Re: [PATCH v2] mtd: nand: pxa3xx_nand: add register access debug

[Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>]

On 25 Jan 09:29 PM, Robert Jarzmik wrote:
> Add verbose debug for register accesses. This enables easier debugging
> by following where and how hardware is stimulated, and how it answers.
> 
> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
> ---
>  drivers/mtd/nand/pxa3xx_nand.c | 22 +++++++++++++++++-----
>  1 file changed, 17 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
> index e453ae9a17fa..0845d09e14c1 100644
> --- a/drivers/mtd/nand/pxa3xx_nand.c
> +++ b/drivers/mtd/nand/pxa3xx_nand.c
> @@ -136,11 +136,23 @@
>  #define READ_ID_BYTES		7
>  
>  /* macros for registers read/write */
> -#define nand_writel(info, off, val)	\
> -	writel_relaxed((val), (info)->mmio_base + (off))
> -
> -#define nand_readl(info, off)		\
> -	readl_relaxed((info)->mmio_base + (off))
> +#define nand_writel(info, off, val)					\
> +	do {								\
> +		dev_vdbg(&info->pdev->dev,				\
> +			 "%s():%d nand_writel(0x%x, 0x%04x)\n",		\
> +			 __func__, __LINE__, (val), (off));		\
> +		writel_relaxed((val), (info)->mmio_base + (off));	\
> +	} while (0)
> +
> +#define nand_readl(info, off)						\
> +	({								\
> +		unsigned int _v;					\
> +		_v = readl_relaxed((info)->mmio_base + (off));		\
> +		dev_vdbg(&info->pdev->dev,				\
> +			 "%s():%d nand_readl(0x%04x): 0x%x\n",		\
> +			 __func__, __LINE__, (off), _v);		\
> +		_v;							\
> +	})
>  

With verbose debug enabled, it looks like this:

[..]
[   99.909883] pxa3xx-nand f10d0000.nand: pxa3xx_nand_irq():793 nand_readl(0x0014): 0x1
[   99.909896] pxa3xx-nand f10d0000.nand: pxa3xx_nand_irq():843 nand_writel(0x1, 0x0014)
[   99.909902] pxa3xx-nand f10d0000.nand: pxa3xx_nand_irq():857 nand_writel(0x300d3000, 0x0048)
[   99.909909] pxa3xx-nand f10d0000.nand: pxa3xx_nand_irq():858 nand_writel(0x60000, 0x0048)
[   99.909915] pxa3xx-nand f10d0000.nand: pxa3xx_nand_irq():859 nand_writel(0x0, 0x0048)
[   99.909921] pxa3xx-nand f10d0000.nand: pxa3xx_nand_irq():863 nand_writel(0x820, 0x0048)
[   99.910037] pxa3xx-nand f10d0000.nand: pxa3xx_nand_irq():793 nand_readl(0x0014): 0x2

Maybe it would look clearer with:

[   99.910037] pxa3xx-nand f10d0000.nand: pxa3xx_nand_irq():793 nand_readl(0x0014) = 0x2

But if you feel it's just bikeshedding then:

Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>

-- 
Ezequiel Garcia, VanguardiaSur
www.vanguardiasur.com.ar