From: Stefan Agner <stefan@agner.ch>
To: miquel.raynal@free-electrons.com, boris.brezillon@free-electrons.com
Cc: computersforpeace@gmail.com, dwmw2@infradead.org,
marek.vasut@gmail.com, cyrille.pitchen@wedev4u.fr,
richard@nod.at, bpringlemeir@gmail.com,
marcel.ziswiler@toradex.com, linux-mtd@lists.infradead.org,
stefan@agner.ch
Subject: [PATCH v6 0/3] mtd: rawnand: vf610_nfc: make use of ->exec_op()
Date: Sat, 3 Mar 2018 23:22:34 +0100 [thread overview]
Message-ID: <20180303222237.902-1-stefan@agner.ch> (raw)
Sixth revision of the rework patchset to use exec_op for NXP
Vybrid (and others) NAND Flash Controller. The most important
change tries to implement a nicer way of handling the endianness
hack.
The driver now passes all MTD tests. The approximate write/read
speed measured by mtd_speedtest is still looking good:
write read
original: 4036 KiB/s 13741 KiB/s
v2: 3495 KiB/s 13490 KiB/s
v3: 4469 KiB/s 13490 KiB/s
v5: 4440 KiB/s 13834 KiB/s
--
Stefan
Changes in v6:
- Checkpatch style fixes
- Subject change
Changes in v5:
- Fix COMMAND_NADDR_BYTES macro (fixes oob/page test issues)
- Renamed page_access to data_access
- Removed unclear debugging messages
- Introduce vf610_nfc_fill_row to avoid code dupplication in
vf610_nfc_(read|write)_page
- Add patch to enable ONFI SET/GET_FEATURES
- Comment/commit message fixes
Changes in v4:
- Rebased to nand/next
- Simplify filling of address cycles
- Use accessors for SRAM (vf610_nfc_rd_from_sram/vf610_nfc_wr_to_sram)
- Use two op-parser patterns to avoid a single command reading and writing
in a single operation
- Implement (read|write)_(page|oob)[_raw] to set page_access
- Set and clear vf610_nfc_ecc_mode in ecc (read|write)_page
- Clear/set 16-bit config when 16-bit bus is used and 8-bit access is
requested
Changes in v3:
- Separate exec_op() callback addition and removal of old callbacks
- Push data into regs in one function
- Readd op parser
- Implement custom read/write page for hardware ECC
- Rely on generic ecc.write_page_raw
- Use nand_read_oob_op instead of nand_read_page_op
*** BLURB HERE ***
Stefan Agner (3):
mtd: rawnand: vf610_nfc: make use of ->exec_op()
mtd: rawnand: vf610_nfc: remove old hooks
mtd: rawnand: vf610_nfc: support ONFI SET/GET_FEATURES commands
drivers/mtd/nand/raw/vf610_nfc.c | 624 +++++++++++++++++++++++----------------
1 file changed, 372 insertions(+), 252 deletions(-)
--
2.16.2
next reply other threads:[~2018-03-03 22:22 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-03 22:22 Stefan Agner [this message]
2018-03-03 22:22 ` [PATCH v6 1/3] mtd: rawnand: vf610_nfc: make use of ->exec_op() Stefan Agner
2018-03-05 16:28 ` Boris Brezillon
2018-03-03 22:22 ` [PATCH v6 2/3] mtd: rawnand: vf610_nfc: remove old hooks Stefan Agner
2018-03-03 22:22 ` [PATCH v6 3/3] mtd: rawnand: vf610_nfc: support ONFI SET/GET_FEATURES commands Stefan Agner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180303222237.902-1-stefan@agner.ch \
--to=stefan@agner.ch \
--cc=boris.brezillon@free-electrons.com \
--cc=bpringlemeir@gmail.com \
--cc=computersforpeace@gmail.com \
--cc=cyrille.pitchen@wedev4u.fr \
--cc=dwmw2@infradead.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marcel.ziswiler@toradex.com \
--cc=marek.vasut@gmail.com \
--cc=miquel.raynal@free-electrons.com \
--cc=richard@nod.at \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox