public inbox for linux-mtd@lists.infradead.org
 help / color / mirror / Atom feed
From: Ladislav Michl <ladis@linux-mips.org>
To: linux-mtd@lists.infradead.org, linux-omap@vger.kernel.org
Cc: Roger Quadros <rogerq@ti.com>, Tony Lindgren <tony@atomide.com>,
	Peter Ujfalusi <peter.ujfalusi@ti.com>,
	Boris Brezillon <boris.brezillon@free-electrons.com>,
	Kyungmin Park <kyungmin.park@samsung.com>
Subject: [PATCH v4 13/16] memory: omap-gpmc: Refactor OneNAND support
Date: Sat, 11 Nov 2017 22:26:12 +0100	[thread overview]
Message-ID: <20171111212612.ynj6ckbu4u2n5i7d@lenoch> (raw)
In-Reply-To: <20171111211206.465pgorrjp3eyix6@lenoch>

Use generic probe function to deal with OneNAND node and remove now useless
gpmc_probe_onenand_child function.
Import sync mode timing calculation function from mach-omap2/gpmc-onenand.c
and prepare for MTD driver DTfication.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
---
 Changes:
 -v2: add gpmc_omap_onenand_set_timings description
 -v3: none
 -v4: none

 drivers/memory/omap-gpmc.c | 158 +++++++++++++++++++++++++++++++++------------
 include/linux/omap-gpmc.h  |  25 +++++++
 2 files changed, 142 insertions(+), 41 deletions(-)

diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
index 0e30ee1c8677..90a66b3f7ae1 100644
--- a/drivers/memory/omap-gpmc.c
+++ b/drivers/memory/omap-gpmc.c
@@ -32,7 +32,6 @@
 #include <linux/pm_runtime.h>
 
 #include <linux/platform_data/mtd-nand-omap2.h>
-#include <linux/platform_data/mtd-onenand-omap2.h>
 
 #include <asm/mach-types.h>
 
@@ -1138,6 +1137,112 @@ struct gpmc_nand_ops *gpmc_omap_get_nand_ops(struct gpmc_nand_regs *reg, int cs)
 }
 EXPORT_SYMBOL_GPL(gpmc_omap_get_nand_ops);
 
