linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Boris Brezillon <boris.brezillon@free-electrons.com>
To: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
	Brian Norris <computersforpeace@gmail.com>,
	Richard Weinberger <richard@nod.at>,
	David Woodhouse <dwmw2@infradead.org>
Subject: Re: [PATCH] mtd: nand: change return type of nand_get_flash_type() to int
Date: Sun, 6 Nov 2016 23:56:19 +0100	[thread overview]
Message-ID: <20161106235619.6e23916a@bbrezillon> (raw)
In-Reply-To: <1478249348-19596-1-git-send-email-yamada.masahiro@socionext.com>

On Fri,  4 Nov 2016 17:49:08 +0900
Masahiro Yamada <yamada.masahiro@socionext.com> wrote:

> Since commit d1e1f4e42b5d ("mtd: nand: add support for reading ONFI
> parameters from NAND device"), the returned "type" is never used in
> nand_scan_ident().
> 
> Make nand_get_flash_type() simply return an integer value in order
> to avoid unnecessary ERR_PTR/PTR_ERR dance.
> 
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Applied.

Thanks,

Boris

> ---
> 
>  drivers/mtd/nand/nand_base.c | 24 ++++++++++--------------
>  1 file changed, 10 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
> index e5718e5..d337217 100644
> --- a/drivers/mtd/nand/nand_base.c
> +++ b/drivers/mtd/nand/nand_base.c
> @@ -3975,10 +3975,9 @@ static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip,
>  /*
>   * Get the flash and manufacturer id and lookup if the type is supported.
>   */
> -static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
> -						  struct nand_chip *chip,
> -						  int *maf_id, int *dev_id,
> -						  struct nand_flash_dev *type)
> +static int nand_get_flash_type(struct mtd_info *mtd, struct nand_chip *chip,
> +			       int *maf_id, int *dev_id,
> +			       struct nand_flash_dev *type)
>  {
>  	int busw;
>  	int i, maf_idx;
> @@ -4016,7 +4015,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
>  	if (id_data[0] != *maf_id || id_data[1] != *dev_id) {
>  		pr_info("second ID read did not match %02x,%02x against %02x,%02x\n",
>  			*maf_id, *dev_id, id_data[0], id_data[1]);
> -		return ERR_PTR(-ENODEV);
> +		return -ENODEV;
>  	}
>  
>  	if (!type)
> @@ -4043,7 +4042,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
>  	}
>  
>  	if (!type->name)
> -		return ERR_PTR(-ENODEV);
> +		return -ENODEV;
>  
>  	if (!mtd->name)
>  		mtd->name = type->name;
> @@ -4088,7 +4087,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
>  		pr_warn("bus width %d instead %d bit\n",
>  			   (chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
>  			   busw ? 16 : 8);
> -		return ERR_PTR(-EINVAL);
> +		return -EINVAL;
>  	}
>  
>  	nand_decode_bbm_options(mtd, chip, id_data);
> @@ -4130,7 +4129,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
>  	pr_info("%d MiB, %s, erase size: %d KiB, page size: %d, OOB size: %d\n",
>  		(int)(chip->chipsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC",
>  		mtd->erasesize >> 10, mtd->writesize, mtd->oobsize);
> -	return type;
> +	return 0;
>  }
>  
>  static const char * const nand_ecc_modes[] = {
> @@ -4296,7 +4295,6 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
>  {
>  	int i, nand_maf_id, nand_dev_id;
>  	struct nand_chip *chip = mtd_to_nand(mtd);
> -	struct nand_flash_dev *type;
>  	int ret;
>  
>  	ret = nand_dt_init(chip);
> @@ -4319,14 +4317,12 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
>  	nand_set_defaults(chip, chip->options & NAND_BUSWIDTH_16);
>  
>  	/* Read the flash type */
> -	type = nand_get_flash_type(mtd, chip, &nand_maf_id,
> -				   &nand_dev_id, table);
> -
> -	if (IS_ERR(type)) {
> +	ret = nand_get_flash_type(mtd, chip, &nand_maf_id, &nand_dev_id, table);
> +	if (ret) {
>  		if (!(chip->options & NAND_SCAN_SILENT_NODEV))
>  			pr_warn("No NAND device found\n");
>  		chip->select_chip(mtd, -1);
> -		return PTR_ERR(type);
> +		return ret;
>  	}
>  
>  	ret = nand_init_data_interface(chip);

      reply	other threads:[~2016-11-06 22:56 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-04  8:49 [PATCH] mtd: nand: change return type of nand_get_flash_type() to int Masahiro Yamada
2016-11-06 22:56 ` Boris Brezillon [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161106235619.6e23916a@bbrezillon \
    --to=boris.brezillon@free-electrons.com \
    --cc=computersforpeace@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=richard@nod.at \
    --cc=yamada.masahiro@socionext.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).