From: Ladislav Michl <ladis@linux-mips.org>
To: linux-mtd@lists.infradead.org, linux-omap@vger.kernel.org
Cc: Roger Quadros <rogerq@ti.com>, Tony Lindgren <tony@atomide.com>,
Boris Brezillon <boris.brezillon@free-electrons.com>,
Kyungmin Park <kyungmin.park@samsung.com>
Subject: [PATCH v3 0/7] OMAP2+ OneNAND driver update
Date: Thu, 9 Nov 2017 10:11:55 +0100 [thread overview]
Message-ID: <20171109091155.6a6azfvjarwvlfh2@lenoch> (raw)
Hi there,
this patch serie updates OMAP2+ OneNAND driver to the present times, making
it fully DT configurable.
Patches 2-6 are intended for 4.15 merge window via mtd-tree as they are
cleanups only.
Patches 1 and 7 are targetted for 4.16 merge window via mtd tree as it seems
nobody tested these changes (on Nokias most importantly) so far.
Please note that unlike previous driver version, which basically ignored
DT specified timings, this one relies on it, so it is important to get
it right in your DT (dumping it from previous kernel version).
In case synchronous timings is requested, it is okay to specify timings
for the slowest chip ever used for you board as it is evetually optimized
after chip probe.
Ladislav Michl (7):
memory: omap-gpmc: Refactor OneNAND support
mtd: onenand: omap2: Remove regulator support
mtd: onenand: omap2: Remove skip initial unlocking support
mtd: onenand: omap2: Remove partitioning support from platform data
mtd: onenand: omap2: Unify OMAP2 and OMAP3 DMA implementation
mtd: onenand: omap2: Do not make delay for GPIO OMAP3 specific
mtd: onenand: omap2: Configure driver from DT
drivers/memory/omap-gpmc.c | 158 ++++++++++----
drivers/mtd/onenand/omap2.c | 512 ++++++++++++++++----------------------------
include/linux/omap-gpmc.h | 25 +++
3 files changed, 330 insertions(+), 365 deletions(-)
--
2.11.0
next reply other threads:[~2017-11-09 9:12 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-09 9:11 Ladislav Michl [this message]
2017-11-09 9:12 ` [PATCH v3 1/7] memory: omap-gpmc: Refactor OneNAND support Ladislav Michl
2017-11-09 17:56 ` Tony Lindgren
2017-11-09 18:10 ` Ladislav Michl
2017-11-09 18:26 ` Tony Lindgren
2017-11-09 18:34 ` Ladislav Michl
2017-11-09 18:48 ` Tony Lindgren
2017-11-09 19:10 ` Ladislav Michl
2017-11-09 21:59 ` Tony Lindgren
2017-11-09 22:26 ` Ladislav Michl
2017-11-10 8:12 ` Roger Quadros
2017-11-09 9:13 ` [PATCH v3 2/7] mtd: onenand: omap2: Remove regulator support Ladislav Michl
2017-11-10 8:17 ` Roger Quadros
2017-11-09 9:14 ` [PATCH v3 3/7] mtd: onenand: omap2: Remove skip initial unlocking support Ladislav Michl
2017-11-10 8:18 ` Roger Quadros
2017-11-09 9:14 ` [PATCH v3 4/7] mtd: onenand: omap2: Remove partitioning support from platform data Ladislav Michl
2017-11-10 8:19 ` Roger Quadros
2017-11-10 9:48 ` Ladislav Michl
2017-11-09 9:15 ` [PATCH v3 5/7] mtd: onenand: omap2: Unify OMAP2 and OMAP3 DMA implementation Ladislav Michl
2017-11-10 8:21 ` Roger Quadros
2017-11-10 9:51 ` Ladislav Michl
2017-11-10 15:26 ` Tony Lindgren
2017-11-10 18:19 ` Ladislav Michl
2017-11-10 18:29 ` Tony Lindgren
2017-11-11 12:50 ` Ladislav Michl
2017-11-13 20:10 ` Peter Ujfalusi
2017-11-14 14:47 ` Roger Quadros
2017-11-14 15:03 ` Ladislav Michl
2017-11-10 8:25 ` Peter Ujfalusi
2017-11-10 10:04 ` Ladislav Michl
2017-11-10 15:24 ` Tony Lindgren
2017-11-10 18:26 ` Ladislav Michl
2017-11-10 18:48 ` Tony Lindgren
2017-11-10 21:39 ` Ladislav Michl
2017-11-14 21:53 ` Tony Lindgren
2017-11-14 22:32 ` Ladislav Michl
2017-11-15 2:11 ` Tony Lindgren
2017-11-13 8:22 ` Peter Ujfalusi
2017-11-13 12:15 ` Ladislav Michl
2017-11-13 14:36 ` Peter Ujfalusi
2017-11-13 15:23 ` Tony Lindgren
2017-11-13 15:27 ` Ladislav Michl
2017-11-14 15:05 ` Roger Quadros
2017-11-14 15:22 ` Ladislav Michl
2017-11-09 9:16 ` [PATCH v3 6/7] mtd: onenand: omap2: Do not make delay for GPIO OMAP3 specific Ladislav Michl
2017-11-09 9:17 ` [PATCH v3 7/7] mtd: onenand: omap2: Configure driver from DT Ladislav Michl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171109091155.6a6azfvjarwvlfh2@lenoch \
--to=ladis@linux-mips.org \
--cc=boris.brezillon@free-electrons.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=rogerq@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox