
>> +	if (IS_ERR(nfc->bch))
>> +		return PTR_ERR(nfc->bch);
>> +
>> +	nfc->dev = dev;
>> +	nfc->num_banks = num_banks;
>> +
>> +	spin_lock_init(&nfc->controller.lock);
>> +	INIT_LIST_HEAD(&nfc->chips);
>> +	init_waitqueue_head(&nfc->controller.wq);
>> +
>> +	ret = jz4780_nand_init_chips(nfc, pdev);
>> +	if (ret)
>> +		if (nfc->bch)
>> +			jz4780_bch_release(nfc->bch);
>> +		return ret;
>
> coccinelle and smatch notice that you got the bracing wrong here,
> causing the rest of this function to be unreachable:
>
> drivers/mtd/nand/jz4780_nand.c:383:2-32: code aligned with following code on line 385 [coccinelle]
> drivers/mtd/nand/jz4780_nand.c:385 jz4780_nand_probe() warn: curly braces intended? [smatch]
> drivers/mtd/nand/jz4780_nand.c:387 jz4780_nand_probe() info: ignoring unreachable code. [smatch]
> drivers/mtd/nand/jz4780_nand.c:387 jz4780_nand_probe() warn: inconsistent indenting [smatch]
>
> You'd only notice that when you remove the device though.

I forgot to run coccinelle on this version of the patchset - I was still 
in Christmas holiday mode ;-)

>
>> +
>> +	platform_set_drvdata(pdev, nfc);
>> +	return 0;
>> +}
>> +
>> +static int jz4780_nand_remove(struct platform_device *pdev)
>> +{
>> +	struct jz4780_nand_controller *nfc = platform_get_drvdata(pdev);
>> +
>> +	if (nfc->bch)
>> +		jz4780_bch_release(nfc->bch);
>> +
>> +	jz4780_nand_cleanup_chips(nfc);
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct of_device_id jz4780_nand_dt_match[] = {
>> +	{ .compatible = "ingenic,jz4780-nand" },
>> +	{},
>> +};
>> +MODULE_DEVICE_TABLE(of, jz4780_nand_dt_match);
>> +
>> +static struct platform_driver jz4780_nand_driver = {
>> +	.probe		= jz4780_nand_probe,
>> +	.remove		= jz4780_nand_remove,
>> +	.driver	= {
>> +		.name	= DRV_NAME,
>> +		.of_match_table = of_match_ptr(jz4780_nand_dt_match),
>> +	},
>> +};
>> +module_platform_driver(jz4780_nand_driver);
>> +
>> +MODULE_AUTHOR("Alex Smith <alex@alex-smith.me.uk>");
>> +MODULE_AUTHOR("Harvey Hunt <harvey.hunt@imgtec.com>");
>> +MODULE_DESCRIPTION("Ingenic JZ4780 NAND driver");
>> +MODULE_LICENSE("GPL v2");
>
> I'd be OK taking this patch with the following appended diff squashed
> in. Thoughts?

It'd be great if you could do that.

Thanks,

Harvey

>
> Brian
>
> diff --git a/drivers/mtd/nand/jz4780_bch.c b/drivers/mtd/nand/jz4780_bch.c
> index 53b2c06af5dc..5954fbfa29e9 100644
> --- a/drivers/mtd/nand/jz4780_bch.c
> +++ b/drivers/mtd/nand/jz4780_bch.c
> @@ -314,6 +314,7 @@ struct jz4780_bch *of_jz4780_bch_get(struct device_node *of_node)
>   	}
>   	return bch;
>   }
> +EXPORT_SYMBOL(of_jz4780_bch_get);
>
>   /**
>    * jz4780_bch_release() - release the BCH controller device
> diff --git a/drivers/mtd/nand/jz4780_nand.c b/drivers/mtd/nand/jz4780_nand.c
> index d8ea35ed1007..17eb9f264187 100644
> --- a/drivers/mtd/nand/jz4780_nand.c
> +++ b/drivers/mtd/nand/jz4780_nand.c
> @@ -271,8 +271,10 @@ static int jz4780_nand_init_chip(struct platform_device *pdev,
>   	chip = &nand->chip;
>   	mtd = nand_to_mtd(chip);
>   	mtd->priv = chip;
> -	mtd->owner = THIS_MODULE;
> -	mtd->name = DRV_NAME;
> +	mtd->name = devm_kasprintf(dev, GFP_KERNEL, "%s.%d", dev_name(dev),
> +				   cs->bank);
> +	if (!mtd->name)
> +		return -ENOMEM;
>   	mtd->dev.parent = dev;
>
>   	chip->IO_ADDR_R = cs->base + OFFSET_DATA;
> @@ -379,10 +381,11 @@ static int jz4780_nand_probe(struct platform_device *pdev)
>   	init_waitqueue_head(&nfc->controller.wq);
>
>   	ret = jz4780_nand_init_chips(nfc, pdev);
> -	if (ret)
> +	if (ret) {
>   		if (nfc->bch)
>   			jz4780_bch_release(nfc->bch);
>   		return ret;
> +	}
>
>   	platform_set_drvdata(pdev, nfc);
>   	return 0;
>

Re: [PATCH v11 2/3] mtd: nand: jz4780: driver for NAND devices on JZ4780 SoCs

[Brian Norris]

On Thu, Jan 07, 2016 at 09:44:46AM +0000, Harvey Hunt wrote:
> On 07/01/16 01:15, Brian Norris wrote:
> >On Mon, Jan 04, 2016 at 12:34:43PM +0000, Harvey Hunt wrote:
> >>From: Alex Smith <alex.smith@imgtec.com>
> >>
> >>Add a driver for NAND devices connected to the NEMC on JZ4780 SoCs, as
> >>well as the hardware BCH controller. DMA is not currently implemented.
> >>
> >>While older 47xx SoCs also have a BCH controller, they are incompatible
> >>with the one in the 4780 due to differing register/bit positions, which
> >>would make implementing a common driver for them quite messy.
> >>
> >>Signed-off-by: Alex Smith <alex.smith@imgtec.com>
> >>Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
> >>Cc: David Woodhouse <dwmw2@infradead.org>
> >>Cc: Brian Norris <computersforpeace@gmail.com>
> >>Cc: linux-mtd@lists.infradead.org
> >>Cc: linux-kernel@vger.kernel.org
> >>Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com>
> >>Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> >>---

[...]

> >I'd be OK taking this patch with the following appended diff squashed
> >in. Thoughts?
> 
> It'd be great if you could do that.

OK, squashed and applied to l2-mtd.git

Thanks,
Brian

[PATCH v11 3/3] MIPS: dts: jz4780/ci20: Add NEMC, BCH and NAND device tree nodes

[Harvey Hunt]

From: Alex Smith <alex.smith@imgtec.com>

Add device tree nodes for the NEMC and BCH to the JZ4780 device tree,
and make use of them in the Ci20 device tree to add a node for the
board's NAND.

Note that since the pinctrl driver is not yet upstream, this includes
neither pin configuration nor busy/write-protect GPIO pins for the
NAND. Use of the NAND relies on the boot loader to have left the pins
configured in a usable state, which should be the case when booted
from the NAND.

