public inbox for linux-mtd@lists.infradead.org
 help / color / mirror / Atom feed
From: Ladislav Michl <ladis@linux-mips.org>
To: linux-mtd@lists.infradead.org, linux-omap@vger.kernel.org
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>,
	Roger Quadros <rogerq@ti.com>,
	Peter Ujfalusi <peter.ujfalusi@ti.com>,
	Kyungmin Park <kyungmin.park@samsung.com>,
	Aaro Koskinen <aaro.koskinen@iki.fi>,
	Tony Lindgren <tony@atomide.com>
Subject: [PATCH v6 02/14] ARM: dts: OMAP2+: Add compatible property to onenand node
Date: Fri, 12 Jan 2018 14:12:56 +0100	[thread overview]
Message-ID: <20180112131256.GC13810@lenoch> (raw)
In-Reply-To: <20180112131105.GA13810@lenoch>

OMAP onenand nodes are missing compatible property, add it.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
---

Changes in v6: None
Changes in v5: None
Changes in v4:
- new patch

Changes in v3: None
Changes in v2: None

 arch/arm/boot/dts/omap2420-n8x0-common.dtsi | 1 +
 arch/arm/boot/dts/omap3-n900.dts            | 1 +
 arch/arm/boot/dts/omap3-n950-n9.dtsi        | 1 +
 arch/arm/boot/dts/omap3430-sdp.dts          | 1 +
 4 files changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
index 1df3ace3af92..63b0b4921e4e 100644
--- a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
+++ b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
@@ -52,6 +52,7 @@
 	onenand@0,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
+		compatible = "ti,omap2-onenand";
 		reg = <0 0 0x20000>;	/* CS0, offset 0, IO size 128K */
 
 		gpmc,sync-read;
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index f5700ff231db..a1e6307ae21e 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -840,6 +840,7 @@
 	onenand@0,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
+		compatible = "ti,omap2-onenand";
 		reg = <0 0 0x20000>;	/* CS0, offset 0, IO size 128K */
 
 		gpmc,sync-read;
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index 12fbb3da5fce..0d9b85317529 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -367,6 +367,7 @@
 	onenand@0,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
+		compatible = "ti,omap2-onenand";
 		reg = <0 0 0x20000>;	/* CS0, offset 0, IO size 128K */
 
 		gpmc,sync-read;
diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
index 908951eb5943..d652708f6bef 100644
--- a/arch/arm/boot/dts/omap3430-sdp.dts
+++ b/arch/arm/boot/dts/omap3430-sdp.dts
@@ -154,6 +154,7 @@
 		linux,mtd-name= "samsung,kfm2g16q2m-deb8";
 		#address-cells = <1>;
 		#size-cells = <1>;
+		compatible = "ti,omap2-onenand";
 		reg = <2 0 0x20000>;	/* CS2, offset 0, IO size 4 */
 
 		gpmc,device-width = <2>;
-- 
2.15.1

  parent reply	other threads:[~2018-01-12 13:13 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-12 13:11 [PATCH v6 00/14] OMAP2+ OneNAND driver update Ladislav Michl
2018-01-12 13:11 ` [PATCH v6 01/14] dt-bindings: mtd: gpmc-onenand: Update properties description Ladislav Michl
2018-01-12 13:12 ` Ladislav Michl [this message]
2018-01-12 13:13 ` [PATCH v6 03/14] ARM: dts: omap3-igep: Update onenand node timings Ladislav Michl
2018-01-12 13:13 ` [PATCH v6 04/14] mtd: onenand: omap2: Remove regulator support Ladislav Michl
2018-01-12 13:13 ` [PATCH v6 05/14] mtd: onenand: omap2: Remove skip initial unlocking support Ladislav Michl
2018-01-12 13:14 ` [PATCH v6 06/14] mtd: onenand: omap2: Remove partitioning support from platform data Ladislav Michl
2018-01-12 13:14 ` [PATCH v6 07/14] mtd: onenand: omap2: Account waiting time as waiting on IO Ladislav Michl
2018-01-12 13:15 ` [PATCH v6 08/14] mtd: onenand: omap2: Simplify the DMA setup for various paths Ladislav Michl
2018-01-12 13:15 ` [PATCH v6 09/14] mtd: onenand: omap2: Unify OMAP2 and OMAP3 DMA implementation Ladislav Michl
2018-01-12 13:16 ` [PATCH v6 10/14] mtd: onenand: omap2: Convert to use dmaengine for memcpy Ladislav Michl
2018-01-12 13:16 ` [PATCH v6 11/14] mtd: onenand: omap2: Do not make delay for GPIO OMAP3 specific Ladislav Michl
2018-01-12 13:16 ` [PATCH v6 12/14] mtd: onenand: omap2: Decouple DMA enabling from INT pin availability Ladislav Michl
2018-01-12 13:46   ` Roger Quadros
2018-01-12 13:56     ` Roger Quadros
2018-01-12 13:17 ` [PATCH v6 13/14] mtd: onenand: omap2: Configure driver from DT Ladislav Michl
2018-01-12 13:47   ` Roger Quadros
2018-12-22  1:02   ` Aaro Koskinen
2018-12-22 10:19     ` Ladislav Michl
2018-12-23 12:51       ` Aaro Koskinen
2018-12-23 15:56         ` Tony Lindgren
2018-01-12 13:18 ` [PATCH v6 14/14] ARM: OMAP2+: Remove gpmc-onenand Ladislav Michl
2018-01-12 14:03 ` [PATCH v6 00/14] OMAP2+ OneNAND driver update Boris Brezillon
2018-01-12 14:20   ` Tony Lindgren
2018-01-12 15:03   ` Roger Quadros
2018-01-13 17:31 ` Boris Brezillon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180112131256.GC13810@lenoch \
    --to=ladis@linux-mips.org \
    --cc=aaro.koskinen@iki.fi \
    --cc=boris.brezillon@free-electrons.com \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=peter.ujfalusi@ti.com \
    --cc=rogerq@ti.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox