linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Boris Brezillon <boris.brezillon@free-electrons.com>
To: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: linux-mtd@lists.infradead.org, andrew@lunn.ch,
	computersforpeace@gmail.com, dwmw2@infradead.org,
	linux-kernel@vger.kernel.org, Marek Vasut <marek.vasut@gmail.com>,
	Richard Weinberger <richard@nod.at>,
	Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
Subject: Re: [PATCH v4 3/5] mtd: handle partitioning on devices with 0 erasesize
Date: Mon, 29 May 2017 11:13:53 +0200	[thread overview]
Message-ID: <20170529111353.2287279f@bbrezillon> (raw)
In-Reply-To: <20170524234916.16181-4-chris.packham@alliedtelesis.co.nz>

On Thu, 25 May 2017 11:49:14 +1200
Chris Packham <chris.packham@alliedtelesis.co.nz> wrote:

> erasesize is meaningful for flash devices but for SRAM there is no
> concept of an erase block so erasesize is set to 0. When partitioning
> these devices instead of ensuring partitions fall on erasesize
> boundaries we ensure they fall on writesize boundaries.
> 
> Helped-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>

Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>

> ---
> Changes in v3:
> - new
> Changes in v4:
> - None
> 
>  drivers/mtd/mtdpart.c | 25 ++++++++++++++++---------
>  1 file changed, 16 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
> index ea5e5307f667..5cef1247806c 100644
> --- a/drivers/mtd/mtdpart.c
> +++ b/drivers/mtd/mtdpart.c
> @@ -393,8 +393,11 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
>  			const struct mtd_partition *part, int partno,
>  			uint64_t cur_offset)
>  {
> +	int wr_alignment = master->erasesize ? : master->writesize;
>  	struct mtd_part *slave;
> +	u32 remainder;
>  	char *name;
> +	u64 tmp;
>  
>  	/* allocate the partition structure */
>  	slave = kzalloc(sizeof(*slave), GFP_KERNEL);
> @@ -499,10 +502,11 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
>  	if (slave->offset == MTDPART_OFS_APPEND)
>  		slave->offset = cur_offset;
>  	if (slave->offset == MTDPART_OFS_NXTBLK) {
> +		tmp = cur_offset;
>  		slave->offset = cur_offset;
> -		if (mtd_mod_by_eb(cur_offset, master) != 0) {
> -			/* Round up to next erasesize */
> -			slave->offset = (mtd_div_by_eb(cur_offset, master) + 1) * master->erasesize;
> +		remainder = do_div(tmp, wr_alignment);
> +		if (remainder) {
> +			slave->offset += wr_alignment - remainder;
>  			printk(KERN_NOTICE "Moving partition %d: "
>  			       "0x%012llx -> 0x%012llx\n", partno,
>  			       (unsigned long long)cur_offset, (unsigned long long)slave->offset);
> @@ -567,19 +571,22 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
>  		slave->mtd.erasesize = master->erasesize;
>  	}
>  
> -	if ((slave->mtd.flags & MTD_WRITEABLE) &&
> -	    mtd_mod_by_eb(slave->offset, &slave->mtd)) {
> +	tmp = slave->offset;
> +	remainder = do_div(tmp, wr_alignment);
> +	if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
>  		/* Doesn't start on a boundary of major erase size */
>  		/* FIXME: Let it be writable if it is on a boundary of
>  		 * _minor_ erase size though */
>  		slave->mtd.flags &= ~MTD_WRITEABLE;
> -		printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
> +		printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase/write block boundary -- force read-only\n",
>  			part->name);
>  	}
> -	if ((slave->mtd.flags & MTD_WRITEABLE) &&
> -	    mtd_mod_by_eb(slave->mtd.size, &slave->mtd)) {
> +
> +	tmp = slave->mtd.size;
> +	remainder = do_div(tmp, wr_alignment);
> +	if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
>  		slave->mtd.flags &= ~MTD_WRITEABLE;
> -		printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
> +		printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase/write block -- force read-only\n",
>  			part->name);
>  	}
>  

  reply	other threads:[~2017-05-29  9:14 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-24 23:49 [PATCH v4 0/5] mtd: mchp23k256: device tree and mchp23lcv1024 Chris Packham
2017-05-24 23:49 ` [PATCH v4 1/5] mtd: mchp23k256: Add OF device ID table Chris Packham
2017-05-29  9:13   ` Boris Brezillon
2017-05-31 17:50   ` Rob Herring
2017-05-24 23:49 ` [PATCH v4 2/5] mtd: mchp23k256: switch to mtd_device_register() Chris Packham
2017-05-29  9:13   ` Boris Brezillon
2017-05-24 23:49 ` [PATCH v4 3/5] mtd: handle partitioning on devices with 0 erasesize Chris Packham
2017-05-29  9:13   ` Boris Brezillon [this message]
2017-05-24 23:49 ` [PATCH v4 4/5] mtd: mchp23k256: add partitioning support Chris Packham
2017-05-29  9:14   ` Boris Brezillon
2017-06-01 18:45   ` Brian Norris
2017-05-24 23:49 ` [PATCH v4 5/5] mtd: mchp23k256: Add support for mchp23lcv1024 Chris Packham
2017-05-29  9:15   ` Boris Brezillon
2017-05-31 17:52   ` Rob Herring
2017-06-01 18:46 ` [PATCH v4 0/5] mtd: mchp23k256: device tree and mchp23lcv1024 Brian Norris

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170529111353.2287279f@bbrezillon \
    --to=boris.brezillon@free-electrons.com \
    --cc=andrew@lunn.ch \
    --cc=chris.packham@alliedtelesis.co.nz \
    --cc=computersforpeace@gmail.com \
    --cc=cyrille.pitchen@wedev4u.fr \
    --cc=dwmw2@infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marek.vasut@gmail.com \
    --cc=richard@nod.at \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).