linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Boris Brezillon <boris.brezillon@bootlin.com>
To: "Rafał Miłecki" <zajec5@gmail.com>
Cc: "Brian Norris" <computersforpeace@gmail.com>,
	"David Woodhouse" <dwmw2@infradead.org>,
	"Boris Brezillon" <boris.brezillon@free-electrons.com>,
	"Marek Vasut" <marek.vasut@gmail.com>,
	"Richard Weinberger" <richard@nod.at>,
	"Cyrille Pitchen" <cyrille.pitchen@wedev4u.fr>,
	"Rafał Miłecki" <rafal@milecki.pl>,
	linux-mtd@lists.infradead.org,
	"Jonas Gorski" <jonas.gorski@gmail.com>
Subject: Re: [PATCH] mtd: move code adding (registering) partitions to the parse_mtd_partitions()
Date: Mon, 7 May 2018 10:06:03 +0200	[thread overview]
Message-ID: <20180507100603.178355b3@bbrezillon> (raw)
In-Reply-To: <20180327203541.1118-1-zajec5@gmail.com>

On Tue, 27 Mar 2018 22:35:41 +0200
Rafał Miłecki <zajec5@gmail.com> wrote:

> From: Rafał Miłecki <rafal@milecki.pl>
> 
> This commit slightly simplifies the code. Every parse_mtd_partitions()
> caller (out of two existing ones) had to add partitions & cleanup parser
> on its own. This moves that responsibility into the function.
> 
> That change also allows dropping struct mtd_partitions argument.
> 
> There is one minor behavior change caused by this cleanup. If
> parse_mtd_partitions() fails to add partitions (add_mtd_partitions()
> return an error) then mtd_device_parse_register() will still try to
> add (register) fallback partitions. It's a real corner case affecting
> one of uncommon error paths and shouldn't cause any harm.

This sounds reasonable.

> 
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
>  drivers/mtd/mtdcore.c | 14 ++++----------
>  drivers/mtd/mtdcore.h |  1 -
>  drivers/mtd/mtdpart.c | 44 ++++++++++++++++----------------------------
>  3 files changed, 20 insertions(+), 39 deletions(-)
> 
> diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
> index 20d5262c5b5c..7ad9f3a16866 100644
> --- a/drivers/mtd/mtdcore.c
> +++ b/drivers/mtd/mtdcore.c
> @@ -690,7 +690,6 @@ int mtd_device_parse_register(struct mtd_info *mtd, const char * const *types,
>  			      const struct mtd_partition *parts,
>  			      int nr_parts)
>  {
> -	struct mtd_partitions parsed = { };
>  	int ret;
>  
>  	mtd_set_dev_defaults(mtd);
> @@ -702,13 +701,10 @@ int mtd_device_parse_register(struct mtd_info *mtd, const char * const *types,
>  	}
>  
>  	/* Prefer parsed partitions over driver-provided fallback */
> -	ret = parse_mtd_partitions(mtd, types, &parsed, parser_data);
> -	if (!ret && parsed.nr_parts) {
> -		parts = parsed.parts;
> -		nr_parts = parsed.nr_parts;
> -	}
> -
> -	if (nr_parts)
> +	ret = parse_mtd_partitions(mtd, types, parser_data);
> +	if (ret > 0)
> +		ret = 0;
> +	else if (nr_parts)
>  		ret = add_mtd_partitions(mtd, parts, nr_parts);
>  	else if (!device_is_registered(&mtd->dev))
>  		ret = add_mtd_device(mtd);
> @@ -734,8 +730,6 @@ int mtd_device_parse_register(struct mtd_info *mtd, const char * const *types,
>  	}
>  
>  out:
> -	/* Cleanup any parsed partitions */
> -	mtd_part_parser_cleanup(&parsed);
>  	if (ret && device_is_registered(&mtd->dev))
>  		del_mtd_device(mtd);
>  
> diff --git a/drivers/mtd/mtdcore.h b/drivers/mtd/mtdcore.h
> index 37accfd0400e..9887bda317cd 100644
> --- a/drivers/mtd/mtdcore.h
> +++ b/drivers/mtd/mtdcore.h
> @@ -15,7 +15,6 @@ int del_mtd_partitions(struct mtd_info *);
>  struct mtd_partitions;
>  
>  int parse_mtd_partitions(struct mtd_info *master, const char * const *types,
> -			 struct mtd_partitions *pparts,
>  			 struct mtd_part_parser_data *data);
>  
>  void mtd_part_parser_cleanup(struct mtd_partitions *parts);
> diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
> index 023516a63276..f8d3a015cdad 100644
> --- a/drivers/mtd/mtdpart.c
> +++ b/drivers/mtd/mtdpart.c
> @@ -335,20 +335,7 @@ static inline void free_partition(struct mtd_part *p)
>   */
>  static int mtd_parse_part(struct mtd_part *slave, const char *const *types)
>  {
> -	struct mtd_partitions parsed;
> -	int err;
> -
> -	err = parse_mtd_partitions(&slave->mtd, types, &parsed, NULL);
> -	if (err)
> -		return err;
> -	else if (!parsed.nr_parts)
> -		return -ENOENT;
> -
> -	err = add_mtd_partitions(&slave->mtd, parsed.parts, parsed.nr_parts);
> -
> -	mtd_part_parser_cleanup(&parsed);
> -
> -	return err;
> +	return parse_mtd_partitions(&slave->mtd, types, NULL);
>  }
>  
>  static struct mtd_part *allocate_partition(struct mtd_info *parent,
> @@ -933,30 +920,27 @@ static int mtd_part_of_parse(struct mtd_info *master,
>  }
>  
>  /**
> - * parse_mtd_partitions - parse MTD partitions
> + * parse_mtd_partitions - parse and register MTD partitions
> + *
>   * @master: the master partition (describes whole MTD device)
>   * @types: names of partition parsers to try or %NULL
> - * @pparts: info about partitions found is returned here
>   * @data: MTD partition parser-specific data
>   *
> - * This function tries to find partition on MTD device @master. It uses MTD
> - * partition parsers, specified in @types. However, if @types is %NULL, then
> - * the default list of parsers is used. The default list contains only the
> + * This function tries to find & register partitions on MTD device @master. It
> + * uses MTD partition parsers, specified in @types. However, if @types is %NULL,
> + * then the default list of parsers is used. The default list contains only the
>   * "cmdlinepart" and "ofpart" parsers ATM.
>   * Note: If there are more then one parser in @types, the kernel only takes the
>   * partitions parsed out by the first parser.
>   *
>   * This function may return:
>   * o a negative error code in case of failure
> - * o zero otherwise, and @pparts will describe the partitions, number of
> - *   partitions, and the parser which parsed them. Caller must release
> - *   resources with mtd_part_parser_cleanup() when finished with the returned
> - *   data.
> + * o number of found partitions otherwise
>   */
>  int parse_mtd_partitions(struct mtd_info *master, const char *const *types,
> -			 struct mtd_partitions *pparts,
>  			 struct mtd_part_parser_data *data)
>  {
> +	struct mtd_partitions pparts = { };
>  	struct mtd_part_parser *parser;
>  	int ret, err = 0;
>  
> @@ -970,7 +954,7 @@ int parse_mtd_partitions(struct mtd_info *master, const char *const *types,
>  		 * handled in a separated function.
>  		 */
>  		if (!strcmp(*types, "ofpart")) {
> -			ret = mtd_part_of_parse(master, pparts);
> +			ret = mtd_part_of_parse(master, &pparts);
>  		} else {
>  			pr_debug("%s: parsing partitions %s\n", master->name,
>  				 *types);
> @@ -981,13 +965,17 @@ int parse_mtd_partitions(struct mtd_info *master, const char *const *types,
>  				parser ? parser->name : NULL);
>  			if (!parser)
>  				continue;
> -			ret = mtd_part_do_parse(parser, master, pparts, data);
> +			ret = mtd_part_do_parse(parser, master, &pparts, data);
>  			if (ret <= 0)
>  				mtd_part_parser_put(parser);
>  		}
>  		/* Found partitions! */
> -		if (ret > 0)
> -			return 0;
> +		if (ret > 0) {
> +			err = add_mtd_partitions(master, pparts.parts,
> +						 pparts.nr_parts);
> +			mtd_part_parser_cleanup(&pparts);
> +			return err ? err : pparts.nr_parts;
> +		}
>  		/*
>  		 * Stash the first error we see; only report it if no parser
>  		 * succeeds

  reply	other threads:[~2018-05-07  8:06 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-27 20:35 [PATCH] mtd: move code adding (registering) partitions to the parse_mtd_partitions() Rafał Miłecki
2018-05-07  8:06 ` Boris Brezillon [this message]
2018-05-09 15:53 ` Boris Brezillon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180507100603.178355b3@bbrezillon \
    --to=boris.brezillon@bootlin.com \
    --cc=boris.brezillon@free-electrons.com \
    --cc=computersforpeace@gmail.com \
    --cc=cyrille.pitchen@wedev4u.fr \
    --cc=dwmw2@infradead.org \
    --cc=jonas.gorski@gmail.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marek.vasut@gmail.com \
    --cc=rafal@milecki.pl \
    --cc=richard@nod.at \
    --cc=zajec5@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).