Signed-off-by: Alex Smith <alex.smith@imgtec.com>
Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mtd@lists.infradead.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: robh@kernel.org
Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
v10 -> v11:
 - Added Boris Brezillon's Reviewed-By.

v9 -> v10:
 - No change.

v8 -> v9:
 - Represent the partition table as a subnode of a NAND chip. 

v7 -> v8:
 - Describe the NAND chips as children nodes of the NAND controller.
 - Remove ingenic, prefix from ECC settings.
 - Renamed some ECC settings.

v6 -> v7:
 - Add nand-ecc-mode to DT.
 - Add nand-on-flash-bbt to DT.

v4 -> v5:
 - New patch adding DT nodes for the NAND so that the driver can be
   tested.

 arch/mips/boot/dts/ingenic/ci20.dts    | 63 ++++++++++++++++++++++++++++++++++
 arch/mips/boot/dts/ingenic/jz4780.dtsi | 26 ++++++++++++++
 2 files changed, 89 insertions(+)

diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index 9fcb9e7..782258c 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -42,3 +42,66 @@
 &uart4 {
 	status = "okay";
 };
+
+&nemc {
+	status = "okay";
+
+	nandc: nand-controller@1 {
+		compatible = "ingenic,jz4780-nand";
+		reg = <1 0 0x1000000>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ingenic,bch-controller = <&bch>;
+
+		ingenic,nemc-tAS = <10>;
+		ingenic,nemc-tAH = <5>;
+		ingenic,nemc-tBP = <10>;
+		ingenic,nemc-tAW = <15>;
+		ingenic,nemc-tSTRV = <100>;
+
+		nand@1 {
+			reg = <1>;
+
+			nand-ecc-step-size = <1024>;
+			nand-ecc-strength = <24>;
+			nand-ecc-mode = "hw";
+			nand-on-flash-bbt;
+
+			partitions {
+				#address-cells = <2>;
+				#size-cells = <2>;
+
+				partition@0 {
+					label = "u-boot-spl";
+					reg = <0x0 0x0 0x0 0x800000>;
+				};
+
+				partition@0x800000 {
+					label = "u-boot";
+					reg = <0x0 0x800000 0x0 0x200000>;
+				};
+
+				partition@0xa00000 {
+					label = "u-boot-env";
+					reg = <0x0 0xa00000 0x0 0x200000>;
+				};
+
+				partition@0xc00000 {
+					label = "boot";
+					reg = <0x0 0xc00000 0x0 0x4000000>;
+				};
+
+				partition@0x8c00000 {
+					label = "system";
+					reg = <0x0 0x4c00000 0x1 0xfb400000>;
+				};
+			};
+		};
+	};
+};
+
+&bch {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
index 65389f6..b868b42 100644
--- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
@@ -108,4 +108,30 @@
 
 		status = "disabled";
 	};
+
+	nemc: nemc@13410000 {
+		compatible = "ingenic,jz4780-nemc";
+		reg = <0x13410000 0x10000>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <1 0 0x1b000000 0x1000000
+			  2 0 0x1a000000 0x1000000
+			  3 0 0x19000000 0x1000000
+			  4 0 0x18000000 0x1000000
+			  5 0 0x17000000 0x1000000
+			  6 0 0x16000000 0x1000000>;
+
+		clocks = <&cgu JZ4780_CLK_NEMC>;
+
+		status = "disabled";
+	};
+
+	bch: bch@134d0000 {
+		compatible = "ingenic,jz4780-bch";
+		reg = <0x134d0000 0x10000>;
+
+		clocks = <&cgu JZ4780_CLK_BCH>;
+
+		status = "disabled";
+	};
 };
-- 
2.6.4

Re: [PATCH v11 3/3] MIPS: dts: jz4780/ci20: Add NEMC, BCH and NAND device tree nodes

[Brian Norris]

On Mon, Jan 04, 2016 at 12:34:44PM +0000, Harvey Hunt wrote:
> diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
> index 9fcb9e7..782258c 100644
> --- a/arch/mips/boot/dts/ingenic/ci20.dts
> +++ b/arch/mips/boot/dts/ingenic/ci20.dts

As I noted on patch 1, you need to send this to linux-mips + Ralf.

> @@ -42,3 +42,66 @@
>  &uart4 {
>  	status = "okay";
>  };
> +
> +&nemc {
> +	status = "okay";
> +
> +	nandc: nand-controller@1 {
> +		compatible = "ingenic,jz4780-nand";
> +		reg = <1 0 0x1000000>;
> +
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		ingenic,bch-controller = <&bch>;
> +
> +		ingenic,nemc-tAS = <10>;
> +		ingenic,nemc-tAH = <5>;
> +		ingenic,nemc-tBP = <10>;
> +		ingenic,nemc-tAW = <15>;
> +		ingenic,nemc-tSTRV = <100>;
> +
> +		nand@1 {
> +			reg = <1>;
> +
> +			nand-ecc-step-size = <1024>;
> +			nand-ecc-strength = <24>;
> +			nand-ecc-mode = "hw";
> +			nand-on-flash-bbt;
> +
> +			partitions {
> +				#address-cells = <2>;
> +				#size-cells = <2>;

This binding was updated, so you need:

				compatible = "fixed-partitions";

Brian

> +
> +				partition@0 {
> +					label = "u-boot-spl";
> +					reg = <0x0 0x0 0x0 0x800000>;
> +				};
> +
> +				partition@0x800000 {
> +					label = "u-boot";
> +					reg = <0x0 0x800000 0x0 0x200000>;
> +				};
> +
> +				partition@0xa00000 {
> +					label = "u-boot-env";
> +					reg = <0x0 0xa00000 0x0 0x200000>;
> +				};
> +
> +				partition@0xc00000 {
> +					label = "boot";
> +					reg = <0x0 0xc00000 0x0 0x4000000>;
> +				};
> +
> +				partition@0x8c00000 {
> +					label = "system";
> +					reg = <0x0 0x4c00000 0x1 0xfb400000>;
> +				};
> +			};
> +		};
> +	};
> +};
> +
> +&bch {
> +	status = "okay";
> +};

Brian

Re: [PATCH v11 3/3] MIPS: dts: jz4780/ci20: Add NEMC, BCH and NAND device tree nodes

[Harvey Hunt]

Hi Brian,

On 07/01/16 01:29, Brian Norris wrote:
> On Mon, Jan 04, 2016 at 12:34:44PM +0000, Harvey Hunt wrote:
>> diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
>> index 9fcb9e7..782258c 100644
>> --- a/arch/mips/boot/dts/ingenic/ci20.dts
>> +++ b/arch/mips/boot/dts/ingenic/ci20.dts
>
> As I noted on patch 1, you need to send this to linux-mips + Ralf.

I forgot to CC Ralf on this version, but he took v9 (no change between 
v9 and v11) through linux-mips as can be seen here: 
http://patchwork.linux-mips.org/patch/11695/

>
>> @@ -42,3 +42,66 @@
>>   &uart4 {
>>   	status = "okay";
>>   };
>> +
>> +&nemc {
>> +	status = "okay";
>> +
>> +	nandc: nand-controller@1 {
>> +		compatible = "ingenic,jz4780-nand";
>> +		reg = <1 0 0x1000000>;
>> +
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +
>> +		ingenic,bch-controller = <&bch>;
>> +
>> +		ingenic,nemc-tAS = <10>;
>> +		ingenic,nemc-tAH = <5>;
>> +		ingenic,nemc-tBP = <10>;
>> +		ingenic,nemc-tAW = <15>;
>> +		ingenic,nemc-tSTRV = <100>;
>> +
>> +		nand@1 {
>> +			reg = <1>;
>> +
>> +			nand-ecc-step-size = <1024>;
>> +			nand-ecc-strength = <24>;
>> +			nand-ecc-mode = "hw";
>> +			nand-on-flash-bbt;
>> +
>> +			partitions {
>> +				#address-cells = <2>;
>> +				#size-cells = <2>;
>
> This binding was updated, so you need:
>
> 				compatible = "fixed-partitions";

This has been fixed in mips-linux here: 
http://patchwork.linux-mips.org/patch/11914/

Thanks,

Harvey

>
> Brian
>
>> +
>> +				partition@0 {
>> +					label = "u-boot-spl";
>> +					reg = <0x0 0x0 0x0 0x800000>;
>> +				};
>> +
>> +				partition@0x800000 {
>> +					label = "u-boot";
>> +					reg = <0x0 0x800000 0x0 0x200000>;
>> +				};
>> +
>> +				partition@0xa00000 {
>> +					label = "u-boot-env";
>> +					reg = <0x0 0xa00000 0x0 0x200000>;
>> +				};
>> +
>> +				partition@0xc00000 {
>> +					label = "boot";
>> +					reg = <0x0 0xc00000 0x0 0x4000000>;
>> +				};
>> +
>> +				partition@0x8c00000 {
>> +					label = "system";
>> +					reg = <0x0 0x4c00000 0x1 0xfb400000>;
>> +				};
>> +			};
>> +		};
>> +	};
>> +};
>> +
>> +&bch {
>> +	status = "okay";
>> +};
>
> Brian
>

Re: [PATCH v11 3/3] MIPS: dts: jz4780/ci20: Add NEMC, BCH and NAND device tree nodes

[Brian Norris]

Hi Harvey + Ralf,

On Thu, Jan 07, 2016 at 09:40:13AM +0000, Harvey Hunt wrote:
> On 07/01/16 01:29, Brian Norris wrote:
> >On Mon, Jan 04, 2016 at 12:34:44PM +0000, Harvey Hunt wrote:
> >>diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
> >>index 9fcb9e7..782258c 100644
> >>--- a/arch/mips/boot/dts/ingenic/ci20.dts
> >>+++ b/arch/mips/boot/dts/ingenic/ci20.dts
> >
> >As I noted on patch 1, you need to send this to linux-mips + Ralf.
> 
> I forgot to CC Ralf on this version, but he took v9 (no change
> between v9 and v11) through linux-mips as can be seen here:
> http://patchwork.linux-mips.org/patch/11695/

OK.

> >>@@ -42,3 +42,66 @@
> >>  &uart4 {
> >>  	status = "okay";
> >>  };
> >>+
> >>+&nemc {
> >>+	status = "okay";
> >>+
> >>+	nandc: nand-controller@1 {
> >>+		compatible = "ingenic,jz4780-nand";
> >>+		reg = <1 0 0x1000000>;
> >>+
> >>+		#address-cells = <1>;
> >>+		#size-cells = <0>;
> >>+
> >>+		ingenic,bch-controller = <&bch>;
> >>+
> >>+		ingenic,nemc-tAS = <10>;
> >>+		ingenic,nemc-tAH = <5>;
> >>+		ingenic,nemc-tBP = <10>;
> >>+		ingenic,nemc-tAW = <15>;
> >>+		ingenic,nemc-tSTRV = <100>;
> >>+
> >>+		nand@1 {
> >>+			reg = <1>;
> >>+
> >>+			nand-ecc-step-size = <1024>;
> >>+			nand-ecc-strength = <24>;
> >>+			nand-ecc-mode = "hw";
> >>+			nand-on-flash-bbt;
> >>+
> >>+			partitions {
> >>+				#address-cells = <2>;
> >>+				#size-cells = <2>;
> >
> >This binding was updated, so you need:
> >
> >				compatible = "fixed-partitions";
> 
> This has been fixed in mips-linux here:
> http://patchwork.linux-mips.org/patch/11914/

Ralf: it looks like you applied the DTS changes twice, essentially.
Might want to fix that:

[From arch/mips/boot/dts/ingenic/ci20.dts]
...
&nemc {
	...
	nandc: nand-controller@1 {
		...
		nand@1 {
			...
			partitions {
				compatible = "fixed-partitions";
				...
			};
		};
	};
};

&bch {
	status = "okay";
};

&nemc {
	...
	nandc: nand-controller@1 {
		...
		nand@1 {
			...
			partitions {
				...
			};
		};
	};
};

&bch {
	status = "okay";
};


Brian