From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Thu, 22 Feb 2018 10:46:18 +0100 From: Boris Brezillon To: Miquel Raynal , Arnd Bergmann Cc: Richard Weinberger , David Woodhouse , Brian Norris , Marek Vasut , Cyrille Pitchen , linux-mtd@lists.infradead.org, Daniel Mack , Haojian Zhuang , Robert Jarzmik , Eric Miao , Ezequiel Garcia , , Gregory Clement , Thomas Petazzoni , Antoine Tenart , Nadav Haklai , linux-arm-kernel Subject: Re: [PATCH v4 5/6] arm: dts: pxa: use reworked NAND controller driver Message-ID: <20180222104618.1ff78b52@bbrezillon> In-Reply-To: <20180219223557.2458-6-miquel.raynal@bootlin.com> References: <20180219223557.2458-1-miquel.raynal@bootlin.com> <20180219223557.2458-6-miquel.raynal@bootlin.com> MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , +Arnd and the LAKML Hi Miquel, Please try to Cc the LAKML and the arm-soc maintainers when you send DT changes. Arnd, Robert, I'd like to apply this patch through the MTD tree since it depends on patch 1 of this series ("mtd: nand: use Marvell reworked NAND controller driver with all platforms"). Otherwise, I can leave it to Robert for 4.18. Let me know what you prefer. Thanks, Boris On Mon, 19 Feb 2018 23:35:56 +0100 Miquel Raynal wrote: > Use the new bindings of the reworked Marvell NAND controller driver. > > Signed-off-by: Miquel Raynal > --- > arch/arm/boot/dts/pxa3xx.dtsi | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi > index 55c75b67351c..982d1a62661d 100644 > --- a/arch/arm/boot/dts/pxa3xx.dtsi > +++ b/arch/arm/boot/dts/pxa3xx.dtsi > @@ -117,15 +117,15 @@ > status = "disabled"; > }; > > - nand0: nand@43100000 { > - compatible = "marvell,pxa3xx-nand"; > + nand_controller: nand-controller@43100000 { > + compatible = "marvell,pxa3xx-nand-controller"; > reg = <0x43100000 90>; > interrupts = <45>; > clocks = <&clks CLK_NAND>; > dmas = <&pdma 97 3>; > dma-names = "data"; > #address-cells = <1>; > - #size-cells = <1>; > + #size-cells = <0>; > status = "disabled"; > }; > -- Boris Brezillon, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering https://bootlin.com