From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail.bootlin.com ([62.4.15.54]) by bombadil.infradead.org with esmtp (Exim 4.90_1 #2 (Red Hat Linux)) id 1fIbZd-0008O0-0I for linux-mtd@lists.infradead.org; Tue, 15 May 2018 15:09:25 +0000 From: Boris Brezillon To: David Woodhouse , Brian Norris , Boris Brezillon , Marek Vasut , Richard Weinberger , linux-mtd@lists.infradead.org, Miquel Raynal Cc: Peter Pan , Frieder Schrempf , Vignesh R , Xiangsheng Hou Subject: [PATCH v7 1/5] mtd: nand: Pass mode information to nand_page_io_req Date: Tue, 15 May 2018 17:08:21 +0200 Message-Id: <20180515150825.19835-2-boris.brezillon@bootlin.com> In-Reply-To: <20180515150825.19835-1-boris.brezillon@bootlin.com> References: <20180515150825.19835-1-boris.brezillon@bootlin.com> List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , The NAND sub-layers are likely to need the MTD_OPS_XXX mode information in order to decide if they should enable/disable ECC or how they should place the OOB bytes in the provided OOB buffer. Add a field to nand_page_io_req to pass this information. Signed-off-by: Boris Brezillon --- include/linux/mtd/nand.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 792ea5c26329..abe975c87b90 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -86,6 +86,7 @@ struct nand_pos { * @ooboffs: the OOB offset within the page * @ooblen: the number of OOB bytes to read from/write to this page * @oobbuf: buffer to store OOB data in or get OOB data from + * @mode: one of the %MTD_OPS_XXX mode * * This object is used to pass per-page I/O requests to NAND sub-layers. This * way all useful information are already formatted in a useful way and @@ -106,6 +107,7 @@ struct nand_page_io_req { const void *out; void *in; } oobbuf; + int mode; }; /** @@ -599,6 +601,7 @@ static inline void nanddev_io_iter_init(struct nand_device *nand, { struct mtd_info *mtd = nanddev_to_mtd(nand); + iter->req.mode = req->mode; iter->req.dataoffs = nanddev_offs_to_pos(nand, offs, &iter->req.pos); iter->req.ooboffs = req->ooboffs; iter->oobbytes_per_page = mtd_oobavail(mtd, req); -- 2.14.1