+static void gpmc_omap_onenand_calc_sync_timings(struct gpmc_timings *t,
+						struct gpmc_settings *s,
+						int freq, int latency)
+{
+	struct gpmc_device_timings dev_t;
+	const int t_cer  = 15;
+	const int t_avdp = 12;
+	const int t_cez  = 20; /* max of t_cez, t_oez */
+	const int t_wpl  = 40;
+	const int t_wph  = 30;
+	int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo;
+
+	switch (freq) {
+	case 104:
+		min_gpmc_clk_period = 9600; /* 104 MHz */
+		t_ces   = 3;
+		t_avds  = 4;
+		t_avdh  = 2;
+		t_ach   = 3;
+		t_aavdh = 6;
+		t_rdyo  = 6;
+		break;
+	case 83:
+		min_gpmc_clk_period = 12000; /* 83 MHz */
+		t_ces   = 5;
+		t_avds  = 4;
+		t_avdh  = 2;
+		t_ach   = 6;
+		t_aavdh = 6;
+		t_rdyo  = 9;
+		break;
+	case 66:
+		min_gpmc_clk_period = 15000; /* 66 MHz */
+		t_ces   = 6;
+		t_avds  = 5;
+		t_avdh  = 2;
+		t_ach   = 6;
+		t_aavdh = 6;
+		t_rdyo  = 11;
+		break;
+	default:
+		min_gpmc_clk_period = 18500; /* 54 MHz */
+		t_ces   = 7;
+		t_avds  = 7;
+		t_avdh  = 7;
+		t_ach   = 9;
+		t_aavdh = 7;
+		t_rdyo  = 15;
+		break;
+	}
+
+	/* Set synchronous read timings */
+	memset(&dev_t, 0, sizeof(dev_t));
+
+	if (!s->sync_write) {
+		dev_t.t_avdp_w = max(t_avdp, t_cer) * 1000;
+		dev_t.t_wpl = t_wpl * 1000;
+		dev_t.t_wph = t_wph * 1000;
+		dev_t.t_aavdh = t_aavdh * 1000;
+	}
+	dev_t.ce_xdelay = true;
+	dev_t.avd_xdelay = true;
+	dev_t.oe_xdelay = true;
+	dev_t.we_xdelay = true;
+	dev_t.clk = min_gpmc_clk_period;
+	dev_t.t_bacc = dev_t.clk;
+	dev_t.t_ces = t_ces * 1000;
+	dev_t.t_avds = t_avds * 1000;
+	dev_t.t_avdh = t_avdh * 1000;
+	dev_t.t_ach = t_ach * 1000;
+	dev_t.cyc_iaa = (latency + 1);
+	dev_t.t_cez_r = t_cez * 1000;
+	dev_t.t_cez_w = dev_t.t_cez_r;
+	dev_t.cyc_aavdh_oe = 1;
+	dev_t.t_rdyo = t_rdyo * 1000 + min_gpmc_clk_period;
+
+	gpmc_calc_timings(t, s, &dev_t);
+}
+
+int gpmc_omap_onenand_set_timings(struct device *dev, int cs, int freq,
+				  int latency,
+				  struct gpmc_onenand_info *info)
+{
+	int ret;
+	struct gpmc_timings gpmc_t;
+	struct gpmc_settings gpmc_s;
+
+	gpmc_read_settings_dt(dev->of_node, &gpmc_s);
+
+	info->sync_read = gpmc_s.sync_read;
+	info->sync_write = gpmc_s.sync_write;
+	info->burst_len = gpmc_s.burst_len;
+
+	if (!gpmc_s.sync_read && !gpmc_s.sync_write)
+		return 0;
+
+	gpmc_omap_onenand_calc_sync_timings(&gpmc_t, &gpmc_s, freq, latency);
+
+	ret = gpmc_cs_program_settings(cs, &gpmc_s);
+	if (ret < 0)
+		return ret;
+
+	return gpmc_cs_set_timings(cs, &gpmc_t, &gpmc_s);
+}
+EXPORT_SYMBOL_GPL(gpmc_omap_onenand_set_timings);
+
 int gpmc_get_client_irq(unsigned irq_config)
 {
 	if (!gpmc_irq_domain) {
@@ -1916,41 +2021,6 @@ static void __maybe_unused gpmc_read_timings_dt(struct device_node *np,
 		of_property_read_bool(np, "gpmc,time-para-granularity");
 }
 
-#if IS_ENABLED(CONFIG_MTD_ONENAND)
-static int gpmc_probe_onenand_child(struct platform_device *pdev,
-				 struct device_node *child)
-{
-	u32 val;
-	struct omap_onenand_platform_data *gpmc_onenand_data;
-
-	if (of_property_read_u32(child, "reg", &val) < 0) {
-		dev_err(&pdev->dev, "%pOF has no 'reg' property\n",
-			child);
-		return -ENODEV;
-	}
-
-	gpmc_onenand_data = devm_kzalloc(&pdev->dev, sizeof(*gpmc_onenand_data),
-					 GFP_KERNEL);
-	if (!gpmc_onenand_data)
-		return -ENOMEM;
-
-	gpmc_onenand_data->cs = val;
-	gpmc_onenand_data->of_node = child;
-	gpmc_onenand_data->dma_channel = -1;
-
-	if (!of_property_read_u32(child, "dma-channel", &val))
-		gpmc_onenand_data->dma_channel = val;
-
-	return gpmc_onenand_init(gpmc_onenand_data);
-}
-#else
-static int gpmc_probe_onenand_child(struct platform_device *pdev,
-				    struct device_node *child)
-{
-	return 0;
-}
-#endif
-
 /**
  * gpmc_probe_generic_child - configures the gpmc for a child device
  * @pdev:	pointer to gpmc platform device
@@ -2053,6 +2123,16 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
 		}
 	}
 
+	if (of_node_cmp(child->name, "onenand") == 0) {
+		/* Warn about older DT blobs with no compatible property */
+		if (!of_property_read_bool(child, "compatible")) {
+			dev_warn(&pdev->dev,
+				 "Incompatible OneNAND node: missing compatible");
+			ret = -EINVAL;
+			goto err;
+		}
+	}
+
 	if (of_device_is_compatible(child, "ti,omap2-nand")) {
 		/* NAND specific setup */
 		val = 8;
@@ -2189,11 +2269,7 @@ static void gpmc_probe_dt_children(struct platform_device *pdev)
 		if (!child->name)
 			continue;
 
-		if (of_node_cmp(child->name, "onenand") == 0)
-			ret = gpmc_probe_onenand_child(pdev, child);
-		else
-			ret = gpmc_probe_generic_child(pdev, child);
-
+		ret = gpmc_probe_generic_child(pdev, child);
 		if (ret) {
 			dev_err(&pdev->dev, "failed to probe DT child '%s': %d\n",
 				child->name, ret);
diff --git a/include/linux/omap-gpmc.h b/include/linux/omap-gpmc.h
index edfa280c3d56..067bea5e98c4 100644
--- a/include/linux/omap-gpmc.h
+++ b/include/linux/omap-gpmc.h
@@ -25,15 +25,40 @@ struct gpmc_nand_ops {
 
 struct gpmc_nand_regs;
 
+struct gpmc_onenand_info {
+	bool sync_read;
+	bool sync_write;
+	int burst_len;
+};
+
 #if IS_ENABLED(CONFIG_OMAP_GPMC)
 struct gpmc_nand_ops *gpmc_omap_get_nand_ops(struct gpmc_nand_regs *regs,
 					     int cs);
+/**
+ * gpmc_omap_onenand_set_timings - set optimized sync timings.
+ * @cs:      Chip Select Region
+ * @freq:    Chip frequency
+ * @latency: Burst latency cycle count
+ * @info:    Structure describing parameters used
+ */
+int gpmc_omap_onenand_set_timings(struct device *dev, int cs, int freq,
+				  int latency,
+				  struct gpmc_onenand_info *info);
+
 #else
 static inline struct gpmc_nand_ops *gpmc_omap_get_nand_ops(struct gpmc_nand_regs *regs,
 							   int cs)
 {
 	return NULL;
 }
+
+static inline
+int gpmc_omap_onenand_set_timings(struct device *dev, int cs, int freq,
+				  int latency,
+				  struct gpmc_onenand_info *info)
+{
+	return -EINVAL;
+}
 #endif /* CONFIG_OMAP_GPMC */
 
