Re: [PATCH V8 1/2] mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver

[Rob Herring <robh@kernel.org>]

On Sat, Jun 04, 2016 at 02:39:33AM +0200, Marek Vasut wrote:
> From: Graham Moore <grmoore@opensource.altera.com>
> 
> Add binding document for the Cadence QSPI controller.
> 
> Signed-off-by: Graham Moore <grmoore@opensource.altera.com>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Alan Tull <atull@opensource.altera.com>
> Cc: Brian Norris <computersforpeace@gmail.com>
> Cc: David Woodhouse <dwmw2@infradead.org>
> Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
> Cc: Graham Moore <grmoore@opensource.altera.com>
> Cc: Vignesh R <vigneshr@ti.com>
> Cc: Yves Vandervennet <yvanderv@opensource.altera.com>
> Cc: devicetree@vger.kernel.org
> ---
> V2: Add cdns prefix to driver-specific bindings.
> V3: Use existing property "is-decoded-cs" instead of creating a
>     duplicate, "ext-decoder". Timing parameters are in nanoseconds,
>     not master reference clocks. Remove bus-num completely.
> V4: Add new properties fifo-width and trigger-address
> V7: - Prefix all of the Cadence-specific properties with cdns prefix,
>       those are in particular "cdns,is-decoded-cs", "cdns,fifo-depth",
>       "cdns,fifo-width", "cdns,trigger-address".
>     - Drop bogus properties which were not used and were incorrect.
> V8: Align lines to 80 chars.
> ---
>  .../devicetree/bindings/mtd/cadence-quadspi.txt    | 56 ++++++++++++++++++++++
>  1 file changed, 56 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mtd/cadence-quadspi.txt

Acked-by: Rob Herring <robh@kernel.org>