Re: [PATCH] mtd: spi-nor: Add support for S3AN spi-nor devices

[Boris Brezillon <boris.brezillon@free-electrons.com>]

On Wed, 21 Sep 2016 10:14:20 +0200
Boris Brezillon <boris.brezillon@free-electrons.com> wrote:

> On Wed, 21 Sep 2016 09:57:23 +0200
> Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> wrote:
> 
> > Hi Boris
> > 
> > On Wed, Sep 21, 2016 at 9:07 AM, Boris Brezillon
> > <boris.brezillon@free-electrons.com> wrote:  
> > > Hi Ricardo,
> > >
> > > Please try to pass the version in your subject prefix (pass
> > > --subject-prefix="PATCH vX" to git format-patch).
> > >    
> > 
> > Sorry about that.
> > 
> >   
> > > On Tue, 20 Sep 2016 17:45:51 +0200
> > > Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> wrote:    
> >   
> > >>  /*
> > >> + * This code converts an address to the Default Address Mode, that has non
> > >> + * power of two page sizes. We must support this mode because it is the default
> > >> + * mode supported by Xilinx tools, it can access the whole flash area and
> > >> + * changing over to the Power-of-two mode is irreversible and corrupts the
> > >> + * original data.
> > >> + */
> > >> +static loff_t spi_nor_s3an_addr_convert(struct spi_nor *nor, unsigned int addr)
> > >> +{
> > >> +     unsigned int offset;
> > >> +
> > >> +     offset = (nor->page_size == 264) ? (addr % 264) : (addr % 528);    
> > >
> > > Can you send a new version with
> > >
> > >         offset = addr % nor->page_size;
> > >
> > > to see if kbuild test robot still complains.
> > >    
> > 
> > This code:
> > 
> > static loff_t spi_nor_s3an_addr_convert(struct spi_nor *nor, loff_t addr)
> > {
> > unsigned int offset;
> > 
> > offset = addr % nor->page_size;
> > 
> > return ((addr - offset) << 1) | offset;
> > }
> > 
> > 
> > When built like:
> > 
> >    wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross
> > -O ~/bin/make.cross
> >         chmod +x ~/bin/make.cross
> >         # save the attached .config to linux build tree
> >         make.cross ARCH=blackfin
> > 
> > Produces this error:
> > 
> > 
> > drivers/built-in.o: In function `spi_nor_write':
> > drivers/mtd/spi-nor/spi-nor.c:(.text+0xfeb8): undefined reference to `__moddi3'
> > drivers/built-in.o: In function `spi_nor_read':
> > drivers/mtd/spi-nor/spi-nor.c:(.text+0x10248): undefined reference to `__moddi3'
> > drivers/built-in.o: In function `spi_nor_erase':
> > drivers/mtd/spi-nor/spi-nor.c:(.text+0x1034e): undefined reference to `__moddi3'
> > Makefile:956: recipe for target 'vmlinux' failed
> > 
> > 
> > But I think I found the right combination:
> > 
> > 
> > static loff_t spi_nor_s3an_addr_convert(struct spi_nor *nor, loff_t addr)
> > {
> > unsigned int offset = addr;
> > 
> > offset %= nor->page_size;
> > 
> > return ((addr - offset) << 1) | offset;
> > }
> > 
> > 
> > This one works fine on x86 and blackfin
> > 
> > Sending v7  
> 
> Wait. If you really want to manipulate an loff_t variable, you can do
> 
> 	offset = do_div(addr, nor->page_size);
> 
> 

Actually, you should have an intermediate u64 var, or just turn addr
into an u64 (loff_t is a long long not an unsigned long long).