From: Marek Vasut <marex@denx.de>
To: Rob Herring <robh@kernel.org>
Cc: linux-mtd@lists.infradead.org,
Graham Moore <grmoore@opensource.altera.com>,
Alan Tull <atull@opensource.altera.com>,
Brian Norris <computersforpeace@gmail.com>,
David Woodhouse <dwmw2@infradead.org>,
Dinh Nguyen <dinguyen@opensource.altera.com>,
"R, Vignesh" <vigneshr@ti.com>,
Yves Vandervennet <yvanderv@opensource.altera.com>,
devicetree@vger.kernel.org
Subject: Re: [PATCH V8 1/2] mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver.
Date: Wed, 13 Jan 2016 03:39:17 +0100 [thread overview]
Message-ID: <201601130339.17520.marex@denx.de> (raw)
In-Reply-To: <20160113022608.GA17483@rob-hp-laptop>
On Wednesday, January 13, 2016 at 03:26:08 AM, Rob Herring wrote:
> On Mon, Jan 11, 2016 at 05:34:45AM +0100, Marek Vasut wrote:
> > From: Graham Moore <grmoore@opensource.altera.com>
> >
> > Add binding document for the Cadence QSPI controller.
> >
> > Signed-off-by: Graham Moore <grmoore@opensource.altera.com>
> > Signed-off-by: Marek Vasut <marex@denx.de>
> > Cc: Alan Tull <atull@opensource.altera.com>
> > Cc: Brian Norris <computersforpeace@gmail.com>
> > Cc: David Woodhouse <dwmw2@infradead.org>
> > Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
> > Cc: Graham Moore <grmoore@opensource.altera.com>
> > Cc: "R, Vignesh" <vigneshr@ti.com>
> > Cc: Yves Vandervennet <yvanderv@opensource.altera.com>
> > Cc: devicetree@vger.kernel.org
> > ---
> >
> > .../devicetree/bindings/mtd/cadence-quadspi.txt | 56
> > ++++++++++++++++++++++ 1 file changed, 56 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
> >
> > V2: Add cdns prefix to driver-specific bindings.
> > V3: Use existing property "is-decoded-cs" instead of creating a
> >
> > duplicate, "ext-decoder". Timing parameters are in nanoseconds,
> > not master reference clocks. Remove bus-num completely.
> >
> > V4: Add new properties fifo-width and trigger-address
> > V7: - Prefix all of the Cadence-specific properties with cdns prefix,
> >
> > those are in particular "cdns,is-decoded-cs", "cdns,fifo-depth",
> > "cdns,fifo-width", "cdns,trigger-address".
> >
> > - Drop bogus properties which were not used and were incorrect.
> >
> > V8: Align lines to 80 chars.
> >
> > diff --git a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
> > b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt new file
> > mode 100644
> > index 0000000..f248056
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
> > @@ -0,0 +1,56 @@
> > +* Cadence Quad SPI controller
> > +
> > +Required properties:
> > +- compatible : Should be "cdns,qspi-nor".
>
> Fine, but I expect to see SOCs using this block add their own compatible
> strings. It wouldn't surprise me that we already have some using this
> block.
>
> Acked-by: Rob Herring <robh@kernel.org>
I finally got an Ack on this, I am so happy :-)
As for the SoCs, there is Altera SoCFPGA Gen 5 and Gen 10 which uses this.
Then there is some TI SoC, but I don't know the model. Vignesh (on CC) would.
Then there is some ST SoC, but I have no idea what that's all about, sorry.
All these SoCs should be capable of tweaking the block to fit their needs
by just the DT properties. I believe they differ only in the FIFO depth and
sometimes someone is greedy and uses 4:16 CS multiplexer, which is an external
passive component, but that's all.
Would we need soc-specific compatible strings if this is the case?
Best regards,
Marek Vasut
next prev parent reply other threads:[~2016-01-13 2:39 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-11 4:34 [PATCH V8 1/2] mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver Marek Vasut
2016-01-11 4:34 ` [PATCH V10 2/2] mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller Marek Vasut
2016-01-11 16:09 ` Dinh Nguyen
2016-01-11 16:32 ` Marek Vasut
2016-01-12 4:41 ` Vignesh R
2016-01-12 13:49 ` Marek Vasut
2016-04-06 16:55 ` R, Vignesh
2016-04-06 19:30 ` Marek Vasut
2016-04-07 4:55 ` Vignesh R
2016-04-13 10:27 ` Marek Vasut
2016-04-13 15:06 ` Marek Vasut
2016-04-14 16:41 ` R, Vignesh
2016-04-14 17:46 ` Marek Vasut
2016-05-13 0:00 ` Trent Piepho
2016-05-13 0:24 ` Marek Vasut
2016-05-13 20:43 ` Trent Piepho
2016-05-25 23:08 ` Marek Vasut
2016-05-25 23:02 ` Marek Vasut
2016-01-11 16:06 ` [PATCH V8 1/2] mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver Dinh Nguyen
2016-01-11 16:32 ` Marek Vasut
2016-01-11 17:03 ` Dinh Nguyen
2016-01-11 17:27 ` Marek Vasut
2016-01-13 2:26 ` Rob Herring
2016-01-13 2:39 ` Marek Vasut [this message]
2016-02-01 21:03 ` Brian Norris
2016-02-01 21:13 ` Marek Vasut
2016-02-04 7:38 ` Vignesh R
2016-02-04 11:25 ` Marek Vasut
2016-02-04 17:04 ` Dinh Nguyen
2016-02-06 7:42 ` Marek Vasut
2016-02-04 17:30 ` R, Vignesh
2016-02-06 7:42 ` Marek Vasut
2016-02-08 11:19 ` Vignesh R
2016-02-08 15:27 ` Marek Vasut
2016-02-10 16:10 ` Graham Moore
2016-02-10 16:17 ` Marek Vasut
2016-03-10 20:55 ` Graham Moore
2016-03-10 21:10 ` Marek Vasut
2016-03-14 18:17 ` Graham Moore
2016-03-14 22:47 ` Marek Vasut
-- strict thread matches above, loose matches on Subject: below --
2016-06-04 0:39 Marek Vasut
2016-06-07 14:00 ` Rob Herring
2016-07-18 17:00 ` Brian Norris
2015-08-21 9:20 Marek Vasut
2015-08-27 17:44 ` vikas
2015-08-27 18:12 ` Marek Vasut
2015-08-27 20:18 ` vikas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201601130339.17520.marex@denx.de \
--to=marex@denx.de \
--cc=atull@opensource.altera.com \
--cc=computersforpeace@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dinguyen@opensource.altera.com \
--cc=dwmw2@infradead.org \
--cc=grmoore@opensource.altera.com \
--cc=linux-mtd@lists.infradead.org \
--cc=robh@kernel.org \
--cc=vigneshr@ti.com \
--cc=yvanderv@opensource.altera.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).