From: Boris Brezillon <boris.brezillon@free-electrons.com>
To: Richard Weinberger <richard@nod.at>
Cc: linux-mtd@lists.infradead.org, david.oberhollenzer@sigma-star.at
Subject: Re: [PATCH 1/8] mtd-utils: Fix return status in mtd_torture test function
Date: Tue, 26 Apr 2016 09:57:37 +0200 [thread overview]
Message-ID: <20160426095737.5c5b1004@bbrezillon> (raw)
In-Reply-To: <1461622409-14970-2-git-send-email-richard@nod.at>
On Tue, 26 Apr 2016 00:13:22 +0200
Richard Weinberger <richard@nod.at> wrote:
> From: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
>
> This patch fixes the return status of the mtd_torture function
> in libmtd.
>
> The torture test function is currently only used by the ubiformat
> utilitiy to check if a block is bad after a write fails (blocks are
> marked bad if the function returns an error status). However, the
> way the function was written, it ALWAYS returns an error value
> irregardless of whether it failed or not.
>
> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
> Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> ---
> lib/libmtd.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/lib/libmtd.c b/lib/libmtd.c
> index bf6d71f..1717468 100644
> --- a/lib/libmtd.c
> +++ b/lib/libmtd.c
> @@ -939,7 +939,7 @@ static uint8_t patterns[] = {0xa5, 0x5a, 0x0};
> * @patt: the pattern to check
> * @size: buffer size in bytes
> *
> - * This function returns %1 in there are only @patt bytes in @buf, and %0 if
> + * This function returns %0 if there are only @patt bytes in @buf, and %-1 if
> * something else was also found.
> */
> static int check_pattern(const void *buf, uint8_t patt, int size)
> @@ -948,8 +948,8 @@ static int check_pattern(const void *buf, uint8_t patt, int size)
>
> for (i = 0; i < size; i++)
> if (((const uint8_t *)buf)[i] != patt)
> - return 0;
> - return 1;
> + return -1;
> + return 0;
> }
>
> int mtd_torture(libmtd_t desc, const struct mtd_dev_info *mtd, int fd, int eb)
> @@ -973,7 +973,7 @@ int mtd_torture(libmtd_t desc, const struct mtd_dev_info *mtd, int fd, int eb)
> goto out;
>
> err = check_pattern(buf, 0xFF, mtd->eb_size);
> - if (err == 0) {
> + if (err) {
> errmsg("erased PEB %d, but a non-0xFF byte found", eb);
> errno = EIO;
> goto out;
> @@ -992,7 +992,7 @@ int mtd_torture(libmtd_t desc, const struct mtd_dev_info *mtd, int fd, int eb)
> goto out;
>
> err = check_pattern(buf, patterns[i], mtd->eb_size);
> - if (err == 0) {
> + if (err) {
> errmsg("pattern %x checking failed for PEB %d",
> patterns[i], eb);
> errno = EIO;
> @@ -1005,7 +1005,7 @@ int mtd_torture(libmtd_t desc, const struct mtd_dev_info *mtd, int fd, int eb)
>
> out:
> free(buf);
> - return -1;
> + return err;
> }
>
> int mtd_is_bad(const struct mtd_dev_info *mtd, int fd, int eb)
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
next prev parent reply other threads:[~2016-04-26 7:58 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-25 22:13 [RFC] Porting kernel MTD tests to user space Richard Weinberger
2016-04-25 22:13 ` [PATCH 1/8] mtd-utils: Fix return status in mtd_torture test function Richard Weinberger
2016-04-26 7:57 ` Boris Brezillon [this message]
2016-07-13 17:30 ` Brian Norris
2016-07-13 21:59 ` Richard Weinberger
2016-07-13 22:06 ` Brian Norris
2016-04-25 22:13 ` [PATCH 2/8] mtd-utils: Add multi-block erase function Richard Weinberger
2016-04-26 8:04 ` Boris Brezillon
2016-04-27 9:21 ` David Oberhollenzer
2016-04-27 9:27 ` Boris Brezillon
2016-04-25 22:13 ` [PATCH 3/8] mtd-utils: Add flash torture test utility Richard Weinberger
2016-04-26 8:13 ` Boris Brezillon
2016-04-26 14:34 ` Ezequiel Garcia
2016-04-27 9:28 ` David Oberhollenzer
2016-04-25 22:13 ` [PATCH 4/8] mtd-utils: Add flash stress test Utility Richard Weinberger
2016-04-26 8:18 ` Boris Brezillon
2016-04-26 9:22 ` Richard Weinberger
2016-04-26 9:47 ` Boris Brezillon
2016-04-27 16:38 ` Brian Norris
2016-04-25 22:13 ` [PATCH 5/8] mtd-utils: Add flash speed " Richard Weinberger
2016-04-25 22:13 ` [PATCH 6/8] mtd-utils: Add nand flash bit errors test Richard Weinberger
2016-04-25 22:13 ` [PATCH 7/8] mtd-utils: Add flash read test utility Richard Weinberger
2016-04-25 22:13 ` [PATCH 8/8] mtd-utils: Add nand page " Richard Weinberger
2016-04-26 3:13 ` [RFC] Porting kernel MTD tests to user space Ezequiel Garcia
2016-04-26 7:00 ` Richard Weinberger
2016-04-27 16:32 ` Brian Norris
2016-04-26 5:17 ` Artem Bityutskiy
2016-04-26 6:58 ` Richard Weinberger
2016-04-26 7:45 ` Boris Brezillon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160426095737.5c5b1004@bbrezillon \
--to=boris.brezillon@free-electrons.com \
--cc=david.oberhollenzer@sigma-star.at \
--cc=linux-mtd@lists.infradead.org \
--cc=richard@nod.at \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).