 extern int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
-- 
2.11.0

  parent reply	other threads:[~2017-11-11 21:26 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-11 21:12 [PATCH v4 00/16] OMAP2+ OneNAND driver update Ladislav Michl
2017-11-11 21:17 ` [PATCH v4 02/16] ARM: dts: OMAP2+: Add compatible property to onenand node Ladislav Michl
2017-11-14 15:11   ` Roger Quadros
2017-11-14 23:01     ` Ladislav Michl
2017-11-14 21:39   ` Tony Lindgren
2017-11-11 21:18 ` [PATCH v4 03/16] ARM: dts: omap3-igep: Update onenand node timings Ladislav Michl
2017-11-14 15:12   ` Roger Quadros
2017-11-14 21:39   ` Tony Lindgren
2017-11-11 21:19 ` [PATCH v4 04/16] mtd: onenand: omap2: Remove regulator support Ladislav Michl
2017-11-14 15:13   ` Roger Quadros
2017-11-15 14:15   ` Sebastian Reichel
2017-11-11 21:19 ` [PATCH v4 05/16] mtd: onenand: omap2: Remove skip initial unlocking support Ladislav Michl
2017-11-14 15:14   ` Roger Quadros
2017-11-15 14:16   ` Sebastian Reichel
2017-11-11 21:20 ` [PATCH v4 06/16] mtd: onenand: omap2: Remove partitioning support from platform data Ladislav Michl
2017-11-14 15:14   ` Roger Quadros
2017-11-15 14:57   ` Sebastian Reichel
2017-11-11 21:20 ` [PATCH v4 07/16] mtd: onenand: omap2: Account waiting time as waiting on IO Ladislav Michl
2017-11-14 15:18   ` Roger Quadros
2017-11-15 15:00   ` Sebastian Reichel
2017-11-11 21:21 ` [PATCH v4 08/16] mtd: onenand: omap2: Simplify the DMA setup for various paths Ladislav Michl
2017-11-15  8:35   ` Roger Quadros
2017-11-15 15:05   ` Sebastian Reichel
2017-11-11 21:22 ` [PATCH v4 09/16] mtd: onenand: omap2: Unify OMAP2 and OMAP3 DMA implementation Ladislav Michl
2017-11-15  8:38   ` Roger Quadros
2017-11-15 15:07   ` Sebastian Reichel
2017-11-11 21:23 ` [PATCH v4 10/16] mtd: onenand: omap2: Convert to use dmaengine for memcpy Ladislav Michl
2017-11-15  8:57   ` Roger Quadros
2017-11-15  9:32     ` Ladislav Michl
2017-11-15 15:19   ` Sebastian Reichel
2017-11-11 21:24 ` [PATCH v4 11/16] mtd: onenand: omap2: Do not make delay for GPIO OMAP3 specific Ladislav Michl
2017-11-15  9:31   ` Roger Quadros
2017-11-15 15:20   ` Sebastian Reichel
2017-11-11 21:24 ` [PATCH v4 12/16] mtd: onenand: omap2: Enable DMA by default Ladislav Michl
2017-11-15 10:08   ` Roger Quadros
2017-11-15 10:32     ` Ladislav Michl
2017-11-15 10:43       ` Roger Quadros
2017-11-27 18:21         ` Ladislav Michl
2017-11-15 10:44       ` Roger Quadros
2017-11-11 21:26 ` Ladislav Michl [this message]
2017-11-15 10:13   ` [PATCH v4 13/16] memory: omap-gpmc: Refactor OneNAND support Roger Quadros
2017-11-15 10:37     ` Ladislav Michl
2017-11-11 21:27 ` [PATCH v4 14/16] mtd: onenand: omap2: Configure driver from DT Ladislav Michl
2017-11-15 10:40   ` Roger Quadros
2017-11-15 10:53     ` Ladislav Michl
2017-11-15 11:04       ` Roger Quadros
2017-11-15 11:20         ` Ladislav Michl
2017-11-15 14:41           ` Roger Quadros
2017-11-11 21:29 ` [PATCH v4 15/16] ARM: OMAP2+: Remove gpmc-onenand Ladislav Michl
2017-11-14 21:41   ` Tony Lindgren
2017-11-15 10:46   ` Roger Quadros
2017-11-11 21:29 ` [PATCH v4 16/16] ARM: dts: Nokia: Use R/B pin Ladislav Michl
2017-11-14 21:42   ` Tony Lindgren
2017-11-14 22:46     ` Ladislav Michl
2017-11-14 21:48 ` [PATCH v4 00/16] OMAP2+ OneNAND driver update Tony Lindgren
2017-11-14 22:53   ` Ladislav Michl
2017-11-15  8:10 ` Peter Ujfalusi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171111212612.ynj6ckbu4u2n5i7d@lenoch \
    --to=ladis@linux-mips.org \
    --cc=boris.brezillon@free-electrons.com \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=peter.ujfalusi@ti.com \
    --cc=rogerq@ti.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox