Re: [PATCH v2 4/6] nand: spi: Add BBT support

[Boris Brezillon <boris.brezillon@free-electrons.com>]

On Wed, 1 Mar 2017 16:52:08 +0800
Peter Pan <peterpandong@micron.com> wrote:

>  /**
> - * spinand_erase - [MTD Interface] erase block(s)
> + * __spinand_erase - erase block(s)
>   * @mtd: MTD device structure
>   * @einfo: erase instruction
> + * @allowbbt: allow to access bbt
>   *
>   * Erase one ore more blocks
>   */
> -static int spinand_erase(struct mtd_info *mtd, struct erase_info *einfo)
> +static int __spinand_erase(struct mtd_info *mtd, struct erase_info *einfo,
> +			int allowbbt)

Please no __ prefixes. Not sure you need the wrappers you define below
BTW.

>  {
>  	struct spinand_device *chip = mtd_to_spinand(mtd);
>  	struct nand_device *nand = mtd_to_nand(mtd);
> @@ -1152,7 +1185,7 @@ static int spinand_erase(struct mtd_info *mtd, struct erase_info *einfo)
>  
>  	while (len) {
>  		/* Check if we have a bad block, we do not erase bad blocks! */
> -		if (spinand_block_bad(mtd, offs, 0)) {
> +		if (spinand_block_checkbad(mtd, offs, 0, allowbbt)) {
>  			pr_warn("%s: attempt to erase a bad block at 0x%012llx\n",
>  			__func__, offs);
>  			einfo->state = MTD_ERASE_FAILED;
> @@ -1193,6 +1226,55 @@ static int spinand_erase(struct mtd_info *mtd, struct erase_info *einfo)
>  	/* Return more or less happy */
>  	return ret;
>  }
> +
> +/**
> + * spinand_erase - [MTD Interface] erase block(s)
> + * @mtd: MTD device structure
> + * @einfo: erase instruction
> + *
> + * Erase one ore more blocks
> + */
> +static int spinand_erase(struct mtd_info *mtd, struct erase_info *einfo)
> +{
> +	return __spinand_erase(mtd, einfo, 0);
> +}
> +
> +
> +static int spinand_erase_bbt(struct nand_device *nand, struct erase_info *einfo)
> +{
> +	return __spinand_erase(nand_to_mtd(nand), einfo, 1);
> +}
> +

[...]


> +static void spinand_fill_nandd(struct spinand_device *chip)
> +{
> +	struct nand_device *nand = &chip->base;
> +
> +	nand->ops = &spinand_ops;
> +}

This is not needed. I did that in the raw NAND framework to ease the
transition to the generic NAND layer, but here, you're
natively supporting it. Just assign nand->ops in spinand_scan_ident().